Jump to content

wishfull

Members
  • Content Count

    24
  • Joined

  • Last visited

About wishfull

  • Rank
    ISF Newbie
  1. wishfull

    Logical unit communication crc error

    All replies welcome! My post: Hardware check including cables, drivers up to date, board up to date etc...... All very basic. Any other advice?
  2. Could not find any help for this topic in the guides. Use 2x pc, one mainly for aud/vid, burning etc...Memory 2gb, cpu amd, 4x sata raid hd. This unit acts funny, did a hardware check, winxp sp3 and progs new installation after the error. Problem the same. 3 hours wasted. However, my second pc burns allright, cd-dvd. ------------------------------------------------------------------------------ Yesterday burning 3x dvd +R DL. Number 4 suddenly stops at about 6% and the message: logical unit communication crc error(ultr-dma/32). Understand that this is a transmitting error between the data on hd and the dvd disc and not imgburn. Yes, dvd drives all dma. Done some extra burning: different 4.7 dvd and 8.5, all +R and var content and dvd brand, also older iso files.. Only movie(vob) data dvds at about 6-12% stop and the error msg. Not cd/dvd and data/progs/pics. Format system partition and new installation winxp sp3 and firmware reinstall drive, no pos result with minimum prog install and/or full. Not some prog to blame. Windows drivers for hd, memory etc...and drives ok. Burn device LG. Yesterday, I have not changed anything in the system or installation before or after the burning errors. Any advise? Greetings,
  3. wishfull

    rpc1.org not resolving lately?

    Yes I know. Had to search this site for the tdb info. Where to find news about rpc1? Thanks
  4. wishfull

    rpc1.org not resolving lately?

    Hi, For about.......?
  5. wishfull

    Burning an ISO

    Q: How can I force IB to burn the first layer on a DL full(most) and the remaining on the second layer? Before burning a vid/data disc I make an ISO first after removing the locks when necessary. For burn convenience only. Burning an ISO about 7gb on a DL , the data is auto splitted by IB almost exactly in the half. 3.5gb on first layer and 3.5gb on the second. Have done some experiments and reading in manuals but unable to succeed or find any other usefull info, exept for a new build. Any advice welcome.
  6. wishfull

    Suggestion or Hint?

    Attn: Lightning UK Not sure I understand what you are saying? In all my progs, Windows included, the auto update is cancelled and only firewall and anti-vir are allowed. Auto update for Img is not necessary. Last 12-04-2007. In default Img updates every day-week....etc.. Done some adjutment in Img and back to default again, forgot check update to never. In general all my progs are blocked by the firewall for outgoing traffic or changing the registry and other uncommon behaviour, when not trusted or with limited permission to do so. Done a search and found an old Img log. The failure times correspond exactly with the old Outpost logs info times saying update blocked. This is why I thought the firewall/img combination is probably the reason. Since the adjustments in my first post, no more failure. For your info: (This is a log from a 8.5 disc write failure at 54% after a layer change at 50% and ImgBurn in Default) ; ImgBurn Version 2.3.2.0 - Log ; zondag, 14 oktober 2007, 13:11:20 I 12:43:01 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D00-01) (Speeds: 2,4x) I 12:43:01 Destination Media Sectors: 4.173.824 I 12:43:01 Write Mode: DVD I 12:43:01 Write Type: DAO I 12:43:01 Write Speed: MAX I 12:43:01 Link Size: Auto I 12:43:01 Test Mode: No I 12:43:01 BURN-Proof: Enabled W 12:43:03 Optimal L1 Data Zone Start LBA: None Found! (VTS_02) I 12:43:03 Optimal L0 Data Zone Capacity: 1.965.568 I 12:43:03 Optimal L0 Data Zone Method: ECC Block Boundary, VOBU Boundary I 12:43:32 Filling Buffer... (40 MB) I 12:43:33 Writing LeadIn... I 12:43:36 Writing Image... (LBA: 0 - 3924860) I 12:43:36 Writing Layer 0... (LBA: 0 - 1965567) I 13:03:44 Writing Layer 1... (LBA: 1965568 - 3924860) W 13:05:03 Failed to Write Sectors 2090336 - 2090367 - Unknown (Internal Target Failure) (0x44, 0x86) W 13:05:03 Retrying (1 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (2 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (3 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (4 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (5 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (6 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (7 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (8 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (9 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (10 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (11 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (12 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (13 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (14 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (15 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (16 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (17 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (18 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (19 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:05:03 Retrying (20 of 20)... W 13:05:03 Retry Failed - Invalid Address For Write W 13:08:45 Retrying (21)... W 13:08:45 Retry Failed - Invalid Address For Write E 13:08:52 Failed to Write Sectors 2090336 - 2090367 - Unknown (Internal Target Failure) (0x44, 0x86) I 13:08:52 Synchronising Cache... I 13:08:53 Closing Track... I 13:08:58 Finalising Disc... W 13:10:16 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Tracking Servo Failure E 13:10:45 Finalise Disc Failed! - Reason: Tracking Servo Failure I 13:10:45 Finalising Disc (Last Attempt!)... E 13:10:45 Failed to Write Image! E 13:10:45 Operation Failed! - Duration: 00:27:44 I 13:10:45 Average Write Rate: 2.757 KB/s (2.0x) - Maximum Write Rate: 3.360 KB/s (2.4x) I 13:11:20 Close Request Acknowledged I 13:11:20 Closing Down... I 13:11:20 Shutting down SPTI... I 13:11:20 ImgBurn closed! Greetings, Wishfull
  7. wishfull

    Suggestion or Hint?

