Woody2005

I will do but I only had 2 verbatims and didn't save the reports and now struggling to get verbatims locally so will order some off net, try again and post logs as soon as poss. Thanks for your help.

Does the rest of the report read ok? I have tried different discs since this and it still is no good. Is there anything in the report that says I'm doing anything else wrong?? It's all gobbledegook to me tbh

Well thank you for the quick reply. I will try the verbatims and repost if probs continue. If you can't see anything wrong with the imgburn report then I'm happy to try the verbs. Thanks again and apologies for ruling that out so soon. It's just that I have over 300 of these and 95%. Thanks.

Hi guys, I used to use this programme a lot but haven't for about 2 years and now cant remember what I'm doing. I have just tried burning to disc but it failed at 50% through verification. Could somebody please tell me the problem. It's not the discs because I have always used these discs and have lots that all work fine. Many Thanks. I 16:35:07 ImgBurn Version 2.5.5.0 started! I 16:35:07 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 16:35:07 Total Physical Memory: 3,144,008 KB - Available: 2,079,584 KB W 16:35:07 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 16:35:07 Initialising SPTI... I 16:35:07 Searching for SCSI / ATAPI devices... I 16:35:08 -> Drive 1 - Info: DTSOFT BDROM 1.05 (M:) (Virtual) I 16:35:08 -> Drive 2 - Info: HL-DT-ST DVDRAM GH15F EG00 (E:) (Fibre) I 16:35:08 Found 1 DVD±RW/RAM and 1 BD-ROM! I 16:41:04 Operation Started! I 16:41:04 Source File: C:\Users\owner\Downloads\Splinter Cell Conviction\XboxPirate.com-Game24\SCConviction.CloudShadow-XP.dvd I 16:41:04 Source File Sectors: 3,827,488 (MODE1/2048) I 16:41:04 Source File Size: 7,838,695,424 bytes I 16:41:04 Source File Volume Identifier: DVD_ROM I 16:41:04 Source File Volume Set Identifier: ec67c000MS UDFBridge I 16:41:04 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 16:41:04 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 16:41:04 Source File File System(s): ISO9660, UDF (1.50) I 16:41:04 Destination Device: [3:2:0] HL-DT-ST DVDRAM GH15F EG00 (E:) (Fibre) I 16:41:04 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x, 8x) I 16:41:04 Destination Media Sectors: 4,173,824 I 16:41:04 Write Mode: DVD I 16:41:04 Write Type: DAO I 16:41:04 Write Speed: 2.4x I 16:41:04 Link Size: Auto I 16:41:04 Lock Volume: Yes I 16:41:04 Test Mode: No I 16:41:04 OPC: No I 16:41:04 BURN-Proof: Enabled I 16:41:04 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 16:41:04 Book Type Setting: N/A (Reason: Invalid Command Operation Code) I 16:41:04 Optimal L0 Data Zone Capacity: 1,913,760 I 16:41:04 Optimal L0 Data Zone Method: Copied From Original Disc I 16:41:46 Set L0 Data Zone Capacity Succeeded! I 16:41:48 Filling Buffer... (40 MB) I 16:41:49 Writing LeadIn... I 16:41:51 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 16:41:51 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 16:41:51 Writing Layer 0... (LBA: 0 - 1913759) I 17:01:29 Writing Layer 1... (LBA: 1913760 - 3827487) I 17:21:10 Synchronising Cache... I 17:21:11 Closing Track... I 17:21:13 Finalising Disc... I 17:22:09 Exporting Graph Data... I 17:22:09 Graph Data File: C:\Users\owner\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH15F_EG00_22-JULY-2011_16-41_RICOHJPN-D01-67_2.4x.ibg I 17:22:09 Export Successfully Completed! I 17:22:09 Operation Successfully Completed! - Duration: 00:41:05 I 17:22:09 Average Write Rate: 3,245 KB/s (2.3x) - Maximum Write Rate: 3,362 KB/s (2.4x) I 17:22:09 Cycling Tray before Verify... W 17:22:19 Waiting for device to become ready... I 17:22:42 Device Ready! I 17:22:44 Operation Started! I 17:22:44 Source Device: [3:2:0] HL-DT-ST DVDRAM GH15F EG00 (E:) (Fibre) I 17:22:44 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x, 8x) I 17:22:44 Image File: C:\Users\owner\Downloads\Splinter Cell Conviction\XboxPirate.com-Game24\SCConviction.CloudShadow-XP.dvd I 17:22:44 Image File Sectors: 3,827,488 (MODE1/2048) I 17:22:44 Image File Size: 7,838,695,424 bytes I 17:22:44 Image File Volume Identifier: DVD_ROM I 17:22:44 Image File Volume Set Identifier: ec67c000MS UDFBridge I 17:22:44 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 17:22:44 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 17:22:44 Image File File System(s): ISO9660, UDF (1.50) I 17:22:44 Read Speed (Data/Audio): MAX / MAX I 17:22:44 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 17:22:44 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 17:22:44 Verifying Layer 0... (LBA: 0 - 1913759) I 17:31:04 Verifying Layer 1... (LBA: 1913760 - 3827487) W 17:31:23 Failed to Read Sector 1913760 - Reason: Unrecovered Read Error W 17:31:46 Retrying (1)... W 17:31:52 Retry Failed - Reason: Unrecovered Read Error W 17:31:54 Failed to Read Sector 1913760 - Reason: Unrecovered Read Error W 17:32:00 Failed to Read Sector 1913761 - Reason: Unrecovered Read Error E 17:32:02 Failed to Read Sector 1913761 - Reason: Unrecovered Read Error E 17:32:02 Failed to Verify Sectors! I 17:32:03 Exporting Graph Data... I 17:32:03 Graph Data File: C:\Users\owner\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH15F_EG00_22-JULY-2011_16-41_RICOHJPN-D01-67_2.4x.ibg I 17:32:03 Export Successfully Completed! E 17:32:03 Operation Failed! - Duration: 00:09:18 I 17:32:03 Average Verify Rate: 6,859 KB/s (5.0x) - Maximum Verify Rate: 10,975 KB/s (7.9x)

