Jump to content

Sizzlechest

Members
  • Content Count

    42
  • Joined

  • Last visited

Everything posted by Sizzlechest

  1. No, no errors. It finds the PTRobot DLLs, but it can't enumerate the robots unless you're running as an administrator.
  2. Sizzlechest

    Does 2.5.7.0 close the tray on exit?

    I'm using IMGBurn with the drives in an actual duplicator, but I didn't enable the SDK. IMGBurn isn't configured to manipulate the robot.
  3. I have been running IMGBurn via the command-line in a 2 year old script that I use to automate the burning of discs. Here's the command I use: MODE WRITE /SRC filename.iso /DEST F: /COPIES 1 /VERIFY YES /SPEED AUTO /TESTMODE NO /DELETEIMAGE NO /EJECT NO /WAITFORMEDIA /START /CLOSE /NOSAVESETTINGS Notice that I do not tell IMGBurn to eject the disc. I eject the disc myself through another command after IMGBurn is complete. (I did this to ensure the script would work if I ever had to switch to another burning program that dodn't support ejecting the tray on completion.) Ever since upgrading to 2.5.7.0, I noticed that sometimes the drive ejects, but then the tray closes soon after. The only thing that has changed recently is IMGBurn. Has the behavior of IMGBurn changed? Does it attempt to close the drive tray when it gets shutdown? This doesn't happen consistently. I suspect there may be a timing issue where perhaps under some conditions, the command to close the tray is happening after the command to open the tray, although I honestly can't see how that could be happening since IMGBurn should be closed by then. I'm assuming the response is that nothing changed in the way discs are handled or how they're verified. But like I mentioned, this is a new bug on an old script.
  4. Sizzlechest

    Does 2.5.7.0 close the tray on exit?

    I have some more information that might be relevant... I found this thread here talking about differences in the bootcode of a Sony Optiarc AD-5260S sold retail vs. the firmware found in a Primera duplicator, which is what I'm using. http://club.myce.com/f86/ad-5260s-bootcode-mismatch-322268/ Someome made a comment that the Primera firmware contained "extended tray eject capabilities." This is the first I've ever heard of it. Does this sound familiar to you?
  5. Sizzlechest

    Does 2.5.7.0 close the tray on exit?

    No, that's expected. This is occuring at the end of the verify when the program closes itself. The drive tray ejects, which isn't being done by IMGBurn, so IMGBurn must have exited at that point. Sometimes, the drive tray then closes. There's nothing out of ordinary in the IMGBurn log.
  6. Is there any way to specify a speed on the command line based on the media type? I need to limit it to 6X for DVDs, but I don't want to burn that slow for CDs.
  7. Oh, I didn't know you could do that. I assume this would be the list of possible options: CD-R CD-RW DVD-R DVD+R DVD-RW DVD+RW I don't need bluray settings, but I assume there would be something applicable. BTW, the readme says: /SPEED <Write Speed> Used to change the value of the 'Write Speed' drop down list. The parameter must match the value within the drop down list exactly. Examples: /SPEED MAX /SPEED 1x /SPEED 2.4x (or 2,4x depending on regional settings) I'd like to ensure I override any settings and force AWS from the command line. Is "/SPEED AWS" or "/SPEED AUTO" the correct way to do it?
  8. Yes, but the AWS settings are based on the disc id, yes? How do I make an entry for all CD disc ids and another for all DVD disc ids? I did read the guide, but I don't see how that could be done. Do I just enter "CD" and "DVD" in place of the disc id?
  9. That would probably work for me since we don't use a lot of different brand discs.
  10. Sizzlechest

    Robot and Media Changer help

    I saw the new options in 2.5.1.0 for robots and media changers, so I thought I'd try it out with my Primera Bravo II Disc Publisher. I enabled the checkboxes in the I/O section, but I got the following errors: I 10:08:08 Initialising BS_Robots... E 10:08:08 Unable to initialise BS_Robots! - BSRobots20.dll E 10:08:08 Reason: The specified module could not be found. I 10:08:09 Initialising SPTI... I 10:08:09 Searching for Auto Loader devices... I 10:08:09 Found 0 Auto Loaders! I 10:08:09 Searching for Medium Changer devices... I 10:08:09 Found 0 Medium Changers! I 10:08:09 Searching for SCSI / ATAPI devices... I 10:08:09 -> Drive 1 - Info: HL-DT-ST CD-ROM GCR-8480B 1.00 (D:) (ATA) I 10:08:09 -> Drive 2 - Info: PIONEER DVD-RW DVR-108 9.18 (E:) (USB) I 10:08:09 Found 1 CD-ROM and 1 DVD±RW! FYI, the Pioneer is the drive in the duplicator. Where do I get the BSRobots20.dll file?
  11. Sizzlechest

    Robot and Media Changer help

    Yes, that will be fine. I'll test it tomorrow morning. Have you sent it yet? I checked my Junk Mail, too.
  12. Sizzlechest

    Robot and Media Changer help

    Yes, that will be fine. I'll test it tomorrow morning.
  13. Sizzlechest

    Robot and Media Changer help

    Sounds good. Whenever you're ready.
  14. Sizzlechest

    Robot and Media Changer help

    I would if I could, but it's on a PC that's not accessible from Internet.
  15. Sizzlechest

    Robot and Media Changer help

    Sure. No problem. I'll be you guinea pig.
  16. Sizzlechest

    Robot and Media Changer help

    Yes. All burning software has access to the Pioneer drive. I can burn discs, open the tray, and close the tray just fine, but the robot doesn't load/unload or print, obviously.
  17. Sizzlechest

    Robot and Media Changer help

    Ah. Thanks anyway. I would have loved to use IMGBurn instead of the crappy software that comes with my duplicator.
×

Important Information

By using this site, you agree to our Terms of Use.