Jump to content

dr_ml422

Members
  • Content Count

    371
  • Joined

  • Last visited

Everything posted by dr_ml422

  1. dr_ml422

    ibq. files don't show up.

    Hi I saved a couple of queues to the .ibq file format, and now that I want to load and/or open them I get a "Invalid or unsupported image file format!" "Reason: 1st Image file part is less than 2048 bytes in size." What's this all about? The saved queue files are in the same folder w/the .mp3's and .cue files. I don't know what's happening. Also tells me files no longer exist or have been renamed. would I like to look in another location for the files. There isn't a other location.
  2. dr_ml422

    ibq. files don't show up.

    Ok. That's what I thought. I became so involved w/the .ibq files that I totally forgot that's all I had to do was give the .cue a given name letting me know what I put together. I think I also burnt some audio files as is w/ImgBurn. I'm almost sure I did some mp3's straight onto a cd-r and to mp3 format. I'll look over the guide again. Lot to cover. Thnx.
  3. dr_ml422

    ibq. files don't show up.

    No not the IBQ file and burning those in order. I mean making a .cue file w/various songs from various artists and saving that for future copies. I now know that I would just have to make the .cue file w/all the songs I want and name it something so I know that's the 1 w/all the different songs/genre etc... Btw I just burned a cd-r of a .cue file and it showed up as a audio file when I opened up the disc in my drive. ImgBurn makes straight up audio files now? I thought closest was wave file.
  4. dr_ml422

    ibq. files don't show up.

    Oh ok. I didn't know this. I thought it was a function to save like a set a files that you could load at will at any time and burn. That way you have all of them in a .ibq in a set order so you won't have to search through the cue files and make another .ibq like the last one. You know, sometimes you want to go back and burn lets say a cd for a friend w/a certain list of songs, so you just go to the .ibq and it'll be there saved. I guess there's a project manager which I've seen/read about that serves that purpose? Or is that a temporary fix to a current burning session as well? Thnx. If the project saves certain files as long as you want to be burned whenever then that's what I've been looking for and have misconstrued the .ibq as affording that option.
  5. dr_ml422

    ibq. files don't show up.

    Hi Lightning. Yes my system shows all files and they even show up in the window that you click open to put them in the Queue. It'll only load 1 queue at a time and erase previous 1 if I add another 1 to be able and burn more files. So if the .mp3's are no longer around then the .cue files made of them are no use for the queue either? It'll only load any saved queues w/the load queue button? Why can't I open up the .ibq file just by selecting it in the queue window? It's a supported file. Also I can't load but 1 saved queue at a time? This can't be as different music files are saved according to their genre. I'm thrown off by this. Ok I read the guides which just say what the setting will do, and no where does it mention being able to load several .ibq files at a time. I threw my whole saved queue folder I have saved in my external drive and it will only load the same 1 and not all saved queues in it. So what's suggested? Burn 1 queued file at a time instead of having all files there ready to burn and put on discs? The purpose of the queue is to be able to load as many files as you want so you can burn them w/out having to go open the window again and insert more files correct? Let me know where I'm wrong here please. Thnx.
  6. dr_ml422

    ibq. files don't show up.

    Ok. I'll try this out mmalves. brb. Well it'll load some .ibq files now and the other one it won't cause the .mp3 files are not there or anywhere on the drive. this can't be changed so that only .cue files can load w/out the .mp3 files? Also it'll load 1 saved queue, but when I go to load another one it'll erase the 1 I loaded previously and replace it w/the new load. Can't I load up as many saved queues as I want to burn w/ImgBurn?
  7. dr_ml422

    Write Mode Miscompare?

    Ok. Thnx.
  8. dr_ml422

    Write Mode Miscompare?

    What's this Miscompare all about? Only does it on my Samsung. Here's the log w/my Pioneer DVR 112d burning same media. Thnx. ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Thursday, 17 September 2009, 11:33:14 ; \\****************************************// ; ; I 11:32:12 ImgBurn Version 2.5.0.0 started! I 11:32:12 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 11:32:12 Total Physical Memory: 2,086,992 KB - Available: 1,643,100 KB I 11:32:12 Initialising SPTI... I 11:32:12 Searching for SCSI / ATAPI devices... I 11:32:12 Found 1 DVD
  9. dr_ml422

    Write Mode Miscompare?

