Jump to content

zack33

Members
  • Posts

    9
  • Joined

  • Last visited

zack33's Achievements

ISF Newbie

ISF Newbie (1/5)

  1. thanks for the big help ppl I'm using snapdive to host pics as i can't get my Print Screen to work right ok I'm using Vobblanker and i've followed the guide here to split the Cell, but again i'm stumped. worse still i can't find my log which was created after i pressed the Process in vobblanker I have Opened my Video-TS folder on HD I now have a new vob files created in New Folder 6 Ok i've put some new screens up as i'm stuck, what do i do, where to i add a cell, or split. do i just split add cell anywhere, is it done just once, and i want the final output to be on a DVD9 not DVD5 (verb +r DL) hopefully were nearly there now
  2. hi thanks for the info ppl I tryed installing Pcgedit, and following this guide, BUT http://www.digital-digest.com/~blutach/dl_..._pgcedit_v2.htm it won't let me burn a iso, of my DVD-R DL (to a DVD+R DL) i dont even get a ONE TIME SETUP option ** Note my holiday DVD has no menu's or chapters. It starts striaght away, and finishes 3 hrs and 40 mins later ** My setup clicking the burn option, gives me this error followed by this option, which does'nt appear in the guide i'm following step-by-step then i get this option and thats it Where's this option gone, I've got imageBurn installed LOL, what a carry on, the Lord (praise be) does'nt want me to burn a DVD+R DL Hope someone can help
  3. Hi all I tryed all day yesterday to look for guides about inserting cells and chapters to no avail. I'm also stuck on what i'm suppose to use build, verify, as they all out put to ISO I tryed Vobblanker today, but is does'nt read the ISO which i made with imgburn on my hard-drive my setup So what i have done is copy the Family holiday from my Verb DVD-R DL to my HD and fired up Vobblanker but this is where i'm stuck.. i don't know what i'm suppose to cell. I just want to put the family movie onto 1 DVD+R DL, so that i can watch it. i'd rather have it on one than 2 dvds. I'm kinda a lil simple when it comes to computers LOL, as i was born wayyyy back in 1974 when everything ran on steam, most ppl worked on farms, and food was delivered by horse and cart, and computers were stuff of Science Fiction LOL
  4. I don't know if there is anything to take out, as its just a family holiday. what would i take out is it a footage somewhere for about a couple of seconds i remove. i'm not familier with that program let alone Imgburn, what would happen if i just burn the ISO to a DVD+R DL the way it is now on my HD, would it work in my home dvd player, as thats getting really complicated. I'm just tempted to wait about 6 months at splash out on a HD DVD burner for my PC and a HD DVD Player, as DVD+R DL burning requires a Phd in I.T. LOL
  5. Sorted TS07. I got a error saying restart windows as it failed, but i could see the bar in the background going up, so afterwards i restarted and Glory be, it said TS07 LOL anyway a new problemo senor's I had burnt a 4hr family holiday onto a Verb -R DL, now when i was creating it back into a ISO in ImgBurn, it said that it could not find a layer break and that i should cry, well its not that bad that i should cry LOL, but Should i burn this ISO onto a new Verb +R DL, or will i get the same problems as before, not working in a home DVD player thanks Do i have to create a layer break manually, or could i just burn straight to DVD+R DL, also, do you you get a pause for a few seconds when u create a manual layer break when watching a movie on the dvd home player. is it hard to create a layer break as it sounds technical lol I 18:16:58 ImgBurn Version 2.1.0.0 started! I 18:16:58 Microsoft Windows XP Professional (5.1, Build 2600) I 18:16:58 Initialising SPTI... I 18:16:58 Searching for SCSI / ATAPI devices... I 18:16:58 Found 1 DVD-ROM, 1 DVD-RW and 1 DVD?RW/RAM! I 18:20:17 Operation Started! I 18:20:17 Building Image Tree... I 18:20:33 Checking Directory Depth... I 18:20:33 Calculating Totals... I 18:20:33 Preparing Image... W 18:20:47 