aoidxc

Thank you for all your answers LIGHTNING I got a new pack of RITEK-BR2-000 and are working perfectly. That concludes that the problem was the media itself. I know that i'm not using top quality discs but in my country is difficult to find better ones so i have to take the risks. Thanks for your support

I bought another brand of discs "verbatim VERBAT-IMw-000" and burn it perfectly i guess the problem is with that pack of 25 BD-R RIDATA "RITEK-BR2-000" I'm going to return that pack and getting a new one Here's the log of the verbatim burnt I 10:40:44 ImgBurn Version 2.5.7.0 started! I 10:40:44 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 10:40:44 Total Physical Memory: 4.185.144 KB - Available: 2.969.612 KB W 10:40:44 Drive H:\ (FAT32) does not support single files > 4 GB in size. W 10:40:44 Drive I:\ (FAT32) does not support single files > 4 GB in size. I 10:40:44 Initialising SPTI... I 10:40:44 Searching for SCSI / ATAPI devices... I 10:40:45 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (E:) (ATA) I 10:40:45 -> Drive 2 - Info: PIONEER BD-RW BDR-206D 1.06 (D:) (ATA) I 10:40:45 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (J:) (SCSI) I 10:40:45 Found 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 10:41:46 Operation Started! I 10:41:46 Source File: G:\WARRIOR.ISO I 10:41:46 Source File Sectors: 10.713.440 (MODE1/2048) I 10:41:46 Source File Size: 21.941.125.120 bytes I 10:41:46 Source File Volume Identifier: WARRIOR I 10:41:46 Source File Volume Set Identifier: 409D9B4200A3781B I 10:41:46 Source File Application Identifier: ImgBurn v2.5.7.0 I 10:41:46 Source File Implementation Identifier: ImgBurn I 10:41:46 Source File File System(s): UDF (2.50) I 10:41:46 Destination Device: [0:0:0] PIONEER BD-RW BDR-206D 1.06 (D:) (ATA) I 10:41:46 Destination Media Type: BD-R (Disc ID: VERBAT-IMw-000) I 10:41:46 Destination Media Supported Write Speeds: 2x I 10:41:46 Destination Media Sectors: 12.219.392 I 10:41:46 Write Mode: BD I 10:41:46 Write Type: DAO I 10:41:46 Write Speed: 2x I 10:41:46 Hardware Defect Management Active: No I 10:41:46 BD-R Verify Not Required: Yes I 10:41:46 Link Size: Auto I 10:41:46 Lock Volume: Yes I 10:41:46 Test Mode: No I 10:41:46 OPC: No I 10:41:46 BURN-Proof: Enabled I 10:41:46 Write Speed Successfully Set! - Effective: 8.990 KB/s (2x) I 10:41:46 Advanced Settings - Optimal Writing Speed: No I 10:41:47 Filling Buffer... (80 MB) I 10:41:48 Writing LeadIn... I 10:42:00 Writing Session 1 of 1... (1 Track, LBA: 0 - 10713439) I 10:42:00 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 10713439) I 11:23:25 Synchronising Cache... I 11:23:26 Closing Track... I 11:23:27 Finalising Disc... I 11:23:37 Exporting Graph Data... I 11:23:37 Graph Data File: C:\Users\AOIOBSCURE\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-206D_1.06_LUNES-30-DE-ABRIL-DE-2012_10-41_a.m._VERBAT-IMw-000_2x.ibg I 11:23:37 Export Successfully Completed! I 11:23:37 Operation Successfully Completed! - Duration: 00:41:50 I 11:23:37 Average Write Rate: 8.625 KB/s (1.9x) - Maximum Write Rate: 9.278 KB/s (2.1x)

It worked before with same discs burning at 2x. tried burning at 6x with same error.

