Jump to content

jspraul

Members
  • Posts

    1
  • Joined

  • Last visited

Everything posted by jspraul

  1. According to the following thread, the reason reading from multi-track discs is blocked is as follows: However, this check is implemented incorrectly -- instead of blocking multi-session discs, it blocks all multi-track discs, even when the disc holds only a single session. This design flaw has been in place since v2.5.6, released back in 2012. The fix was also hinted at in the same forum thread: Hardware DVD recorders finalize in a multi-track format even when they are used to record only a single session on a disc (generating a menu that is included even for the one session). Here is another example of the ImgBurn disc info box for this type of disc: PLDS DVD+-RW DH-16ACS JD11 (SATA) Current Profile: DVD-R Disc Information: Status: Complete State of Last Session: Complete Erasable: No Sessions: 1 Sectors: 1,949,584 Size: 3,992,748,032 bytes Time: 433:16:34 (MM:SS:FF) MID: MCC 02RG20 Supported Read Speeds: 2x, 4x, 6x, 8x, 12x, 16x Current Read Speed: 6x TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 1949583) -> LeadOut (LBA: 1949584) Track Information: Session 1... -> Track 01 (LTSA: 0, LTS: 16128, LRA: 767) -> Track 02 (LTSA: 16144, LTS: 224, LRA: 16367) -> Track 03 (LTSA: 16384, LTS: 1933168, LRA: 1949551) -> Track 04 (LTSA: 1949568, LTS: 16, LRA: 1949583) Pre-recorded Information: Manufacturer ID: MCC 02RG20 Recording Management Area Information: FUNAI L61A9030907BOK+- DVD-RW DD-DRA Physical Format Information (Last Recorded): Book Type: DVD-R Part Version: 5 Disc Size: 120 mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,146,191 Last Physical Sector in Layer 0: 0 I have used IsoBuster to read an image from this disc, but ImgBurn fails to open it with the following error dialog: --------------------------- ImgBurn --------------------------- Minutes out of range! --------------------------- OK --------------------------- The .CUE IsoBuster created for the 3,992,748,032-byte binary dvd image file (no extension?) is: FILE "20150301-original" BINARY REM ORIGINAL MEDIA-TYPE: DVD-R REM SESSION 01 ; Not supported by other applications (*) TRACK 01 MODE1/2048 INDEX 01 00:00:00 REM MSF: 00:00:00 = LBA: 0 TRACK 02 MODE1/2048 INDEX 00 03:35:03 REM MSF: 03:35:03 = LBA: 16128 INDEX 01 03:35:19 REM MSF: 03:35:19 = LBA: 16144 TRACK 03 MODE1/2048 INDEX 00 03:38:18 REM MSF: 03:38:18 = LBA: 16368 INDEX 01 03:38:34 REM MSF: 03:38:34 = LBA: 16384 TRACK 04 MODE1/2048 INDEX 00 433:14:02 REM MSF: 433:14:02 = LBA: 1949552 INDEX 01 433:14:18 REM MSF: 433:14:18 = LBA: 1949568 REM (*) SESSION directives are unfortunately not properly supported REM 'out there'. IsoBuster however supports them ! Due to my unfamiliarity with ImgBurn features, a visit to the forums was necessary to find other threads giving the work-around to add the DVD drive root in build mode. The error message currently reads: --------------------------- ImgBurn --------------------------- Sorry, using Read mode to create an image file from a multi-track DVD-R disc is not currently supported. Instead, use Build mode to create a new 'clean' image based on the contents of the disc. --------------------------- OK --------------------------- I propose changing this to act like the helpful auto-volume-label popup, offering to switch modes and add the source: Sorry, using Read mode to create an image file from a multi-track DVD-R disc could cause data loss. Would you like to use Build mode to create an image including only the most recent session?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.