Jump to content

Ch3vr0n

Members
  • Content Count

    297
  • Joined

  • Last visited

Everything posted by Ch3vr0n

  1. Ch3vr0n

    Find disc MID / backup settings

    looks like ur right. In safemode both drives correctly report the MID as VERBAT-ime-00 Yet for some reason they don't in normal boot mode, even with anydvd completely inactive, and that's the only program i have installed that otherwise interacts with the drives, nero and that crap isn't even on my system bd-r--bh10ls30.log bd-r--bh16ns40.log
  2. Ch3vr0n

    Find disc MID / backup settings

    yup, that bd-re-xl log was with a verbatim bd-r inside the drive, a previous one was with a maxell bd-re sl, i do have a sony bd-re dl i can try but since all types of bd are affected, it might not be the drive itself or the media but something on the firmware level.
  3. Ch3vr0n

    Find disc MID / backup settings

    i'm guessing it's the blanks actually. Normal blanks start at the inner diameter these guys' recording layer doesn't start out to be another centimeter further out yet are still be able to hold 23.5gb
  4. Ch3vr0n

    Find disc MID / backup settings

    here's a log from (non-safe mode) for my BH16NS40. Doesn't show the MID either bd-re-xl.log
  5. Ch3vr0n

    Can I change booktypw with a LG BH16NS40?

    i was just about to ask the same question, but as always i use the search first. Found this exact topic. The LG commands result in that invalid field message, the LITE-ON commands for me give: current setting: unknown (FAILED!) reason: invalid command operation code so i'm probably out of luck?
  6. Ch3vr0n

    Find disc MID / backup settings

    This should be what you need drivescan.log
  7. Ch3vr0n

    Find disc MID / backup settings

    Haven't tried safe mode no, about the controller no idea. Ain't that in the debug log. It does make me think if the speedpatch firmware isn't to blame. I still have the original fw, might flash that one to see if it makes any difference.
  8. Ch3vr0n

    Find disc MID / backup settings

    I'll live with it for now then. I did order a bh16 a while back. I'll install that one and see how that one behaves.
  9. Ch3vr0n

    Find disc MID / backup settings

    here's the only 1 i had time to test. No mid in explore window either, nor on my bh08 (logfile 2) Disktype: see link http://www.amazon.co.uk/Disc-25GB-Single-Jewel-Speed/dp/B000IU3Z2C/ref=sr_1_10?ie=UTF8&qid=1377726902&sr=8-10&keywords=maxell+bd-re don't know if this is a dumb question or not but if it can read the descripters etc & toc, shouldn't it list the mid aswell or is that listed in a seperate part of the non-recordable prefab data? maxell-bdre-singlelayer.log maxell-bdre-singlelayer-2.log
  10. Ch3vr0n

    Cannot Write Medium - Incompatible Format

    If you are really using those, then they're prepacked and fake. That is an official verbatim packaging but verbatim does not use a ritek media code. Return that crap and ask for a refund. The official mid for that type is either mkm-003 or mcc-004
  11. Ch3vr0n

    Find disc MID / backup settings

    The problematic ones are bd-r, i do have a few bd-re's ill see if they work. It's the latest firmware on that and other drives, with 1 minor difference. Speedpatched with mcse. My bd-re's are from a few different brands, I'll see which ones do show the mid if any. I'll post back in the weekend. No time to test till then.
  12. Ch3vr0n

    Find disc MID / backup settings

    Don't think it is the drive because my bh08 doesn't display it either, but ill take your word for it. Is there anything you can do about it. The 2nd link i pmed you did show the mid, or am i just gonna have to live with it?
  13. Ch3vr0n

    Find disc MID / backup settings

    Indeed. I don't know if you had the chance to look at the logs. But the information window still does not give the mid. I saw myself in the log something about "invalid request" perhaps that ill have something to do with it. Can't remember it ever having worked from me
  14. Ch3vr0n