Hi again I began to have problems trying to burning bluray discs. I'm not sure if it's a writer problem or a bd disc problem. The problem began at the moment i used discs from a new pack. I can't prove it with another disc but seems to be that dvd disc are burning normally. I have no problems reading BD discs. EDIT: I just burn a dvd with no problems at all. Here's the log I 20:41:16 ImgBurn Version 2.5.7.0 started! I 20:41:16 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 20:41:16 Total Physical Memory: 4.185.144 KB - Available: 3.117.756 KB W 20:41:16 Drive H:\ (FAT32) does not support single files > 4 GB in size. W 20:41:16 Drive I:\ (FAT32) does not support single files > 4 GB in size. I 20:41:16 Initialising SPTI... I 20:41:16 Searching for SCSI / ATAPI devices... I 20:41:17 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (E:) (ATA) I 20:41:17 -> Drive 2 - Info: PIONEER BD-RW BDR-206D 1.04 (D:) (ATA) I 20:41:17 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (J:) (SCSI) I 20:41:17 Found 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 20:51:50 Searching for SCSI / ATAPI devices... I 20:51:51 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (E:) (ATA) I 20:51:51 -> Drive 2 - Info: PIONEER BD-RW BDR-206D 1.04 (D:) (ATA) I 20:51:51 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (J:) (SCSI) I 20:51:51 Found 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 20:57:44 Searching for SCSI / ATAPI devices... I 20:57:44 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (E:) (ATA) I 20:57:45 -> Drive 2 - Info: PIONEER BD-RW BDR-206D 1.06 (D:) (ATA) I 20:57:45 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (J:) (SCSI) I 20:57:45 Found 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 20:59:01 Operation Started! I 20:59:01 Source File: G:\WARRIOR.ISO I 20:59:01 Source File Sectors: 10.713.440 (MODE1/2048) I 20:59:01 Source File Size: 21.941.125.120 bytes I 20:59:01 Source File Volume Identifier: WARRIOR I 20:59:01 Source File Volume Set Identifier: 409D9B4200A3781B I 20:59:01 Source File Application Identifier: ImgBurn v2.5.7.0 I 20:59:01 Source File Implementation Identifier: ImgBurn I 20:59:01 Source File File System(s): UDF (2.50) I 20:59:01 Destination Device: [0:0:0] PIONEER BD-RW BDR-206D 1.06 (D:) (ATA) I 20:59:01 Destination Media Type: BD-R (Disc ID: RITEK-BR2-000) I 20:59:01 Destination Media Supported Write Speeds: 2x, 4x, 6x, 8x, 10x I 20:59:01 Destination Media Sectors: 12.219.392 I 20:59:01 Write Mode: BD I 20:59:01 Write Type: DAO I 20:59:01 Write Speed: 2x I 20:59:01 Hardware Defect Management Active: No I 20:59:01 BD-R Verify Not Required: Yes I 20:59:01 Link Size: Auto I 20:59:01 Lock Volume: Yes I 20:59:01 Test Mode: No I 20:59:01 OPC: No I 20:59:01 BURN-Proof: Enabled I 20:59:02 Write Speed Successfully Set! - Effective: 8.990 KB/s (2x) I 20:59:02 Advanced Settings - Optimal Writing Speed: No I 20:59:02 Filling Buffer... (80 MB) I 20:59:03 Writing LeadIn... W 20:59:15 Failed to Write Sectors 832 - 863 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x03) W 20:59:15 Retrying (1 of 20)... W 20:59:15 Retry Failed - Reason: Invalid Address For Write W 20:59:15 Retrying (2 of 20)... W 20:59:15 Retry Failed - Reason: Invalid Address For Write W 20:59:15 Retrying (3 of 20)... W 20:59:15 Retry Failed - Reason: Invalid Address For Write W 20:59:15 Retrying (4 of 20)... W 20:59:15 Retry Failed - Reason: Invalid Address For Write W 20:59:15 Retrying (5 of 20)... W 20:59:15 Retry Failed - Reason: Invalid Address For Write W 20:59:15 Retrying (6 of 20)... W 20:59:15 Retry Failed - Reason: Invalid Address For Write W 20:59:15 Retrying (7 of 20)... W 20:59:15 Retry Failed - Reason: Invalid Address For Write W 20:59:15 Retrying (8 of 20)... W 20:59:15 Retry Failed - Reason: Invalid Address For Write W 20:59:15 Retrying (9 of 20)... W 20:59:15 Retry Failed - Reason: Invalid Address For Write W 20:59:15 Retrying (10 of 20)... W 20:59:15 Retry Failed - Reason: Invalid Address For Write W 20:59:15 Retrying (11 of 20)... W 20:59:15 Retry Failed - Reason: Invalid Address For Write W 20:59:15 Retrying (12 of 20)... W 20:59:16 Retry Failed - Reason: Invalid Address For Write W 20:59:16 Retrying (13 of 20)... W 20:59:16 Retry Failed - Reason: Invalid Address For Write W 20:59:16 Retrying (14 of 20)... W 20:59:16 Retry Failed - Reason: Invalid Address For Write W 20:59:16 Retrying (15 of 20)... W 20:59:16 Retry Failed - Reason: Invalid Address For Write W 20:59:16 Retrying (16 of 20)... W 20:59:16 Retry Failed - Reason: Invalid Address For Write W 20:59:16 Retrying (17 of 20)... W 20:59:16 Retry Failed - Reason: Invalid Address For Write W 20:59:16 Retrying (18 of 20)... W 20:59:16 Retry Failed - Reason: Invalid Address For Write W 20:59:16 Retrying (19 of 20)... W 20:59:16 Retry Failed - Reason: Invalid Address For Write W 20:59:16 Retrying (20 of 20)... W 20:59:16 Retry Failed - Reason: Invalid Address For Write E 20:59:43 Failed to Write Sectors 832 - 863 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x03) E 20:59:43 Next Writable Address: 0 I 20:59:43 Synchronising Cache... W 20:59:46 User opted to skip the 'Close Track/Session/Disc' functions. E 20:59:46 Failed to Write Image! E 20:59:46 Operation Failed! - Duration: 00:00:44 I 20:59:46 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)

