Jump to content

Cynthia

Beta Team Members
  • Posts

    6,588
  • Joined

  • Last visited

Everything posted by Cynthia

  1. IHAS124-19 Some burns with Verbatims on a similar model. http://forum.imgburn.com/index.php?showtopic=18871
  2. What model is it? A modern Lite-On burner shouldn't have any problems burning high quality media.
  3. The problem is your burner. Different write speeds might help (4x and 6x). A cleaning disc also - but as you ordered a new burner, save the cost of such a disc and just wait for the new one.
  4. Currently max is forcing it to use 6x. So you also have 8x, 12x, 16x to try with. Usually 8x might work best.
  5. There is a later firmware version for that burner KYS4 http://www.firmwarehq.com/Sony/DW-Q28A/files.html
  6. Looks to me as you need to select a layer break from the ImgBurn window you see to the left in your posted screen shot.
  7. Use this free program. http://www.dvdflick.net/
  8. Sounds as the player doesn't support PAL. http://en.wikipedia.org/wiki/PAL
  9. In what country/region do you live?
  10. It's a rather old burner so it's on the burners side. Might find another firmware that works with that media code on this page. http://liggydee.cdfreaks.com/page/en/
  11. Yes, it is a CD-RW disc. It is also Rewritable. The amount of data you try to burn on a CD is to much for it to store. You need to use a DVD disc, not a CD disc, as the program told you.
  12. The installed firmware in the burner has no support for that media code/disc id. Try with some more common like Verbatim AZO.
  13. It's like wrapping up Miss Piggy in a 36 sized dress. It will never work. Use a DVD disc instead.
  14. Thanks for the greetings! The only nice thing with getting older is that you need a bigger cake to get room for all the candles.
  15. No. Do this in the current version of ImgBurn to trigger the book type function. Look in this guide http://forum.imgburn.com/index.php?showtopic=6392&st=0&p=66934&&do=findComment&comment=66934 and jump to section 4.2.13.9 Advanced - replace the example in that one with these values: Select Samsung and add this string SAMSUNG DVDWBD SH-B083L
  16. Curious. Wouldn't it be possible to add the string SAMSUNG DVDWBD SH-B083L in the advanced box and see if it book types then? A rebadged Lite-On? http://www.cdrinfo.com/Sections/Reviews/Specific.aspx?ArticleId=27142 Looking at this thread - it seems to book type with firmware ver SB00. http://www.team-xecuter.com/forums/archive/index.php/t-63768.html
  17. In what program did you see that error code?
  18. Should be good media. Are they packed in Verbatim AZO label?
  19. http://www.digitalfaq.com/reviews/dvd-media.htm
  20. 4x generated a bad burn, that was detected during the verify phase. You could try 8x. If that also fails, try some better quality media like Verbatim. Seen a lot of burners that have a hard time burning the media code MBIPG101-R10-65.
  21. Looks to me as the LG has a problem to find a good write strategy above 12x and after some tries it decides to go for 12x on the rest of the burn. For the Ritek burn, either your burner only supports those at max 8x or you selected 8x as write speed. Pioneers are known to "jump" during the burn, so that graph looks like a normal one to me.Here is an example of a 16x write on one of my Pioneers. Only a quality scan test can show which one that burned best. The posted images only shows how the disc was written. Not how good the burns were.
  22. Looks to me as the disc was a bad burn and now it can't be read properly.
  23. Can you post the full log of that failed burn? http://forum.imgburn.com/index.php?showtopic=14632
  24. Only the part that is from that failed burn.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.