    Thnx Lightning. The Samsung's are very good drives. That's been the only quirk really that I noticed by way of the logs. No problems w/playback on DVDs or CDs. That .cue and Queue is a relief for lack of a better word. After organizing the files you want and saving the Queue. you're set. Btw on the FASTREPLY is the cursor suppose to automatically appear in the reply window? Mine doesn't here. It does in DVF and the other forums.
  10. dr_ml422

    Write Mode Miscompare?

    Okie Doke.
  11. dr_ml422

    Write Mode Miscompare?

    no not that I've heard. funny if I select 32x it goes to 24x and so forth. do you guys recommend going back to previous firmware, or this not too much big deal? what's usual course?
  12. dr_ml422

    Write Mode Miscompare?

    well I dl'd the firmware from Lightning's Firmware site. I have the latest. Can it also be the burner not working well w/certain media? That happens also? If you think it's a firmware issue then do you suggest going back to previous firmware? If so how? Thnx mmalves.
  13. dr_ml422

    Piioneer 112D Burning at 1.2 x?

    Yup. That pos DVD43 which was something ages ago was in there as a filter. I removed it from the list in ImgBurn. I don't mind doing a clean install, but I really didn't feel like it. Thnx. Lightning. I'll just stick to the new usual suspects for my backup/copying endeavors. Any issues I'll just post back.
  14. Here's the log. Hope it helps. I had it set to aotomatic write speed at 12x and it was giving me 1.2x. Using Verbatims DVD+R's 16x. Thnx. ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Thursday, 03 September 2009, 16:06:16 ; \\****************************************// ; ; I 15:30:14 ImgBurn Version 2.5.0.0 started! I 15:30:14 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 15:30:14 Total Physical Memory: 2,086,988 KB - Available: 1,800,060 KB W 15:30:14 DVD43 can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! I 15:30:14 Initialising SPTI... I 15:30:14 Searching for SCSI / ATAPI devices... I 15:30:14 Found 1 DVD
  15. dr_ml422

    Piioneer 112D Burning at 1.2 x?

    Lightning the chipset is IntelĀ® 82915G/GV/910GL/Express Chipset Family. When I click on my burners in device manager it tells me it can't load them, that they may be corrupt or missing (code 39). I burned some discs earlier. Idk what happened. I can't find where to go to find what chipset the drives are connected to? Is there a setting somewhere in device manager other than clicking on the drive's properties?
  16. dr_ml422

    Piioneer 112D Burning at 1.2 x?

    Hi eskro. My drivers are blown out of my burners. I tried uninstalling and then restarting, but I get a message saying that windows can't find/install the drivers for my burners. Where would I go for that? I know about firmware but not drivers. Thnx. I 17:08:12 ImgBurn Version 2.5.0.0 started! I 17:08:12 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 17:08:12 Total Physical Memory: 2,086,988 KB - Available: 1,702,956 KB I 17:08:12 Initialising SPTI... I 17:08:12 Searching for SCSI / ATAPI devices... W 17:08:12 No devices detected!
  17. dr_ml422

    Destination .iso folder in settings

    I got you. It came to fruition when I realised that there isn't going to be a automatic file name option in build mode. What happened was exactly what you suggested in a different way. i just click the folder next to the destination box in the GUI and just write in the same name as the volume label which 99.9% of the time is the file name. Then just click save and the rest is history. It'll put that .iso in the predetermined folder I chose in settings. If I may, is there a very particular reason you haven't included a option to just save the file w/the same name as the volume label? I mean if one wants to change the file name they can do that any time, and it'll more or less be the same amount of effort except at a later date. Granted Imgburn already does mostly everything for us anyway, but I would bet most keep the volume label as the file name most of the time anyway. Thnx. P.S. I figured out the UAC thing, but not 4 individual apps. I still haven't come across that fix for 7 yet. I just turned the whole UAC off. I mean for Pete's sake I'm the only one using my stuff anyway and I'm really not frequenting any so called bad sites to be that concerned about having Administrator Rights for my apps. Also that drop zone is a must, so it was a no brainer for me. Without that drag n drop it would of taken me way longer to convert all these vts folders I have.
  18. Ok so i found out the function on how to set a destination folder for .iso's when creating them w/build mode. it won't stay fixed though. When I delete the file in the source window and drop another vts folder in Drop zone I have to manually hit delte to erase the name of the destination file/folder or else it'll put it in the same folder as b4, and imgburn pops up telling you that a .iso already exists there would yiu like to replace it. So is this destination setting a 1 time thing only? also if I delete the whole destination in the file box and hit build it'll put it inside the folder where the vts files are at. So basically having a destination folder set in tools settings isn't a fixed destination as in read mode. Afaik anyway. if I'm doing something wrong or need to do something else to have the .iso's keep going to the same destination folder in build mode please let me know. Thnx.
  19. dr_ml422

