how would i check what firmware my burner is? as for the burn log, it doesnt say anthing about a failure or anything, its very odd, as it just seems to stop at 50%. cant get my head around it. but if ya like i can start another burn and when it stops at it usual place i can copy the log of up to then if you like if ya can help me?
cheers mate
Read again what I posted and you'll notice where to get the log from previous burns and also where to get the latest firmware for your burner.
I 19:18:24 Operation Started!
I 19:18:24 Source File: D:\rapidshare\ccclx-halo3.dvd
I 19:18:24 Source File Sectors: 3,825,924 (MODE1/2048)
I 19:18:24 Source File Size: 7,835,492,352 bytes
I 19:18:24 Source File Volume Identifier: XGD2DVD_NTSC
I 19:18:24 Source File Volume Set Identifier: 34672923
I 19:18:24 Source File Implementation Identifier: Sonic Scenarist 3.1
I 19:18:24 Source File File System(s): ISO9660, UDF (1.02)
I 19:18:24 Destination Device: [1:0:0] PIONEER DVD-RW DVR-109 1.58 (E:) (ATA)
I 19:18:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x)
I 19:18:24 Destination Media Sectors: 4,173,824
I 19:18:24 Write Mode: DVD
I 19:18:24 Write Type: DAO
I 19:18:24 Write Speed: 2x
I 19:18:24 Link Size: Auto
I 19:18:24 Lock Volume: Yes
I 19:18:24 Test Mode: No
I 19:18:24 OPC: No
I 19:18:24 BURN-Proof: Enabled
W 19:18:24 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x)
I 19:18:24 Advanced Settings - Optimal Writing Speed: No
I 19:18:24 Optimal L0 Data Zone Capacity: 1,913,760
I 19:18:24 Optimal L0 Data Zone Method: Copied From Original Disc
I 19:18:45 Set L0 Data Zone Capacity Succeeded!
I 19:18:45 Filling Buffer... (20 MB)
I 19:18:46 Writing LeadIn...
I 19:18:47 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)
I 19:18:47 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)
I 19:18:47 Writing Layer 0... (LBA: 0 - 1913759)
I 19:38:51 Writing Layer 1... (LBA: 1913760 - 3825923)
I 19:59:18 Abort Request Acknowledged
I 19:59:19 Synchronising Cache...
W 19:59:21 User opted to skip the 'Close Track/Session/Disc' functions.
E 19:59:21 Failed to Write Image!
I 19:59:22 Exporting Graph Data...
I 19:59:22 Graph Data File: C:\Documents and Settings\Stuart\Application Data\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-109_1.58_MONDAY-APRIL-12-2010_7-18_PM_RICOHJPN-D01-67_2x.ibg
I 19:59:22 Export Successfully Completed!
E 19:59:22 Operation Aborted! - Duration: 00:40:57
I 19:59:22 Average Write Rate: 1,576 KB/s (1.1x) - Maximum Write Rate: 3,411 KB/s (2.5x)
thats the log, i started a burn earlier, and again on the last bit of the log, it stopped at 50% again. so not got a bloody clue. this is the log you were on about i assume? if not tell me what info ya need and where i can get it to post here
**I 19:38:51 Writing Layer 1... (LBA: 1913760 - 3825923)**
its when it get to that part of the log it stops at 50%