Jump to content

errupin

Members
  • Content Count

    13
  • Joined

  • Last visited

About errupin

  • Rank
    ISF Newbie
  1. errupin

    power calibration error closing disc

    Thanks for your help!!
  2. errupin

    power calibration error closing disc

    Thanks for your interest. Here goes the information: LITE-ON DVDRW LH-18A1H HL07 (SCSI) Current Profile: DVD+R DL Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 3.750.640 Size: 7.681.310.720 bytes Time: 833:30:40 (MM:SS:FF) Supported Write Speeds: 2,4x; 4x DVD?R DL Boundary Information: L0 Data Zone Capacity: 1.993.280 Changeable: No TOC Information: Session 1... -> Track 01 (Mode 1, LBA: 0 - 3750639) -> LeadOut (LBA: 3750640) Physical Format Information (ADIP): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 16.580.607 Last Physical Sector in Layer 0: 2.283.519 Physical Format Information (Last Recorded): Disc ID: MKM-001-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 16.344.687 Last Physical Sector in Layer 0: 2.189.887 Layer Information: Layer 0 Sectors: 1.993.280 (53,15%) Layer 1 Sectors: 1.757.360 (46,85%) Do you thing it looks OK? thanks
  3. I got the following log when burning to Verbatim double layer 2.4x. I never had any problem until today. Should I worry about the dvd quality or was the process succesfully completed despite of the warning and error messages? thanks. I 12:17:30 ImgBurn Version 2.3.2.0 started! I 12:17:30 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 12:17:30 Total Physical Memory: 2.096.300 KB - Available: 1.711.128 KB I 12:17:30 Initialising SPTI... I 12:17:30 Searching for SCSI / ATAPI devices... I 12:17:30 Found 1 DVD?RW and 1 DVD?RW/RAM! I 12:17:42 Operation Started! I 12:17:42 Source File: D:\CD y DVD\EL_HOMBRE_SIN_SOMBRA.mds I 12:17:42 Source File Sectors: 3.750.640 (MODE1/2048) I 12:17:42 Source File Size: 7.681.310.720 bytes I 12:17:42 Source File Volume Identifier: EL_HOMBRE_SIN_SOMBRA I 12:17:42 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 12:17:42 Source File Implementation Identifier: ImgBurn I 12:17:42 Source File File System(s): ISO9660; UDF (1.02) I 12:17:42 Destination Device: [4:1:0] LITE-ON DVDRW LH-18A1H HL07 (F:) (SCSI) I 12:17:42 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2,4x; 4x) I 12:17:42 Destination Media Sectors: 4.173.824 I 12:17:42 Write Mode: DVD I 12:17:42 Write Type: DAO I 12:17:42 Write Speed: 2x I 12:17:42 Link Size: Auto I 12:17:42 Test Mode: No I 12:17:42 BURN-Proof: Enabled I 12:17:42 Optimal L0 Data Zone Capacity: 1.993.280 I 12:17:42 Optimal L0 Data Zone Method: Copied From Original Disc I 12:19:08 Filling Buffer... (40 MB) I 12:19:09 Writing LeadIn... I 12:19:12 Writing Image... (LBA: 0 - 3750639) I 12:19:12 Writing Layer 0... (LBA: 0 - 1993279) I 12:39:54 Writing Layer 1... (LBA: 1993280 - 3750639) I 12:58:09 Synchronising Cache... I 12:58:13 Closing Track... W 12:59:22 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Power Calibration Area Error W 13:01:15 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Power Calibration Area Error W 13:02:29 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Power Calibration Area Error E 13:02:30 Close Track Failed! - Reason: Power Calibration Area Error I 13:02:30 Closing Track (Last Attempt!)... I 13:02:31 Finalising Disc... I 13:05:58 Image MD5: d016ff05131259cb6e48ae6d13faf19c I 13:05:58 Operation Successfully Completed! - Duration: 00:48:15 I 13:05:58 Average Write Rate: 3.209 KB/s (2.3x) - Maximum Write Rate: 3.334 KB/s (2.4x)
  4. errupin

    ISO image not valid?

    thanks a lot, so fast!!!
  5. errupin

    ISO image not valid?