Thanks to all who replied. It seems it was as simple as opening up a fresh pack of discs and using one of them. Sorry for being thick but I was trying to burn to the same disc as after it said it failed, it still said that the disc was empty so I assumed it would be O.K. Anyway, using different disc and it seems to be going fine now so thanks a lot and thanks for the burner update also, much appreciated guys!!!

Hi Thanks for reply, sorry didn't realise I cut any off, re-posted below in full. I've always used Aone discs, good for the money and been working without fail since I started getting into all this back in September but am happy to try Verbatim if you think they're worth the extra quid or so. Also, I don't think it's due to the file I'm trying to burn coz I've tried 3 or 4 different files all with the same response. Just never had a prob with imgburn before and been using it since September. Anyway, here is the log, hopefully in full: - thanks again. I 11:56:37 ImgBurn Version 2.4.2.0 started! I 11:56:37 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 11:56:37 Total Physical Memory: 523,756 KB - Available: 150,568 KB I 11:56:37 Initialising SPTI... I 11:56:37 Searching for SCSI / ATAPI devices... I 11:56:37 Found 2 DVD

Hi guys, been using Imgburn for some time now but all of a sudden without changing any settings or doing anything different, whenever I click to 'write' it's coming up saying 'Failed to set L O data zone capacity - Reason: Invalid field in CDB'. Does anybody know what this means or better still how to correct it. Would really appreciate help as up until now have been really impressed with IMGBurn. Thanks in advance. Here is my log, Sorry if I've posted it wrong but it's my first time here. I 11:57:35 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-02) (Speeds: 4x, 6x, 8x) I 11:57:35 Destination Media Sectors: 3,827,520 I 11:57:35 Write Mode: DVD I 11:57:35 Write Type: DAO I 11:57:35 Write Speed: 2.4x I 11:57:35 Link Size: Auto I 11:57:35 Test Mode: No I 11:57:35 OPC: No I 11:57:35 BURN-Proof: Enabled I 11:57:35 Book Type Setting: DVD-ROM I 11:57:35 Optimal L0 Data Zone Capacity: 1,913,760 I 11:57:35 Optimal L0 Data Zone Method: Copied From Original Disc E 11:57:36 Failed to set L0 Data Zone Capacity! E 11:57:36 Reason: Invalid Field in CDB E 11:57:36 Operation Failed! - Duration: 00:00:01 I 11:57:36 Average Write Rate: N/A - Maximum Write Rate: N/A Thanks again!