Jump to content

error burning an ISO (MDS) image on DVD+R DL disc


calinutz

Recommended Posts

While verifying the image, this error appears.... the one who created the image said I MUST burn it with ImGBurn in order to work on my GPS.... anyone knows what to do???

 

 

 

I 20:05:32 ImgBurn Version 2.5.0.0 started!

I 20:05:32 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 20:05:32 Total Physical Memory: 1.048.048 KB - Available: 491.240 KB

W 20:05:32 SPTD can have a detrimental effect on drive performance.

I 20:05:32 Initialising SPTI...

I 20:05:32 Searching for SCSI / ATAPI devices...

I 20:05:32 Found 1 CD-RW, 1 DVD±RW and 1 DVD±RW/RAM!

I 20:06:02 Operation Started!

I 20:06:02 Source Device: [0:0:0] HL-DT-ST DVDRAM GE20LU10 FE06 (I:) (USB)

I 20:06:02 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MKM-001-00) (Speeds: 2,4x; 4x)

I 20:06:02 Image File: D:\buffer\*****.MDS

I 20:06:02 Image File Sectors: 2.734.224 (MODE1/2048)

I 20:06:02 Image File Size: 5.599.690.752 bytes

I 20:06:02 Image File Volume Identifier: ****-******

I 20:06:02 Image File Volume Set Identifier: 49DA844249DA8425

I 20:06:02 Image File Implementation Identifier: ULTRAISO v9.3.3.2685

I 20:06:02 Image File File System(s): ISO9660; Joliet; UDF (1.02)

I 20:06:02 Read Speed (Data/Audio): 1x / 1x

E 20:06:02 Session 1, Track 1 is smaller on the disc than it is in the image file.

E 20:06:02 Disc's Track Sectors: 0 (TOC Sectors: 0)

E 20:06:02 Image File's Track Sectors: 2734224 (TOC Sectors: 2734224)

E 20:06:02 Operation Failed! - Duration: 00:00:00

I 20:06:02 Average Verify Rate: N/A - Maximum Verify Rate: N/A

Edited by calinutz
Link to comment
Share on other sites

Your drive seems to have messed that one up - or at least it didn't initialise the disc properly after cycling the tray before the Verify starts.

 

Put the disc back in again now and see if it can recognise it properly - copy + paste the disc info from the panel on the right when you're in Read mode.

Link to comment
Share on other sites

Last evening, after my post, I managed to burn the image with Nero, but my GPS doesn't recognize the disc....that's why I have to burn with ImgBurn, because i told before the one who made the image said it has to be ImgBurn....

 

this evening I'll post what in the right box, but I recall the drive recognize the disc as DL 8.152 Gb....

 

sorry, I'm not very good at technical issues...:(

Link to comment
Share on other sites

It obviously recognises the disc ok *before* you burn it or ImgBurn wouldn't have been able to go through the entire 'Write' process.

 

The issue only shows up once the disc has been burnt, ejected and reloaded. That's why the 'Cycle tray before verify' option is so important. It catches issues that would normally go unseen.

Link to comment
Share on other sites

I remind you that I was JUST verifying the disk against the image ...

 

in the right box is the following readings:

 

for the external drive

 

HL-DT-ST DVDRAM GE20LU10 FE06 (USB)

Current Profile: DVD+R DL

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 4.173.824

Free Space: 8.547.991.552 bytes

Free Time: 927:32:74 (MM:SS:FF)

 

Physical Format Information (Last Recorded):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196.608

Last Physical Sector of Data Area: 16.580.607

Last Physical Sector in Layer 0: 2.283.519

 

 

 

and for the internal drive I had the same error...

 

 

I 22:56:46 Operation Started!

I 22:56:46 Source Device: [0:1:0] TOSHIBA CD/DVDW SD-R5372 TU56 (G:) (ATA)

I 22:56:46 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MKM-001-00) (Speeds: 2,4x; 4x; 5x)

I 22:56:46 Image File: D:\buffer\Toyota-Lexus Navi DVD 2008-2009v1 DVD 4 East\86271-60W392A.MDS

I 22:56:46 Image File Sectors: 2.734.224 (MODE1/2048)

I 22:56:46 Image File Size: 5.599.690.752 bytes

I 22:56:46 Image File Volume Identifier: 86271-60W392A

I 22:56:46 Image File Volume Set Identifier: 49DA844249DA8425

I 22:56:46 Image File Implementation Identifier: ULTRAISO v9.3.3.2685

I 22:56:46 Image File File System(s): ISO9660; Joliet; UDF (1.02)

I 22:56:46 Read Speed (Data/Audio): 1x / 1x

E 22:56:46 Session 1, Track 1 is smaller on the disc than it is in the image file.

