timss

THANKS FOR FEEDBack USB and interface on BIOS ez NOT WORKING WITH usb BUT did work with CD tHERE IS NO os ON THE DISK JUST NOW mANY THANKS XSTATION

here we go its inside the zip file http://support.asus.com/Download.aspx?SLanguage=en&p=1&s=39&m=Maximus%20IV%20GENE-Z&os=30&ft=3&f_name=MaximusIV-GENE-Z-ASUS-0902.zip#MaximusIV-GENE-Z-ASUS-0902.zip thanks xstation

i need to burn BIOS update to disk its 8.xx mb USB stick does not work thankyou xstation

many thanks cleaning the lens and change spped saw excellent results thankyou xstation

I tried at x3 then on veryfing at 90% here is the log I 11:22:31 ImgBurn Version 2.5.6.0 started! I 11:22:31 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 11:22:31 Total Physical Memory: 719,856 KB - Available: 482,528 KB W 11:22:31 Drive C:\ (FAT32) does not support single files > 4 GB in size. W 11:22:31 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 11:22:31 Initialising SPTI... I 11:22:31 Searching for SCSI / ATAPI devices... I 11:22:32 -> Drive 1 - Info: TSSTcorp DVD+-RW TS-L632D DE03 (E:) (ATA) I 11:22:32 Found 1 DVD±RW! I 11:22:55 Operation Started! I 11:22:55 Source Device: [1:0:0] TSSTcorp DVD+-RW TS-L632D DE03 (E:) (ATA) I 11:22:55 Source Media Type: CD-R I 11:22:55 Source Media Supported Write Speeds: 4x, 10x, 16x, 20x, 24x I 11:22:55 Image File: C:\Documents and Settings\amma\My Documents\Downloads\ubuntu-11.10-desktop-i386 (2).iso I 11:22:55 Image File Sectors: 355,990 (MODE1/2048) I 11:22:55 Image File Size: 729,067,520 bytes I 11:22:55 Image File Volume Identifier: Ubuntu 11.10 i38 I 11:22:55 Image File File System(s): ISO9660 (Bootable), Joliet I 11:22:55 Read Speed (Data/Audio): MAX / MAX I 11:22:56 Verifying Session 1 of 1... (1 Track, LBA: 0 - 355989) I 11:22:56 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 355989) W 11:27:15 Failed to Read Sector 320870 - Reason: L-EC Uncorrectable Error W 11:27:15 Sector 320870 maps to File: \casper\filesystem.squashfs E 11:30:30 Failed to Read Sector 320870 - Reason: L-EC Uncorrectable Error E 11:30:30 Sector 320870 maps to File: \casper\filesystem.squashfs E 11:30:30 Failed to Verify Sectors! I 11:30:35 Exporting Graph Data... I 11:30:35 Graph Data File: C:\Documents and Settings\amma\Application Data\ImgBurn\Graph Data Files\TSSTcorp_DVD+-RW_TS-L632D_DE03_THURSDAY-FEBRUARY-09-2012_11-22_AM_N-A.ibg I 11:30:35 Export Successfully Completed! E 11:30:35 Operation Failed! - Duration: 00:07:35 I 11:30:35 Average Verify Rate: 1,416 KB/s (9.4x) - Maximum Verify Rate: 3,589 KB/s (23.9x)

Every time i burn then same result always a empty disk I 15:42:57 ImgBurn Version 2.5.6.0 started! I 15:42:57 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 15:42:57 Total Physical Memory: 719,856 KB - Available: 489,868 KB W 15:42:57 Drive C:\ (FAT32) does not support single files > 4 GB in size. W 15:42:57 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 15:42:57 Initialising SPTI... I 15:42:57 Searching for SCSI / ATAPI devices... I 15:43:02 -> Drive 1 - Info: TSSTcorp DVD+-RW TS-L632D DE03 (E:) (ATA) I 15:43:02 Found 1 DVD±RW! I 15:43:19 Operation Started! I 15:43:19 Source File: C:\Documents and Settings\amma\My Documents\Downloads\ubuntu-11.10-desktop-i386 (2).iso I 15:43:19 Source File Sectors: 355,990 (MODE1/2048) I 15:43:19 Source File Size: 729,067,520 bytes I 15:43:19 Source File Volume Identifier: Ubuntu 11.10 i38 I 15:43:19 Source File File System(s): ISO9660 (Bootable), Joliet I 15:43:19 Destination Device: [1:0:0] TSSTcorp DVD+-RW TS-L632D DE03 (E:) (ATA) I 15:43:19 Destination Media Type: CD-R (Disc ID: 97m17s06f, Moser Baer India) I 15:43:19 Destination Media Supported Write Speeds: 4x, 10x, 16x, 20x, 24x I 15:43:19 Destination Media Sectors: 359,847 I 15:43:19 Write Mode: CD I 15:43:19 Write Type: SAO I 15:43:19 Write Speed: MAX I 15:43:19 Lock Volume: Yes I 15:43:19 Test Mode: No I 15:43:19 OPC: No I 15:43:19 BURN-Proof: Enabled I 15:43:19 Write Speed Successfully Set! - Effective: 4,234 KB/s (24x) I 15:43:19 Filling Buffer... (20 MB) I 15:43:20 Writing LeadIn... I 15:43:53 Writing Session 1 of 1... (1 Track, LBA: 0 - 355989) I 15:43:53 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 355989) I 15:48:14 Synchronising Cache... I 15:48:47 Exporting Graph Data... I 15:48:47 Graph Data File: C:\Documents and Settings\amma\Application Data\ImgBurn\Graph Data Files\TSSTcorp_DVD+-RW_TS-L632D_DE03_TUESDAY-FEBRUARY-07-2012_3-43_PM_97m17s06f_MAX.ibg I 15:48:47 Export Successfully Completed! I 15:48:47 Operation Successfully Completed! - Duration: 00:05:27 I 15:48:47 Average Write Rate: 2,738 KB/s (18.3x) - Maximum Write Rate: 3,641 KB/s (24.3x) I 15:48:47 Cycling Tray before Verify... W 15:49:13 Waiting for device to become ready... I 15:49:30 Device Ready! E 15:49:30 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0) E 15:49:30 Verify Failed! - Reason: Layouts do not match. thanks for any feedback xstation

