Jump to content

HTNUTS

Members
  • Content Count

    10
  • Joined

  • Last visited

About HTNUTS

  • Rank
    ISF Newbie
  1. Where are you guys buying your blank discs. Any suggestions on where I can buy Verbatims dual layer blanks at a reasonable price? Thanks in advance
  2. I've been making copys of my new discs using Shrink (v3.2) and Imgburn (v2.3). I usually rip to a iso file that I designate to my desktop. From there I drag it into Imgburn set in the 'write' mode. Once I insert a blank disc (Verbatim) and click on little burn icon, it automatically starts the process. I never have a choice of layer break point. As a result, I'm freezing at most of my break points. Any help would be most appreciated. Below is my latest copy that froze up. I 15:41:03 ImgBurn Version 2.2.0.0 started! I 15:41:03 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 15:41:03 Total Physical Memory: 1,047,556 KB - Available: 583,692 KB I 15:41:03 Initialising SPTI... I 15:41:03 Searching for SCSI / ATAPI devices... I 15:41:03 Found 1 DVD-ROM and 1 DVD?RW! I 15:42:04 Operation Started! I 15:42:04 Source File: C:\Documents and Settings\Mark\Desktop\HAPPY_FEET.ISO I 15:42:04 Source File Sectors: 3,226,154 (MODE1/2048) I 15:42:04 Source File Size: 6,607,163,392 bytes I 15:42:04 Source File Volume Identifier: HAPPY_FEET I 15:42:04 Source File Implementation Identifier: DVD Shrink I 15:42:04 Source File File System(s): ISO9660, UDF (1.02) I 15:42:04 Destination Device: [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA) I 15:42:04 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x) I 15:42:04 Destination Media Sectors: 4,173,824 I 15:42:04 Write Mode: DVD I 15:42:04 Write Type: DAO I 15:42:04 Write Speed: 3x I 15:42:04 Link Size: Auto I 15:42:04 Test Mode: No I 15:42:04 BURN-Proof: Enabled W 15:42:09 Optimal L1 Data Zone Start LBA: None Found! (VTS_01) I 15:42:09 Optimal L0 Data Zone Capacity: 1,613,440 I 15:42:09 Optimal L0 Data Zone Method: ECC Block Boundary, VOBU Boundary I 15:42:36 Filling Buffer... (20 MB) I 15:42:37 Writing LeadIn... I 15:42:38 Writing Image... I 15:42:38 Writing Layer 0... (LBA: 0 - 1613439) I 15:58:47 Writing Layer 1... (LBA: 1613440 - 3226153) I 16:15:26 Synchronising Cache... I 16:15:27 Closing Track... I 16:15:48 Finalising Disc... I 16:16:40 Image MD5: 5d80a37329de2b7b2ebafbb18e22c151 I 16:16:41 Operation Successfully Completed! - Duration: 00:34:36 I 16:16:41 Average Write Rate: 3,280 KB/s (2.4x) - Maximum Write Rate: 3,465 KB/s (2.5x) I 16:16:41 Cycling Tray before Verify... I 16:17:07 Device Ready! I 16:17:07 Operation Started! I 16:17:07 Source Device: [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA) I 16:17:07 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x) I 16:17:07 Image File: C:\Documents and Settings\Mark\Desktop\HAPPY_FEET.ISO I 16:17:07 Image File Sectors: 3,226,154 (MODE1/2048) I 16:17:07 Image File Size: 6,607,163,392 bytes I 16:17:07 Image File Volume Identifier: HAPPY_FEET I 16:17:07 Image File Implementation Identifier: DVD Shrink I 16:17:07 Image File File System(s): ISO9660, UDF (1.02) I 16:17:07 Read Speed: 10x W 16:17:07 [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA) - Selected Read Speed: 13,850 KB/s (10x) W 16:17:07 [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA) - Actual Read Speed: 11,080 KB/s (8x) I 16:17:07 Verifying Sectors... (LBA: 0 - 3226153) I 16:34:06 Device MD5: 5d80a37329de2b7b2ebafbb18e22c151 I 16:34:06 Device (Padded) MD5: 963a4de37e7f74d29b325c33379b87e8 I 16:34:06 Image MD5: 5d80a37329de2b7b2ebafbb18e22c151 I 16:34:07 Operation Successfully Completed! - Duration: 00:16:59 I 16:34:07 Average Verify Rate: 6,332 KB/s (4.6x) - Maximum Verify Rate: 9,321 KB/s (6.7x) I 16:35:34 Close Request Acknowledged I 16:35:34 Closing Down... I 16:35:35 Shutting down SPTI... I 16:35:35 ImgBurn closed!
  3. Cornholio7, You were absolutely right. I must have had 2 of Imgburns open. I must of had the forum sitting on my taskbar. Anyhow, I started from scratch with only the one I was using, and low and behold it worked flawlessly. Thanks a million
  4. I went to sysinternals.com, went through the process to find this: Imgburn 1212 Handle\Device\cdrom0 Imgburn 2836 Handle\Devise\cdrom0
  5. wanted a copy of my new 'Open Season' DVD. I couldn't open it in Shrink, so I made an iso in DVDFab. When I tried to open in Imgburn, I received a error message: DeviceIoControl (FSCTL_Lock_Volume) Failed! Device [1:0:0] memorex 16x-DDL-IN 1.A3 (D:) (ATA) Unable to lock volume for exclusive access Reason: Access is Denied I 20:18:39 ImgBurn Version 2.1.0.0 started! I 20:18:39 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 20:18:39 Initialising SPTI... I 20:18:39 Searching for SCSI / ATAPI devices... I 20:18:39 Found 1 DVD?RW! I 20:20:04 Operation Started! I 20:20:04 Source File: C:\Documents and Settings\Mark\Desktop\OPEN_SEASON33.ISO I 20:20:04 Source File Sectors: 3,156,245 (MODE1/2048) I 20:20:04 Source File Size: 6,463,989,760 bytes I 20:20:04 Source File Volume Identifier: OPEN_SEASON I 20:20:04 Source File Implementation Identifier: DVD Shrink I 20:20:04 Source File File System(s): ISO9660, UDF (1.02) I 20:20:04 Destination Device: [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA) I 20:20:04 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x) I 20:20:04 Destination Media Sectors: 4,173,824 I 20:20:04 Write Mode: DVD I 20:20:04 Write Type: DAO I 20:20:04 Write Speed: 2.4x I 20:20:04 Link Size: Auto I 20:20:04 Test Mode: No I 20:20:04 BURN-Proof: Enabled E 20:24:42 Failed to lock volume for exclusive access. E 20:24:42 Reason: Access is denied. E 20:24:42 Operation Aborted! - Duration: 00:04:37 I 20:24:42 Average Write Rate: N/A - Maximum Write Rate: N/A Any thoughts??? Thanks in advance
  6. HTNUTS

