Jump to content

palman

Members
  • Content Count

    23
  • Joined

  • Last visited

Everything posted by palman

  1. palman

    SPLIP revisited

    how safe is it to go beyond 50 / 50 % I assume as I am given several choices I can choose any of them right? I am aware that the star rating etc, but the BLP I am looking at is 64/36 yikes, I know, just that's a natural break in the dvd It wouldn't be noticed while changing the layers.
  2. palman

    What does SPLIP stand for?

    I know this is an old topic and things have moved on now in dvd land. Its better to have it seamless we all agree. We all agree the head has to move and change to layer 1 So if we set it to seamless, and the dvd doesn't support it, what happens? I assume more and more players support this now. I ask this as I produce dvd for the public use ( on a limited level ) and very very rarely I cannot find a point to place the lbp that when it stops for 1/2 a second it wouldn't matter. and on the same point this current one I have says good, the lowest of the 3 offerings, unfortunately its in the middle of an important scene
  3. hi there i havent had any problems with imgburn for like ages, but today, and i swear my computers know i have a rush job on, i am getting the above error. I first set the the BLP to a 57/43 split on disc where i knew i coudl afford to have it jump to next layer. rather than where is suggest in the middle of a sequence at 50/50 i am always consious of having that slight interruption when customers are viewing it back as it changes layer. first i was getting the power calibration error, even though last week i burned another disc fine. so i transfered the image to another computer then i was gettign the l0 zone capacity which i am lost about as to me there is plenty of space on the disc. so as the job has to be out, i remade the iso with the 50/50 split marked good. now i get the error and at a loss how to cure it. i did look through FAQ's but didnt see anything. as this is the first time i have got this error , now i am wondering if its becasuse i updated from 1.23 to 1.29 firmware which i know you guys go a lot on.
  4. palman

    invalid field in parameter list

    ahh so what yer saying is the power calibration error , had already written a bit to the disc, thereby not making it not a blank. i did consider that, and took it out to look, as normally you can see where its been written, i guess it was so small an area it didnt show up to well. Thankyou again for your input and i know you keep harping on about dvd's but i rarely have problems with the Fortis brand, even on xbox360. I do tend to use a 10 bank duplicator but i still need to make the master, i don't have the usb addon. I have since writing to the forum, had to bin all i did and start from scratch, and i am pleased to say all went well this time. Yes using the same brand disc heh i am sure you have shares in verbatim. Actually they are very good discs and i do have a few here in stock. The problem is the customers just pirate the ruddy dvd's anyway . It is about time to see they dropped down in price too. thx again
  5. palman

    invalid field in parameter list

    it has burned fine but the pause between the layers as it jumps i don't like, i guess there is something simple i missed is choosing the chapter point i actually wanted it to add the BLP too.
  6. palman

    invalid field in parameter list

    hiyah i got so many errors i am not 100% sure this is the log from teh one i posted here but it does say the actual error. ; //****************************************\\ ; ImgBurn Version 2.4.2.0 - Log ; Saturday, 08 November 2008, 10:10:58 ; \\****************************************// ; ; I 10:06:39 ImgBurn Version 2.4.2.0 started! I 10:06:39 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 10:06:39 Total Physical Memory: 2,095,852 KB - Available: 1,752,488 KB I 10:06:39 Initialising SPTI... I 10:06:39 Searching for SCSI / ATAPI devices... I 10:06:39 Found 1 DVD
  7. palman

    invalid field in parameter list

    i just remade the image again, and tried another 3 dvd's power calibration error again so i tried a 4th dvd and now it finally started burning so a power calibration can be a bad media too? a slightly misleading error perhaps ? i dunno but maybe this thread might help others. it hasnt as yet finished, i may well get error when it changes over to burn L1
  8. i apologise if your accusing me of hijacking, seemed pointless having the same error on 2 seperate threads. i cannot as yet supply a log, but when i do i will start a new thread
  9. Could be but not in this instant, as i made the master It someone weddings
  10. i just found this elsewhere, perhaps i was just unlucky to have a bad disc? Power Calibration error solutions Try another brand of DVD-/+R or DVD-/+RW media. This is the most common cause of OPC errors. Update the firmware of your recorder. Check the manufacturer's website for the latest version. Check your power connectors, loose connections do occur. Don't share power with other devices. It needs its own power connector. If the error occurs with an external recorder, Check the USB cable and connections. Try different configurations, such as taking the DVD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master. Clean or have your DVD burner serviced. There are cleaning kits available. Sometimes just a gentle appplication of canned air can remove dust blocking the laser. Replace the DVD burner.
  11. What has changed is i had to repair install windows xp, so wether that somehow messed something up i am not sure. i can burn dvd-r with nero, but this is the first time i wanted to burn a DL since the repair install last week. No hardware has changed, admittedly its a 108 pioneer in that computer, 650w psu , the same blank media i burned many times on. i have bank of 10 112d's that i use to burn many, but i use the 108 to make the master so to speak. I used the search to find OPTIMUM power calibration as this is a new error to me, and only found my thread. Is it possible on the new install somethign didnt get put back right, hence not allowing me to use your new build? indeed if i had not chosen to update from what you say that would have given me the same error. Like i say i don;t use your program much, but it is really useful when building DL discs to get a LBP. All i am doing really is backing up an image left on the computer, i could copy it to this computer and burn it on this writer and previous build to get me out the myer quickly, as as usual sometimes the ,most simplest computer task becomes an all day job. I have to leave this particular project now as i have more demanding work to do, but i do have the latest 1.20 firmware for my writer and as i mentioned before its never been an issue, so logically it must be the repair to xp that messed the writer drivers up somewhere. Any help appreciated, as when i get chance i will need to back to archive the image.
  12. i was merely commenting on that i have never had an issue with your program , until this build. hence me finding the need to look at the FAQ's i never had any errors on the previous build, hence my immediate though of going back to it, but i am aware of the power calibration error as occasionlaly i have had it with other computers and other writers usally with nero as it doesn't like other burning software installed. but thank you for your inputl
  13. yeah i been using imgburn not that often i must admit, but when i do its flawless i updated today to 2,40 as it was newly available and i too got hit with optimum power calibration failed so i returned back to 2.32 and now get hit with power claibration failure when writing the 2nd layer. i have now uninstalled the program, and will read the pink slip
  14. To mess with that answer... I have recently developed a problem where Dvd Decrypter (and Imgburn - tho' I still prefer DD) will write a disk, eject it and THEN throw up the "Incompatible media" error. When Decrypter does it, I eject the disk and swap it to another drive and verify it with IB, the only time one failed to verify is when some "dumbass" (yeah, me!) tried to verify using the wrong image. how do you do this? i wanna know, i want to replicate it. you have special settings? when you burn the dvd's, they do play perfectly well in a set top unit right? you only get the error on a computer right? i have 4 dvd's here with the exact same error, but all 4 play perfectly on a dvd player / tv
  15. palman

