Hi, just been creating a dvd with DVD Flick that filled the DVD to 98% with a bitrate of something like 2,300 iirc. Everything appeared to be going fine until I get to ImgBurn which isn't allowing me to burn.
I don't know if the following info from the device tab helps;
PIONEER DVD-RW DVR-215D 1.13 (ATA)
Current Profile: DVD+R
Disc Information:
Status: Incomplete
Erasable: No
Sessions: 1
Free Sectors: 2,294,816
Free Space: 4,699,783,168 bytes
Free Time: 509:59:41 (MM:SS:FF)
Supported Write Speeds: 4x, 6x, 8x, 12x, 16x, 18x
Disc Control Blocks Information:
PIONEER DVR-215D
Physical Format Information (ADIP):
Disc ID: MBIPG101-R05-01
Book Type: DVD+R
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0
Physical Format Information (Last Recorded):
Disc ID: MBIPG101-R05-01
Book Type: DVD+R
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0
Performance (Write Speeds):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295103 (0x0023053F)
-> RS: 5,540 KB/s (4x) - WS: 5,540 KB/s (4x)
Descriptor 2...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295103 (0x0023053F)
-> RS: 8,310 KB/s (6x) - WS: 8,310 KB/s (6x)
Descriptor 3...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295103 (0x0023053F)
-> RS: 11,080 KB/s (8x) - WS: 11,080 KB/s (8x)
Descriptor 4...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295103 (0x0023053F)
-> RS: 16,620 KB/s (12x) - WS: 16,620 KB/s (12x)
Descriptor 5...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295103 (0x0023053F)
-> RS: 22,160 KB/s (16x) - WS: 22,160 KB/s (16x)
Descriptor 6...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295103 (0x0023053F)
-> RS: 24,930 KB/s (18x) - WS: 24,930 KB/s (18x)
-----------
So far as I can see, the brand new disc ought to cover the 4,670,652,416 byte size of the image I'm doing (and the 2,280,562 sectors). I've instead chosen to just create an ISO in the mean time, the size of which is 4,561,216 kb - any of this relevant? I'm not aware of any log, by the way - presumably I need a proper error for that to be generated?
Any ideas? Thanks for any help.