Unable to find any cells that could be used for the layer break! I 18:20:47 Checking Path Length... I 18:20:47 Image Size: 7,727,022,080 bytes I 18:20:47 Image Sectors: 3,772,960 I 18:20:57 Operation Successfully Completed! - Duration: 00:00:39 I 18:20:57 Operation Started! I 18:20:57 Image Contents: 12 Files, 2 Folders I 18:20:57 Image Sectors: 3,772,960 I 18:20:57 Image Size: 7,727,022,080 bytes I 18:20:57 Image Layer Break Position: 1,886,480 I 18:20:57 Image Single Layer Profile: DVD-R/RW (Media Capacity: 2,298,496) I 18:20:57 Image Double Layer Profile: DVD+R DL (Min L0: 0, Max L0: 2,086,912, Media Capacity: 4,173,824) I 18:20:57 Image Volume Identifier: New I 18:20:57 Image Application Identifier: IMGBURN V2.1.0.0 - THE ULTIMATE IMAGE BURNER! I 18:20:57 Image Implementation Identifier: ImgBurn I 18:20:57 Image File System(s): ISO9660, UDF (1.02) I 18:20:57 Destination File: C:\Documents and Settings\zack\Desktop\New Folder\x.iso I 18:20:57 Destination Free Space: 15,869,730,816 bytes (15,497,784 KB) (15,134 MB) (14 GB) I 18:20:57 Destination File System: NTFS I 18:20:57 File Splitting: Auto I 18:20:57 Writing Image... I 18:40:48 Image MD5: 96cfba1d0e949488717bdebb2fc4f54e I 18:40:48 Operation Successfully Completed! - Duration: 00:19:51 I 18:40:48 Average Write Rate: 6,335 KB/s (4.6x) - Maximum Write Rate: 8,781 KB/s (6.3x) zack
  6. is the firmware update done it DOS or XP i just click the flasher then the TS07.. can i skip installing the rest of them (ie 2,3,4 etc) gonna have to take out a morgage if its Verb DVD+R DL all the time LOL thanks
  7. sorry me again LOL, just one more question my drive has the firmware of TS01... should i update before burning DL Drive TSST Comp CD/DVDW SH-S162L Firmware TS01 serial no. SH-S162L Type DVD+R DL, DVD-R DL I was'nt able to find a TS06 update, only TS04, does it offer anything better then TS01 Also how would you do a firmware update when the drive is external (IEE1394) Can i also try a tester DVD+R DL (instead of coasting a expensive Verb) PHILIPS DVD+R DOUBLE LAYER is this brand ok to use for data (not video), and i don't need a layer break for data right.. just video what a carry on ... Roll on HD DVD-R i say LOL
  8. Hi Thanks for the quick prompt should i use bitsetting for data dvds (pics, doc, files) you know a normal data dvd, as the DL -R only work on the drive that it was burnt on. I want to use imgburn Do i need to turn the 7 gigabyte folder into a ISO even though its not a movie (but files) and then use Imgburn to burn it thanks ps Any good step-by steps is using ImBurn.... I'd rather use Imgburn ifs its better at writing Dual Layer +R than Nero
  9. Hi all I'm new to Dual burning, as i had a lot of problems with my Verbatim DVD-R DL my drive external (iee1394) Drive TSST Comp CD/DVDW SH-S162L Firmware TS01 serial no. SH-S162L Type DVD+R DL, DVD-R DL Nero Burning Rom v 7.5.9.0 My problem is that when i put a home wedding movie (videoTS, audioTS)(4hrs)or data onto these DVDs .. the movie works perfectly in the burnt drive, but on a home dvd player, on one it does'nt read the disc at all (alba dvd player) and on the other (toshiba dvd player) it gets about 30 mins into play and its starts skipping Also If i create a Data DVD -Dl... again in works and reads the files ONLY on the external drive it was burnt with, not on any other drive :-( Someone suggests using Verb +R as this does bitsetting (dvd-rom) compatabilty... I have now brought 10 VERBATIM +R DL. Do i use bitsetting just for Movies (dvd-rom) for compaibility with home dvd players What about a Data DVD... do i use bitsetting for that, so that it will play on a laptop/PC dvd drive... I'm be putting pictures movies I have also purchased 10 philips DVD+R DL, as i don't want to make the mistake, as i already lost 5 DVD-R DL before Will bitsetting work, i'd rather sell my 10 DVD+R DL, and stick to single layer if all i get is 10 coasters Can i use Nero... as i read the guides for ImgBurn.. its all looks a bit daunting hope ppl can help
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.