problem.. Posted October 29, 2009 Share Posted October 29, 2009 Hey, guys. I've just flashed my Xbox 360 and was looking forward to play my first backup-game, i bought the DL-discs like a couple of months ago but their brand less and every time i try to burn them on my benQ ew1621 drive it fails and says like this; Here's the log; I 10:23:04 Operation Started! I 10:23:04 Source File: C:\Downloads\FIFA 09\strange-fifa09.dvd I 10:23:04 Source File Sectors: 3 825 924 (MODE1/2048) I 10:23:04 Source File Size: 7 835 492 352 bytes I 10:23:04 Source File Volume Identifier: XGD2DVD_NTSC I 10:23:04 Source File Volume Set Identifier: 34672923 I 10:23:04 Source File Implementation Identifier: Sonic Scenarist 3.1 I 10:23:04 Source File File System(s): ISO9660; UDF (1.02) I 10:23:04 Destination Device: [0:0:0] BENQ DVD DD EW162I 47O9 (I:) (USB) I 10:23:04 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x) I 10:23:04 Destination Media Sectors: 3 827 520 I 10:23:04 Write Mode: DVD I 10:23:04 Write Type: DAO I 10:23:04 Write Speed: 2,4x I 10:23:04 Link Size: Auto I 10:23:04 Lock Volume: Yes I 10:23:04 Test Mode: No I 10:23:04 OPC: No I 10:23:04 BURN-Proof: Enabled I 10:23:04 Book Type Setting: DVD+R DL I 10:23:04 Advanced Settings - WOPC: Yes I 10:23:04 Optimal L0 Data Zone Capacity: 1 913 760 I 10:23:04 Optimal L0 Data Zone Method: Copied From Original Disc I 10:23:04 Set L0 Data Zone Capacity Succeeded! I 10:23:04 Filling Buffer... (40 MB) I 10:23:05 Writing LeadIn... W 10:23:06 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Is Full W 10:23:06 Retrying (1 of 20)... W 10:23:07 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:07 Retrying (2 of 20)... W 10:23:08 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:08 Retrying (3 of 20)... W 10:23:09 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:09 Retrying (4 of 20)... W 10:23:09 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:09 Retrying (5 of 20)... W 10:23:10 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:10 Retrying (6 of 20)... W 10:23:11 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:11 Retrying (7 of 20)... W 10:23:12 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:12 Retrying (8 of 20)... W 10:23:12 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:12 Retrying (9 of 20)... W 10:23:13 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:13 Retrying (10 of 20)... W 10:23:14 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:14 Retrying (11 of 20)... W 10:23:15 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:15 Retrying (12 of 20)... W 10:23:15 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:15 Retrying (13 of 20)... W 10:23:16 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:16 Retrying (14 of 20)... W 10:23:17 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:17 Retrying (15 of 20)... W 10:23:18 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:18 Retrying (16 of 20)... W 10:23:18 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:18 Retrying (17 of 20)... W 10:23:19 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:19 Retrying (18 of 20)... W 10:23:20 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:20 Retrying (19 of 20)... W 10:23:21 Retry Failed - Reason: Power Calibration Area Is Full W 10:23:21 Retrying (20 of 20)... W 10:23:22 Retry Failed - Reason: Power Calibration Area Is Full E 10:23:30 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Is Full I 10:23:30 Synchronising Cache... W 10:23:33 User opted to skip the 'Close Track/Session/Disc' functions. E 10:23:33 Failed to Write Image! E 10:23:33 Operation Failed! - Duration: 00:00:28 I 10:23:33 Average Write Rate: N/A - Maximum Write Rate: N/A Here's the info; BENQ DVD DD EW162I 47O9 (USB) Current Profile: DVD+R DL Disc Information: Status: Empty Erasable: No Free Sectors: 3 827 520 Free Space: 7 838 760 960 bytes Free Time: 850:35:45 (MM:SS:FF) Supported Write Speeds: 2,4x DVD±R DL Boundary Information: L0 Data Zone Capacity: 1 913 760 Changeable: No Physical Format Information (ADIP): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Physical Format Information (Last Recorded): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 110 368 Performance (Write Speed): Descriptor 1... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 3827519 (0x003A673F) -> RS: 2 176 KB/s (1,6x) - WS: 3 324 KB/s (2,4x) Help? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 29, 2009 Share Posted October 29, 2009 I don't think the old BenQ's support MKM-003-00 discs. Get MKM-001-00 or buy a new drive. Link to comment Share on other sites More sharing options...
problem.. Posted October 29, 2009 Author Share Posted October 29, 2009 I don't think the old BenQ's support MKM-003-00 discs. Get MKM-001-00 or buy a new drive. Yeah, but i've tried it with my TSST-Corp TS-653N too. Same problem there as well, any hints? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 29, 2009 Share Posted October 29, 2009 Nope, not really. Either it works or it doesn't. Clean the Samsung and update its firmware. If it still doesn't work then you have 2 choices: 1. Get MKM-001-00 discs. 2. Get a new drive that supports MKM-003-00. Link to comment Share on other sites More sharing options...
problem.. Posted October 30, 2009 Author Share Posted October 30, 2009 Nope, not really. Either it works or it doesn't. Clean the Samsung and update its firmware. If it still doesn't work then you have 2 choices: 1. Get MKM-001-00 discs. 2. Get a new drive that supports MKM-003-00. Yeah, forgot to tell you that i use Verbatim discs too, do you think that i should buy Samsung SH-223F instead? Link to comment Share on other sites More sharing options...