    newbie question, Trouble with settings??

    I was hoping you'd come to my rescue UK, Thanks. Changing the mode from build to write brings the file into Imgburn, but everything is basically greyed out so I can't established a location for a layerbreak. The "WRITE" icons on the bottom left are also greyed out. Sorry I forgot to insert a blank DVD. I don't see the calculator to establish layerbreak. Thanks Answered my own question, just hit the "write" icon
  7. HTNUTS

    newbie question, Trouble with settings??

    I was hoping you'd come to my rescue UK, Thanks. Changing the mode from build to write brings the file into Imgburn, but everything is basically greyed out so I can't established a location for a layerbreak. The "WRITE" icons on the bottom left are also greyed out. Sorry I forgot to insert a blank DVD. I don't see the calculator to establish layerbreak. Thanks
  8. HTNUTS

    newbie question, Trouble with settings??

    I was hoping you'd come to my rescue UK, Thanks. Changing the mode from build to write brings the file into Imgburn, but everything is basically greyed out so I can't established a location for a layerbreak. The "WRITE" icons on the bottom left are also greyed out.
  9. I"ve just created an iso file of "The Ant Bully" using DVDshrink/Imgburn. The file locates on my desktop. When I click on the backup icon in Shrink I have it set to "iso image file and burn with Imgburn" as the target backup. I have the target image file as THE_ANT_BULLY.ISO being sent to the desktop. Do I have that setup right? Because when I drag it into Imgburn, I get an error message "cannot add file to image" because file exceeds size limit imposed by the iso9660 file system.
×

Important Information

By using this site, you agree to our Terms of Use.