E 22:56:46 Disc's Track Sectors: 0 (TOC Sectors: 0)

E 22:56:46 Image File's Track Sectors: 2734224 (TOC Sectors: 2734224)

E 22:56:46 Operation Failed! - Duration: 00:00:00

I 22:56:46 Average Verify Rate: N/A - Maximum Verify Rate: N/A

 

 

and in the right box:

 

TOSHIBA CD/DVDW SD-R5372 TU56 (ATA)

Current Profile: DVD+R DL

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 4.173.824

Free Space: 8.547.991.552 bytes

Free Time: 927:32:74 (MM:SS:FF)

 

Physical Format Information (ADIP):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196.608

Last Physical Sector of Data Area: 16.580.607

Last Physical Sector in Layer 0: 2.283.519

 

Physical Format Information (Last Recorded):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196.608

Last Physical Sector of Data Area: 16.580.607

Last Physical Sector in Layer 0: 2.283.519

Edited by calinutz
Link to comment
Share on other sites

Sorry, I'm confused.

 

Was the info you provided in your previous post from when you had a new/blank disc in the drive or the disc your drive was supposed to have burnt to?

 

Just burn another one and make sure you enable the Verify option.

 

When it's done, post the complete log (copy + paste from the log window).

Link to comment
Share on other sites

OK, I've done what you said, and here it is:

 

HL-DT-ST DVDRAM GE20LU10 FE06 (USB)

Current Profile: DVD+R DL

 

Disc Information:

Status: Complete

Erasable: No

Sessions: 1

Sectors: 2.734.224

Size: 5.599.690.752 bytes

Time: 607:38:24 (MM:SS:FF)

Supported Write Speeds: 2,4x; 4x

 

DVD±R DL Boundary Information:

L0 Data Zone Capacity: 1.415.696

Changeable: No

 

TOC Information:

Session 1... (LBA: 0)

-> Track 01 (Mode 1, LBA: 0 - 2734223)

-> LeadOut (LBA: 2734224)

 

Disc Control Blocks Information:

HL-DT-ST 0LU10

 

Physical Format Information (Last Recorded):

Disc ID: MKM-001-00

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196.608

Last Physical Sector of Data Area: 16.483.439

Last Physical Sector in Layer 0: 1.612.303

 

Layer Information:

Layer 0 Sectors: 1.415.696 (51,78%)

Layer 1 Sectors: 1.318.528 (48,22%)

 

Performance (Write Speed):

Descriptor 1...

-> B0: 0x02; B1: 0x00; B2: 0x00; B3: 0x00

-> EL: 2734223 (0x0029B88F)

-> RS: 6.853 KB/s (5,1x) - WS: 3.324 KB/s (2,4x)

Descriptor 2...

-> B0: 0x02; B1: 0x00; B2: 0x00; B3: 0x00

-> EL: 2734223 (0x0029B88F)

-> RS: 6.853 KB/s (5,1x) - WS: 5.540 KB/s (4x)

 

 

 

and this is the log:

 

 

 

I 22:17:07 ImgBurn Version 2.5.0.0 started!

I 22:17:07 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 22:17:07 Total Physical Memory: 1.048.048 KB - Available: 496.772 KB

W 22:17:07 SPTD can have a detrimental effect on drive performance.

I 22:17:07 Initialising SPTI...

I 22:17:07 Searching for SCSI / ATAPI devices...

I 22:17:07 Found 1 CD-RW, 1 DVD±RW and 1 DVD±RW/RAM!

I 22:22:49 Operation Started!

I 22:22:49 Source File: D:\buffer\Toyota-Lexus Navi DVD 2008-2009v1 DVD 4 East\86271-60W392A.MDS

I 22:22:49 Source File Sectors: 2.734.224 (MODE1/2048)

I 22:22:49 Source File Size: 5.599.690.752 bytes

I 22:22:49 Source File Volume Identifier: 86271-60W392A

I 22:22:49 Source File Volume Set Identifier: 49DA844249DA8425

I 22:22:49 Source File Implementation Identifier: ULTRAISO v9.3.3.2685

I 22:22:49 Source File File System(s): ISO9660; Joliet; UDF (1.02)

I 22:22:49 Destination Device: [0:0:0] HL-DT-ST DVDRAM GE20LU10 FE06 (I:) (USB)

I 22:22:49 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2,4x; 4x)

I 22:22:49 Destination Media Sectors: 4.173.824

I 22:22:49 Write Mode: DVD

I 22:22:49 Write Type: DAO

I 22:22:49 Write Speed: 2,4x

I 22:22:49 Link Size: Auto

I 22:22:49 Lock Volume: Yes

I 22:22:49 Test Mode: No

I 22:22:49 OPC: Yes

I 22:22:49 BURN-Proof: Enabled

I 22:22:49 Book Type Setting: DVD-ROM

I 22:23:02 User Specified L0 Data Zone Capacity: 1.415.696

W 22:23:02 L0 Data Zone Capacity Miscompare!