Hi.. I was burning an iso of a dvd and i got this error. Seems to burn complete but i haven't got this error before. I burnt other isos before this one same day and i got no errors. What could the problem be? Thank you I 13:15:00 ImgBurn Version 2.5.7.0 started! I 13:15:00 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 13:15:00 Total Physical Memory: 4.185.144 KB - Available: 2.453.080 KB W 13:15:00 Drive H:\ (FAT32) does not support single files > 4 GB in size. W 13:15:00 Drive I:\ (FAT32) does not support single files > 4 GB in size. I 13:15:00 Initialising SPTI... I 13:15:00 Searching for SCSI / ATAPI devices... I 13:15:00 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (E:) (ATA) I 13:15:00 -> Drive 2 - Info: PIONEER BD-RW BDR-206D 1.04 (D:) (ATA) I 13:15:00 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (J:) (SCSI) I 13:15:00 Found 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 13:15:12 Operation Started! I 13:15:12 Source File: G:\QUEMAR\Hell.3.Por.DURAN138.ERISS.iso I 13:15:12 Source File Sectors: 2.289.312 (MODE1/2048) I 13:15:12 Source File Size: 4.688.510.976 bytes I 13:15:12 Source File Volume Identifier: HELLRAISER_3 I 13:15:12 Source File Volume Set Identifier: 3F58952BC0A76AD4 I 13:15:12 Source File Application Identifier: NERO BURNING ROM I 13:15:12 Source File Implementation Identifier: AHEAD Nero I 13:15:12 Source File File System(s): ISO9660, UDF (1.02) I 13:15:12 Destination Device: [0:0:0] PIONEER BD-RW BDR-206D 1.04 (D:) (ATA) I 13:15:12 Destination Media Type: DVD-R (Disc ID: RITEKF1) I 13:15:12 Destination Media Supported Write Speeds: 4x, 6x, 8x, 12x, 16x I 13:15:12 Destination Media Sectors: 2.298.496 I 13:15:12 Write Mode: DVD I 13:15:12 Write Type: DAO I 13:15:12 Write Speed: 4x I 13:15:12 Link Size: Auto I 13:15:12 Lock Volume: Yes I 13:15:12 Test Mode: No I 13:15:12 OPC: No I 13:15:12 BURN-Proof: Enabled I 13:15:13 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x) I 13:15:13 Advanced Settings - Optimal Writing Speed: No I 13:15:13 Filling Buffer... (80 MB) I 13:15:15 Writing LeadIn... I 13:15:43 Writing Session 1 of 1... (1 Track, LBA: 0 - 2289311) I 13:15:43 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2289311) I 13:29:58 Synchronising Cache... W 13:30:09 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x4C) W 13:30:10 Synchronise Cache Failed! - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x4C) W 13:30:10 Retrying (1 of 3)... I 13:30:11 Exporting Graph Data... I 13:30:11 Graph Data File: C:\Users\AOIOBSCURE\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-206D_1.04_JUEVES-26-DE-ABRIL-DE-2012_01-15_p.m._RITEKF1_4x.ibg I 13:30:11 Export Successfully Completed! I 13:30:11 Operation Successfully Completed! - Duration: 00:14:58 I 13:30:11 Average Write Rate: 5.355 KB/s (3.9x) - Maximum Write Rate: 5.723 KB/s (4.1x)

Hello. I want to know if there is a way to know the region (A/B/C) of a BD Video when i press the "CALCULATE" button. Thanks