i am trying to burn to a dvd disk The disk is a verbatim dvd+rw 4x verbatim #43228 0707-02 win xp service pack 2 the device is a TSST corp DVD+-RW TS-L632D DE03 (ATA) Every time place a blank unused DVD into the drive I am informed it needs formatting it starts to format to 100% but then says its earaing disk i waited for 1 hour then stopped the program. tims

I burnt a knoppix image to a DVD WITH VERSION 2.4.0.0 I booted into the cd and got these messages as did i when i ran it from vmware. While the dvd was burning I was making a cup of tea when I returned the cd drive was open. here are the error messages(not from the burning process but from boot) hdc cdrom_decode_status status=0x5 (seekcomplete error) hdc cdrom_decode_status error=0x40 (lastfailed sense=0x04) then ide = failed opcode was=unkonwn thanks for any feedback timss

Thanks for the suggestion i altered the file extension and that worked thanks tim

ok i added the .iso at the end but still invaild or unsupported file format the file is called rEFIt-0.11.iso i notice in proerties its a CDR file type i siad that already i know but i thought renameing it would change the file type in properties tim

I am trying to burn what i hope might be a iso image i got the file from here http://refit.sourceforge.net/ as you can see there are four options i choose the iso image the file is in fact a .gz file which i extected in ubuntu and inside is a CDR file i followed the format for burning a iso ( mode: write , selected the CDR file but said invalid format (I am in xp when i burn) any suggestions please? tim

i think the answer to this is yes but i just make sure I have added a folder to the source box and just before burning this window appeared you've only seletcted 1 folder then if gies the path to that folder does the "programs folder represent the root directory of the image content? otherwise the programs folder will bbe visable in the root directory of the image tim

ok thanks there is a image in my c drive this is the information: I 11:47:48 ImgBurn Version 2.4.0.0 started! I 11:47:48 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 11:47:48 Total Physical Memory: 1,032,464 KB - Available: 703,120 KB W 11:47:48 Drive C:\ (FAT32) does not support single files > 4 GB in size. I 11:47:48 Initialising SPTI... I 11:47:48 Searching for SCSI / ATAPI devices... I 11:47:48 Found 1 DVD-ROM and 1 DVD±RW! I 11:56:07 Operation Started! I 11:56:07 Source Drive: E:\ I 11:56:07 Boot Image File: C:\BootImage.ima I 11:56:07 Creating Boot Image... I 11:56:07 Original Emulation Type: Floppy Disk (1.44 MB) I 11:56:07 Original Developer ID: Unknown I 11:56:07 Wrote 1,474,560 bytes to boot image file. I 11:56:07 Operation Successfully Completed! so now i want to burn it to a disk what do i place in the boot image box? the path to the boot image on my desktop i think then developer ID leave it blank then burn the image from the place in imgburn in the same menu i mean . tim

thanks for your continued help on this, here is what i have done sorry for making a mountain out of a mole hill. what i did was extracted the boot image to my desktop with ISO buster. Daemon opened on virtual E drive and it is now showing the disk icon as the boot image. I am in build mode and advanced . now under bootable disk which i inserted a tick in that box . under options emulation is the floppy image boot image c/bootimage.img develope ID + ? (NOT SURE WHAT TO PLACE HERE) then extract boot image = CDROM(E:) blank CD in cd ROM D drive. what should i do next ?

thanks for your help on this now there is one guy who sent me this email and want to know if what he is saying corresponds to what you have said. please understand his english is not the best. rescue.iso is the iso mentioned in the first thread of this post. --------------------------------------------email below You first may load the rescue.iso in ImgBurn. Then, find the "Advanced" tab and there - bootable options, and it will contain option "Extract floppy image" -so extract it and save as floopy.ima, for example. Then create a new project in ImgBurn - and go to the same tab, and choose bootable image as "Floppy" and *Load* the floopy.ima you saved. Then you'll have empty project with the same bootable track as original rescue.iso. Then you may add any you own data files (e.g., music or photos) - and burn it (do it with RW, I succeded only in the third time...) And then such CD appeared for me to be bootable. -------------------------------------- tim