    Imgburn closes sometimes

    I didn't realise new version of Ccleaner deleted the Imgburn files. I will uncheck that option. If Imgburn closes again, I'll have the log files saved. Thnx spinner.
  20. dr_ml422

    Imgburn closes sometimes

    Hi. Imgburn has closed a couple of times while it was open in build mode w/the zone option. Does it automatically close down if you take a lil long to either drag/drop the folder in the zone or write the file name of the .iso you're creating? Does it close down period because of anything in the new version? it never closed during a session. Just when waiting to be used like in case above.
  21. Hi Cynthia i'm glad to hear from you. I'm also very happy that I wasn't the only one that suggested the volume label/file name thingy. It makes a whole lot of sense really. I mean if anyone wanted to change the name of the original file they could do that at any time. Now the other part which is considered dangerous. I'm not completely savvy regarding a lot of things computer related, but you'd have to be a lil off to try n burn a system folder and even think about it being near anything deleted related. Now that I've converted my regular flics to .iso's I'm now having to go back and manually delete the vts folders if I didn't do so after building, or the folder it was in. The old double work.
  22. I haven't seen this yet and if so excuse me. I've used Build mode since the beginning and it'll automatically produce the volume label for you if you haven't done so yourself, but i haven't seen or been able to have imgburn automatically give the .iso created the same file name as the volume label. To my understanding you still have to manually put in a file name yourself. The volume label almost always is the file name so i wanted to know if this is implemented already and somehow configured in tools settings or you leave it like that for some reason? I found how to designate the folder for the .iso's so that's some progress. It would be nice to automatically designate the same folder the files are in also to put the .iso in there. Then you could just go to that folder n delete the vts folder and keep the .iso. I know you said it would be dangerous to have Imgburn automatically delete the vts folder after creating a .iso. Let me know about the auto file name. I could live w/manually deleting the vts folder even though it's a pita. I mean why have it around iof you have a .iso already anyway. imgburn is a image burner so I learned a long hard lesson and will always create .iso's to just throw in the queue and start burning away. Thnx.
  23. dr_ml422

    Imgburn closes sometimes

    Thnx spinner. Everything got erased when I ran Ccleaner. If it happens again I'll post w/e the log says. It'll prolly show w/e at the time it closes. I'm wondering if my oclocking of my cpu has anything to do w/it like a safety function when it gets too hot or something. I multi-task usually while reading and burning.
  24. dr_ml422

    Drag and Drop not working in 2.4.3.0

    Makes sense... thanks... I had my shortcut set to run ImgBurn as admin... turned it off and all is well. i'm frustrated. i can't find how to make that administrator thing go away. idk how to turn it off. can't figure it out. all programs are run as admin in 7. i need the dnd feature for drop zone. i'm using my new build w/7 64 bit. let me know wht's the trick please. there's also no option in the installation of imgburn that i saw to not let it install as admin. thnx. i figured it out as far as turning the uac off completely. i'm not paranoid about security threats. these M$ guys are too exaggerated. i'll take time and learn how to disable for individual apps. if there is a way as apparently as i understand from post above there is. just have big project and drag n drop is a must.
  25. dr_ml422

    same destination folder for creating images

    I got it. I just needed how to set one for a particular project. thnx.
×

Important Information

By using this site, you agree to our Terms of Use.