W 22:23:02 Wanted: 1415696, Got: 2086912

I 22:23:03 Filling Buffer... (40 MB)

I 22:23:04 Writing LeadIn...

I 22:23:24 Writing Session 1 of 1... (1 Track, LBA: 0 - 2734223)

I 22:23:24 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2734223)

I 22:23:24 Writing Layer 0... (LBA: 0 - 1415695)

I 22:37:55 Writing Layer 1... (LBA: 1415696 - 2734223)

I 22:51:29 Synchronising Cache...

I 22:51:30 Closing Track...

I 22:51:37 Finalising Disc...

I 22:53:32 Exporting Graph Data...

I 22:53:32 Graph Data File: C:\Documents and Settings\calin\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GE20LU10_FE06_26-OCTOMBRIE-2009_22-22_MKM-001-00_2,4x.ibg

I 22:53:32 Export Successfully Completed!

I 22:53:32 Operation Successfully Completed! - Duration: 00:30:43

I 22:53:32 Average Write Rate: 3.245 KB/s (2.3x) - Maximum Write Rate: 3.354 KB/s (2.4x)

I 22:53:32 Cycling Tray before Verify...

W 22:53:40 Waiting for device to become ready...

I 22:54:01 Device Ready!

I 22:54:03 Operation Started!

I 22:54:03 Source Device: [0:0:0] HL-DT-ST DVDRAM GE20LU10 FE06 (I:) (USB)

I 22:54:03 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2,4x; 4x)

I 22:54:03 Image File: D:\buffer\Toyota-Lexus Navi DVD 2008-2009v1 DVD 4 East\86271-60W392A.MDS

I 22:54:03 Image File Sectors: 2.734.224 (MODE1/2048)

I 22:54:03 Image File Size: 5.599.690.752 bytes

I 22:54:03 Image File Volume Identifier: 86271-60W392A

I 22:54:03 Image File Volume Set Identifier: 49DA844249DA8425

I 22:54:03 Image File Implementation Identifier: ULTRAISO v9.3.3.2685

I 22:54:03 Image File File System(s): ISO9660; Joliet; UDF (1.02)

I 22:54:03 Read Speed (Data/Audio): 1x / 1x

I 22:54:03 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2734223)

I 22:54:03 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2734223)

I 22:54:03 Verifying Layer 0... (LBA: 0 - 1415695)

W 22:55:14 Failed to Read Sector 37520 - Reason: Unrecovered Read Error

W 22:55:14 Sector 37520 maps to File: \LOADING.KWI

W 23:10:36 Retrying (1)...

W 23:10:44 Retry Failed - Reason: Unrecovered Read Error

W 23:10:56 Retrying (2)...

W 23:11:04 Retry Failed - Reason: Unrecovered Read Error

W 23:11:07 Failed to Read Sector 37520 - Reason: Unrecovered Read Error

W 23:11:07 Sector 37520 maps to File: \LOADING.KWI

W 23:11:15 Failed to Read Sector 37521 - Reason: Unrecovered Read Error

W 23:11:15 Sector 37521 maps to File: \LOADING.KWI

E 23:11:19 Failed to Read Sector 37521 - Reason: Unrecovered Read Error

E 23:11:19 Sector 37521 maps to File: \LOADING.KWI

E 23:11:20 Failed to Verify Sectors!

I 23:11:20 Exporting Graph Data...

I 23:11:20 Graph Data File: C:\Documents and Settings\calin\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GE20LU10_FE06_26-OCTOMBRIE-2009_22-22_MKM-001-00_2,4x.ibg

I 23:11:20 Export Successfully Completed!

E 23:11:20 Operation Failed! - Duration: 00:17:16

I 23:11:20 Average Verify Rate: 72 KB/s (0.1x) - Maximum Verify Rate: 1.496 KB/s (1.1x)

Link to comment
Share on other sites

That log shows the drive burnt the disc ok (according to the drive itself) and was able to re-initialise it correctly after it was 'cycled' just before the Verify operation started.

 

The Verify operation then picked up on a problem where the drive was unable to read some of the data it just wrote.

 

What you should try now is burning at 4x to see if the drive produces a better quality burn.

 

You might also like to try a cleaning disc in the drive.

 

In case you've got a duff spindle of discs, you should try a couple from a totally different spindle.

Link to comment
Share on other sites

That log shows the drive burnt the disc ok (according to the drive itself) and was able to re-initialise it correctly after it was 'cycled' just before the Verify operation started.

 

The Verify operation then picked up on a problem where the drive was unable to read some of the data it just wrote.

 

What you should try now is burning at 4x to see if the drive produces a better quality burn.

 

You might also like to try a cleaning disc in the drive.

 

In case you've got a duff spindle of discs, you should try a couple from a totally different spindle.

 

OK, I'll try another burn...:(

 

anyway, the disc were buyed in different stores, the drive is brand new and I'm tired :(:(

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.