davo Posted May 19, 2009 Share Posted May 19, 2009 ive been using imgburn with dvd flick and usually works fine but on two accasions it has failed which im fine with but it seems to save the information somewhere and i cant find them. each time it using 10% of my ram with a total of 20%. hoping someone can shed some liight on this subject. thanks for any replies. Link to comment Share on other sites More sharing options...
LOCOENG Posted May 19, 2009 Share Posted May 19, 2009 Imgburn main window/Help/Imgburn Logs Link to comment Share on other sites More sharing options...
mmalves Posted May 19, 2009 Share Posted May 19, 2009 If ImgBurn was called by DVD Flick then the log is saved in the same folder that the project is saved. Link to comment Share on other sites More sharing options...
davo Posted May 19, 2009 Author Share Posted May 19, 2009 thanks for the quick replies. tried looking in the logs and file is empty and have already deleted the dvdfick file, i do this after every burn as it takes up lots of memory. imgburn says i have burnt 0 disks to date, guessing this is because i go through dvd flick without actually using it myself. maybe a dvd flick problem? Link to comment Share on other sites More sharing options...
mmalves Posted May 19, 2009 Share Posted May 19, 2009 Without seeing a log we can't know for sure Check if your burner has the latest firmware (look in ImgBurn's Tools menu). Burn at 8x or 12x for better burns (or at 4x if using a laptop burner). Media quality is also important and from our experience Verbatim and Taiyo Yuden are the best blanks you could use. Link to comment Share on other sites More sharing options...
blutach Posted May 19, 2009 Share Posted May 19, 2009 In the future, do not burn from DVD Flick. Finish with it and output to hard disk. Then open ImgBurn (the one you installed from our website - which will always have the latest version). Burn from there, ensuring that logging is on. Regards Link to comment Share on other sites More sharing options...
Recommended Posts