    I have an ISO image created with dvddecrypter and when i try to burn it ImgBurn says that the image format (MODE1/2336) is not valid for the verbatim DL media (MODE1/2048) in the Pioneer 111D unit. I have backupped many dvds without any problem following the same procedure but now I get this error. Does anybody know why? Imgburn new version problem? thanks.
  6. errupin

    layer change problem

    Hi! I have backuped some DVD9 ISO images to Verbatim DVD+R DL using Imgburn. Some go fine but others show problems at the layer change (pixelation, stops, freezes, etc.), even if I have used the same procedure, same media, same burner, same standalone dvd player... Can anybody explain why this could be? Thanks in advance and congratulations for the software, it is just great. Regards.
  7. errupin

    video and dvd-rom files image

    Will this option be available in next version? i could not find in the current version. By the way, should not it be switched on by default? thanks and congratulations again for your work.
  8. errupin

    video and dvd-rom files image

    By the way, I tried building the ISO with pcgedit and it works. regards.
  9. errupin

    video and dvd-rom files image

    Hi! DVD-ROM part is 67 MB. I guess you are right since it works if i do not include a couple of files, but as soon as I add the last two files the error message appears. Anyway, how can this happen if all the files where inside the original DVD? I am surprised...
  10. Hi! I have in my hard disc the files of a dvd backup that not only include the files inside VIDEO_TS and AUDIO_TS , but also some more DVD-ROM folders and files. When I try to make an ISO image using the new "build" option, it says that it is imposible to find any place for the layerbreak, but if I use only de video files in VIDEO_TS it finds a good layer break cell. What am I doing wrong? isn't it possible to make an ISO image that contains more files than .vob, .ifo and .bup with a suitable layer break information? thanks for help. Errupin.
  11. errupin

    L0 Data Zone Capacity Miscompare

    Yes, they were dvd video files. The program offered me different options to set the layer break in a dialog box, one was blue and four were grey, so I choose the blue one. Unfortunatelly I do not have the original files since I deleted them. The dvd plays fine and the layer jump goes Ok and smoothly, but I am worried since the dvd may have some wrong zone that i will not notice yet. Thanks for your help.
  12. Hi! This is the first time I use the brand new "build" option of ImgBurn to create an ISO image. When I try to burn the image via the MDS file I got the following log, where it warns about a "L0 Data Zone Capacity Miscompare", even if the process finalilzes succesfully. Should I worry about this error? the dvd+r that I got seems to be correct. Thanks and congratulations for this software. Best regards, Errupin. I 13:02:51 ImgBurn Version 2.0.0.0 started! I 13:02:51 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 13:02:51 Initialising SPTI... I 13:02:51 Searching for SCSI / ATAPI devices... I 13:02:51 Found 2 DVD?RWs! I 13:03:35 Operation Started! I 13:03:35 Source File: D:\DVD\WILLOW\WILLOW.MDS I 13:03:35 Source File Sectors: 3.887.536 (MODE1/2048) I 13:03:35 Source File Size: 7.961.673.728 bytes I 13:03:35 Source File Volume Identifier: WILLOW I 13:03:35 Source File Application Identifier: IMGBURN - THE ULTIMATE IMAGE BURNER! © 2006 LIGHTNING UK! I 13:03:35 Source File Implementation Identifier: ImgBurn I 13:03:35 Source File File System(s): ISO9660; UDF (1,02) I 13:03:35 Destination Device: [0:0:0] PIONEER DVD-RW DVR-111D 1.06 (E:) (ATA) I 13:03:35 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2,4x; 4x; 6x; 8x) I 13:03:35 Destination Media Sectors: 4.173.824 I 13:03:35 Write Mode: DVD I 13:03:35 Write Type: DAO I 13:03:35 Write Speed: 2x I 13:03:35 Link Size: Auto I 13:03:35 Test Mode: No I 13:03:35 BURN-Proof: Enabled I 13:03:35 Optimal L0 Data Zone Capacity: 1.943.775 I 13:03:35 Optimal L0 Data Zone Method: Copied From Original Disc W 13:03:59 L0 Data Zone Capacity Miscompare! W 13:03:59 Wanted: 1943775, Got: 1943776 I 13:04:08 Filling Buffer... I 13:04:09 Writing LeadIn... I 13:04:10 Writing Image... I 13:04:10 Writing Layer 0... (LBA: 0 - 1943774) I 13:24:26 Writing Layer 1... (LBA: 1943775 - 3887535) I 13:44:50 Synchronising Cache... I 13:44:51 Closing Track... I 13:44:52 Finalising Disc... I 13:45:52 Image MD5: cd2fe5e8c7e434520260ecd66b9c7794 I 13:45:52 Operation Successfully Completed! - Duration: 00:42:16 I 13:45:52 Average Write Rate: 3.187 KB/s (2.3x) - Maximum Write Rate: 3.385 KB/s (2.4x)
×

Important Information

By using this site, you agree to our Terms of Use.