    Find disc MID / backup settings

    Attached with anydvd running but inactive (imgburn.log) Attached with anydvd not running at all (imgburn2.log) imgburn.log imgburn2.log
  15. Ch3vr0n

    Find disc MID / backup settings

    Nope. It's always active for me. During burning aswell. Afaik it can possibly only cause issues with verifying (which i never do anyway). I'll give it a shot when i get back from work in about 5hrs normally. Doubt it will work though.
  16. Ch3vr0n

    Find disc MID / backup settings

    as requested imgburn.log
  17. Ch3vr0n

    Find disc MID / backup settings

    kk that solves 1 thing, now all i need is an answer to the MID part.
  18. If the files that you are burning to both drives reside on the same harddrive that is likely the issue. The data can't be fed fast enough to both drives as the drive continuously has to skip from 1 hdd sector to another for both drives. Solution only burn 1 disc at a time.
  19. Ch3vr0n

    Dutch Translation for ImgBurn v2.5.8.0

    Half baked translation * The field for "close program" (Programma Afsluiten) is too long for the assigned space. Its only partially visible as "Programma Afsl.." * Under info on the burn screen the correct translation into context of "Copy" is not "Kopieer" but "Kopie" * don't know if this is translation error or program error but they key combo for eg log sais "Ctrl + maj + Q", that's french not dutch. Should be "Ctrl + shift + Q". Same for "Ctrl + Mag + L" for log and thats only 2 min's into using the new version. Wouldn't surprise me if there were more errors in it. as i suspected. There's more of em * "Clear System Error" does not translate to "Fout bij herstellen" * "Drive" does not translate to "speler" * "Performer" does not translate to "Inzetter": Attached is the proper translation with others fixed aswell. Will do a complete review this wknd dutch_netherlands.lng
  20. Ch3vr0n

    IMGBURN does not do what it is advertised to do

    Video_TS files don't exist. Video_TS is a FOLDER that contains vob, bup and ifo files. Those files make up the dvd. That works just fine here. Burning such a folder is easy. Select the mode "burn folder / files to disc", drag the video_TS folder in it and hit burn. All done
  21. Ch3vr0n

    Add folders rejected; add items restriction

    Selecting multiple folders for bd is easy. You probably know a bd only needs 2 folders. The bdmv and certificate folder. I just select the root folder that holds them both. Say i have a ripped bd called "mymovie" and the folder that contains the bdmv and certificate folder is thus also called "mymovie" structure looks then as followed. Folder: mymovie Subfolder: bdmv Subfolder: certificate Simply drag the "mymovie" folder into imgburn. It'll detect the bluray structure and will ask you if the "mymovie" folder is the root. Say yes "because it is" imgburn will do the rest.
  22. Ch3vr0n

    ImgBurn v2.5.8.0 Released!

    True, but honestly I'm a bit angry at this too but won't stop using it. The question is, why include that crap in the first place? Cant you atleast swap it arround and set zxpress mode to the non-toolbar and AV crap and advanced to install that stuff?
  23. Ch3vr0n

    Semi Full Format

    I was wondering if there was a possibility of adding a semi full format. As in inbetween format with zeroing sectors and quick format. I'm just curious to if it is absolutely necessairy for a new BD-RE to get zeroed ontop of a full format. Isn't the full format (without spare areas ofc) enough?
  24. Ch3vr0n

    Semi Full Format

    is there a real downside to not zeroing the discs ?
  25. Ch3vr0n

    Next Version Installer

    It doesnt matter what my speed is or how much bandwidth i can use per month. The point is that nobody wants to download stuff they don't want/need. No matter how big/small. And you doubt wrong. 124kb x 10.000= 1.240.000 KB / 1024/1024= 1.24 GB extra bandwidth consumed per month on the allotted monthly traffic assigned to the imgburn site. And that is just for 10.000 download. Multiply that by 10 and your looking at 12.4gb extra. Size does matter. We won't notice much difference no, but the traffic the site uses, and his domain registrar will.
×

Important Information

By using this site, you agree to our Terms of Use.