    The importance of the following for your personal situation is unknown to me. Few weeks ago, burning an image there was a burn error about halfway saying: Address not found- wrong address etc.. Twice successively, one 8.5 and one 4.7gb. Two discs in the waste bin. Before this ImgBurn all in default. Done some checks and in the logs of my software firewall(Outpost) I found: "Outgoing blocked" and more. My firewall blocked ImgBurn/DVDDecrypter complete when burning a disc and when it made an attempt to update or whatever triggered the firewall, perhaps this could have been the problem in the past. First: Changed ImgBurn and DVDDecrypter in trusted progs. Second: I changed the settings of Img in: Events>check for program update>never. For DVDdecrypter: Settings>events>uncheck "check for program update". No errors since. Greetings, Wishfull
  8. wishfull

    (UDF)Implementation id

    Attn: Lightning and Blu 1. Know how to remove this info after your advise. Understand that the purpose of this information in the files is of no value for the user(player) of the ISO. 2. I suppose, random letters are okay. So why are these progs not adding some random info? Who is happy to know what prog fabricated this ISO, since ISO is a general standard?
  9. wishfull

    (UDF)Implementation id

    Attn: LIGHTNING UK Thank you for your reply. I understand that the prog what is used for the ISO is responsible(adding) for this info? Some kind of innocent Adware? Greetings, ..........
  10. wishfull

    (UDF)Implementation id

    (Sorry, could not find a topic on this subject) Using a prog like DVDInfoPro there is information avail about the inserted cd/dvd. Sample: UDF implementation id DVD Shrink, DVD2One or IMGBurn etc... Depends what prog is used for the ISO. Where do I find this info in the ISO or more precise, how do I avoid that this information is added in the ISO and/or burned on the disc? Any suggestion welcome, Greetings
  11. wishfull

    ImgBurn 2.2.0.0 Bug

    I understand that every respondent on this subject, and in other posts, is a Verbatim shareholder? My LG GSA-H10N firmware JL12(lock removed) burns a lot. Last year: -50x Ritek R05-01 full printable(12x) -100x Optodisc R16(16x) -100x CMC MAG E01(8x) silver top full printable -100x Benq Daxon AZ3(16x) Total of 6 coasters or partial none-read discs, probably my mistake. Done some things during the burning process. Always burn +DL no Verbatim and no problems with these discs! Also burned some no Verbatim discs three years ago and in excellent condition today, a different burner of course. What I leant is that you should not start/save/edit a program/file during the burn process. Verbatim is OK. Question: What are these replys all about
  12. wishfull

    What does SPLIP stand for?

    KEVDRIVER: With the highest resolution picture plus DTS and Dolby Digital 5.1 sound, Superbit? offers the ultimate in home entertainment. Is this superbit superior to the Blueray video and audio standard? MPEG-video and audio on dvd has a limited bitrate spec as far as I know, and Blueray video and audio specs are way above these.
  13. wishfull

    What does SPLIP stand for?

    Superbit? I've done some searching about this superbit thing, not much info. Is this a HDTV(US) playback standard or what...?
  14. wishfull

    DVD+R Reserve Track?

    LIGHTNING UK: It makes the program send the 'Reserve Track' command all the time when burning DVD+R. Normally it's only needed for DVD-R burning. Q: So, what is a Reserve Track and why do I need this for a + or - R?
  15. wishfull

    formatting problems

    Dear Defenestration - Ifcrule1972 - Blutach and Lightning UK, All your replys's have been a great help to clear the +RW format procedure in coop with IB. Not really. It's a bit different. I'm not what you call a newbie in the dig world, but it is amazing to see how people react on a post, like beeing offended in person and at the same time do not add anything to the discussion/questions. I do understand all the functions in the settings, no university degree required for this. I had the pleasure speaking to Lightning before about burning +DL and the layer break. ImgBurn still Is not burning a +DL as I would like to. Yes I know, the drive burns the disc and not IB, but IB provides the commands for the drive. OK for you Lightning? Since I use ordinary progs and a standard burner DVD-drive(LG), a standard Winxp pro sp2, AMD 939, 2gb mem, sufficient HD mem and some other progs to make contact with others, it is not clear to me why this small prog(IB) acts different as to DVDDec, for +RW yes as Lightning explains. I burn my discs with IB in the same way as I did with DVDDec. Since Lightning has his own doubts, why shouldn't I have some? Yes Lightning, it is possible to burn an ISO on a DVD+DL and a +RW with Nero, no format with a new +RW. Only warning overwrite. Pse, stop this discussion and thank you. I look forward to version 2. Happy burning, ...........
×

Important Information

By using this site, you agree to our Terms of Use.