    dual burners

    Did i miss it, or can it be possible to burn to two burners simultaneously as nero does? again merely speed up output. I have two burners in my computer
  16. palman

    dual burners

    disc duplicators melt down? Where do you get 'disc duplicators' out of HDD? It's a figure of speech for things going mental keeping up with a task. i have been looking at 7 and 9 dvd duplicators, and i notice some have 160gb hd in them, that how i got from hdd to disk dupes
  17. palman

    dual burners

    pirates? i made the ruddy dvd and even filmed it, all i am trying to do is get the end product out quicker
  18. palman

    dual burners

    disc duplicators melt down?
  19. palman

    adobe encore

    I have yet to try your software but was reommended to it via others. I produced a img file in Encore however i need to produce copies quicker and so hence copy the img file to other computers. I was told your software would do this. my problem is the layer break. i would like to read where it is on the img file. i also would like to know how to convert the sectors into times. I have used the auto layer break on encore which proved to be not a good idea. So i have now told it not to do it auto. But i would like to use IMGBURN to read the img and tell where the break now is and then ultimately burn the img file as is . any help would be appreciated thankyou
  20. palman

    adobe encore

    Will ImgBurn's padding logic (assuming he re-authors the ISO with ImgBurn) also pad layer 0 so that he can split it where he likes, provided that he has enough room for the padded ISO? If so, that might give him what he is looking for... OK am i reading this right, padding is like adding dead space onto layer 0 to get it over 60mins?, this is like a dummy file? as what games use sometimes? I am looking at the new ( not auto ) encore img image now, and also made up vobs ready for imgburn to creae a new iso if needed. Its telling me, that its on a 60 / 40 split at vts4.ifo , so i looked at vob 4 and it seems that as i imported act 2 into the project (i unknowingly) made it the first vobs, so vob4 is actually act one. so it seems i have, by fluke, accident call it what you will, found a solution to my problem. This is my first adventure into DVD+R DL, i did take the knowledge in my gaming hat of using verbatum discs though. thank you once again for all your assistance. The knowlede learned here today, i will find useful as i have another dvd to make this is 126mins long. Again the natural break would be about 40 mins into the recording so if i instead of by accident, actually import the 2nd half of the project first that will go into vobs1 + and thereby record onto layer 0. I woudl however like to know a little more re this padding your talking about. As i can see a time where i would have one timeline and may need to pad out a less than natural break
  21. palman

    adobe encore

    "" There is absolutely no correlation of sectors to time, since video is done on VBR and not constant Q and there are several audio and subpicture tracks muxed in. "" i did record in CBR, i could have squeezed the 2hrs onto a dvdr with VBR. basically if encore had done a good enough job, i wouldnt even be here. what really sux is you pay all that money and expect to have a job done, yet Lightning here seems to do a better job for free. ( donations accepted of course ) I'm sure theres some logic in there somewhere, even if its for lightning to sell his knowledget to Adobe. My comment re time is so i can find the break point from the sectors, just to see how pleasing it is to the eye. under the compromise idea.
  22. palman

    adobe encore

    thank you for this quick answer. I think i have managed to do with encore but have it not set break layer auto. I can see from looking at the burned DL disc its quite close to the end, so i'm guessing around 80mins. However can i use the info given from imgburn ie its layer sizes in sectors to equate that into an actual time? secondly, is it because its pressed? or as it is cleverly done, or just done differently that you dont see a retail movie jump as it changed layers?
  23. palman

    adobe encore

    is it possible / practical to have the layer 0 shorter than layer 1? my problem is 52 mins of act one and 62 mins of act two i am at teh moment just telling encore to cut the dvd with auto layer break off, lets hope it does it correctly this time, or i will have to try your suggestion of vobs. but that would depend on the layer rules. ie layer 1 bigger than layer 0 or do i have to make it backwards, so act 2 is on layer 0 and act 1 is on 1, not quite sure how i would do that though. it wouldn't be so bad is encore did its job and actually cut on a chapter point instead of mid dance routine
×

Important Information

By using this site, you agree to our Terms of Use.