mmalves Posted October 30, 2009 Share Posted October 30, 2009 It would be better if you could get a Pioneer DVR-216/217/218 or an Optiarc AD-7240S. Link to comment Share on other sites More sharing options...
problem.. Posted October 30, 2009 Author Share Posted October 30, 2009 So today i bought a Samsung SH-S223B and use the Verbatim DL discs too burn, but it still fails and says: "I/O Error Device:[2:1:0] TSSTcorp CDDVDW SH-S223B SB02 (Fibre) Scsi:0x02 Interpretation: Check condition CDB: 2A 00 00 00 00 00 00 00 20 00 Interpretation: Write (10) - Sectors:0-31 Sense Area: 71 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00 00 00 Interpretation: Power Calibration Area Error" And here's the log; I 23:05:34 ImgBurn Version 2.5.0.0 started! I 23:05:34 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 23:05:34 Total Physical Memory: 3 667 532 KB - Available: 2 095 448 KB I 23:05:34 Initialising SPTI... I 23:05:34 Searching for SCSI / ATAPI devices... I 23:05:34 Found 1 DVD±RW/RAM! I 23:06:27 Operation Started! I 23:06:27 Source File: C:\Downloads\FIFA 09\strange-fifa09.dvd I 23:06:27 Source File Sectors: 3 825 924 (MODE1/2048) I 23:06:27 Source File Size: 7 835 492 352 bytes I 23:06:27 Source File Volume Identifier: XGD2DVD_NTSC I 23:06:27 Source File Volume Set Identifier: 34672923 I 23:06:27 Source File Implementation Identifier: Sonic Scenarist 3.1 I 23:06:27 Source File File System(s): ISO9660; UDF (1.02) I 23:06:27 Destination Device: [2:1:0] TSSTcorp CDDVDW SH-S223B SB02 (E:) (Fibre) I 23:06:27 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x; 10x) I 23:06:27 Destination Media Sectors: 3 827 520 I 23:06:27 Write Mode: DVD I 23:06:27 Write Type: DAO I 23:06:27 Write Speed: 2,4x I 23:06:27 Link Size: Auto I 23:06:27 Lock Volume: Yes I 23:06:27 Test Mode: No I 23:06:27 OPC: No I 23:06:27 BURN-Proof: Enabled W 23:06:27 Write Speed Miscompare! - Wanted: 3 324 KB/s (2,4x), Got: 5 540 KB/s (4x) I 23:06:27 Book Type Setting: DVD-ROM I 23:06:27 User Specified L0 Data Zone Capacity: 1 913 760 I 23:06:27 Set L0 Data Zone Capacity Succeeded! I 23:06:28 Filling Buffer... (40 MB) I 23:06:28 Writing LeadIn... W 23:06:29 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error W 23:06:29 Retrying (1 of 20)... W 23:06:29 Retry Failed - Reason: Power Calibration Area Error W 23:06:29 Retrying (2 of 20)... E 23:14:28 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error I 23:14:28 Synchronising Cache... W 23:14:35 User opted to skip the 'Close Track/Session/Disc' functions. E 23:14:35 Failed to Write Image! I've tried to burn with CloneCD to but it just says failed, any suggestions please..? Link to comment Share on other sites More sharing options...
mmalves Posted October 30, 2009 Share Posted October 30, 2009 I 23:06:27 Destination Media Sectors: 3 827 520 That disc was damaged in a previous failed burn, so try with a brand new one using 6x or 8x speed. You might also want to look for the latest drivers for your motherboard's chipset and/or SATA controller (use SIW to find their brand/model if you don't know). Link to comment Share on other sites More sharing options...
problem.. Posted October 31, 2009 Author Share Posted October 31, 2009 I 23:06:27 Destination Media Sectors: 3 827 520 That disc was damaged in a previous failed burn, so try with a brand new one using 6x or 8x speed. You might also want to look for the latest drivers for your motherboard's chipset and/or SATA controller (use SIW to find their brand/model if you don't know). Yeah, thanks. But the problem is that my Xbox 360 only read the speed about 2x-2.4x. Do you know what to do? Link to comment Share on other sites More sharing options...
mmalves Posted October 31, 2009 Share Posted October 31, 2009 The console only cares about the burn quality and the slowest burn speed doesn't always result in the best burn quality, especially on new burners like yours which are tuned for faster burnings. Link to comment Share on other sites More sharing options...
problem.. Posted October 31, 2009 Author Share Posted October 31, 2009 The console only cares about the burn quality and the slowest burn speed doesn't always result in the best burn quality, especially on new burners like yours which are tuned for faster burnings. Okey, now I've tried to burn it at 6x and it burned successfully and when i start the game at my xbox it works and when I've chosen language it just says cannot read disc, may be dirty. And I've verified it as well. Link to comment Share on other sites More sharing options...
mmalves Posted October 31, 2009 Share Posted October 31, 2009 If it verified OK then the disc is good. Can you try that disc on another x360? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 31, 2009 Share Posted October 31, 2009 Do a PIPO scan in DVDInfoPro or a Disc Quality scan in Opti Drive Control so we can see how well the drive burnt the disc. Give 8x a shot too. Did you look at that SIW software to find out which controllers you have on your board? It's not really normal for a drive to show up as 'Fibre'. Link to comment Share on other sites More sharing options...
Recommended Posts