Jump to content

Write speed 6x


scrokk

Recommended Posts

Hello I want to ask you, the speed write is 6x so why it take more than an hour to burn the dvd dl? Is there any problems on the log? (Maybe when it says "Waiting for hard disk activity to reach threshold level.."???)

 

I 11:10:15 ImgBurn Version 2.5.0.0 started!
I 11:10:15 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)
I 11:10:15 Total Physical Memory: 1.048.048 KB  -  Available: 411.408 KB
W 11:10:15 SPTD can have a detrimental effect on drive performance.
I 11:10:15 Initialising SPTI...
I 11:10:15 Searching for SCSI / ATAPI devices...
I 11:10:16 Found 1 DVD±RW and 1 DVD±RW/RAM!
I 11:13:05 Operation Started!
I 11:13:06 Source File: D:\...\fm3.dvd
I 11:13:06 Source File Sectors: 3.827.488 (MODE1/2048)
I 11:13:06 Source File Size: 7.838.695.424 bytes
I 11:13:06 Source File Volume Identifier: DVD_ROM
I 11:13:06 Source File Volume Set Identifier: 356fc000MS UDFBridge
I 11:13:06 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 11:13:06 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 11:13:06 Source File File System(s): ISO9660; UDF (1.50)
I 11:13:06 Destination Device: [0:0:0] HL-DT-ST DVDRAM GP08NU11 JV01 (F:) (USB)
I 11:13:06 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x)
I 11:13:06 Destination Media Sectors: 4.173.824
I 11:13:06 Write Mode: DVD
I 11:13:06 Write Type: DAO
I 11:13:06 Write Speed: 2x
I 11:13:06 Link Size: Auto
I 11:13:06 Lock Volume: Yes
I 11:13:06 Test Mode: No
I 11:13:06 OPC: No
I 11:13:06 BURN-Proof: Enabled
W 11:13:06 Write Speed Miscompare! - Wanted: 2.770 KB/s (2x), Got: 8.310 KB/s (6x)
I 11:13:06 Book Type Setting: DVD-ROM
I 11:13:06 User Specified L0 Data Zone Capacity: 1.913.760
I 11:13:06 Set L0 Data Zone Capacity Succeeded!
I 11:13:15 Filling Buffer... (40 MB)
I 11:13:38 Writing LeadIn...
I 11:14:30 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 11:14:30 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 11:14:30 Writing Layer 0... (LBA: 0 - 1913759)
W 11:43:52 Waiting for buffers to recover... (LBA: 1557440)
W 11:44:18 Waiting for hard disk activity to reach threshold level...
I 11:44:19 Writing Sectors...
W 11:45:02 Waiting for buffers to recover... (LBA: 1612448)
W 11:45:26 Waiting for hard disk activity to reach threshold level...
I 11:45:27 Writing Sectors...
W 11:46:21 Waiting for buffers to recover... (LBA: 1679456)
W 11:46:46 Waiting for hard disk activity to reach threshold level...
I 11:46:47 Writing Sectors...
W 11:47:41 Waiting for buffers to recover... (LBA: 1746752)
W 11:48:03 Waiting for hard disk activity to reach threshold level...
I 11:48:04 Writing Sectors...
W 11:48:55 Waiting for buffers to recover... (LBA: 1810848)
W 11:49:17 Waiting for hard disk activity to reach threshold level...
I 11:49:18 Writing Sectors...
W 11:50:21 Waiting for buffers to recover... (LBA: 1886400)
W 11:50:42 Waiting for hard disk activity to reach threshold level...
I 11:50:42 Writing Sectors...
I 11:51:02 Writing Layer 1... (LBA: 1913760 - 3827487)
W 11:51:42 Waiting for buffers to recover... (LBA: 1958496)
W 11:52:04 Waiting for hard disk activity to reach threshold level...
I 11:52:05 Writing Sectors...
W 11:53:07 Waiting for buffers to recover... (LBA: 2035136)
W 11:53:29 Waiting for hard disk activity to reach threshold level...
I 11:53:30 Writing Sectors...
W 12:05:10 Waiting for buffers to recover... (LBA: 2660288)
W 12:05:34 Waiting for hard disk activity to reach threshold level...
I 12:05:34 Writing Sectors...
I 12:28:00 Synchronising Cache...
I 12:28:02 Closing Track...
I 12:28:12 Finalising Disc...
I 12:29:36 Exporting Graph Data...
I 12:29:36 Export Successfully Completed!
I 12:29:36 Operation Successfully Completed! - Duration: 01:16:30
I 12:29:36 Average Write Rate: 1.736 KB/s (1.3x) - Maximum Write Rate: 3.700 KB/s (2.7x)
I 12:30:48 Close Request Acknowledged
I 12:30:48 Closing Down...
I 12:30:57 Shutting down SPTI...
I 12:30:57 ImgBurn closed!

Link to comment
Share on other sites

You've set the write speed to 2x and, even at that speed, the source drive couldn't deliver data fast enough. Check the fragmentation on your D: drive and avoid using it while burning. Is it an external drive like the burner? You should also Verify your burns.

Link to comment
Share on other sites

You've set the write speed to 2x and, even at that speed, the source drive couldn't deliver data fast enough. Check the fragmentation on your D: drive and avoid using it while burning. Is it an external drive like the burner? You should also Verify your burns.

 

No, D: si not an external drive... but I will defragment it... but about verifying my burns, I read that it is not suitable to do it when burning xbox 360's backups... is that wrong?!

Edited by scrokk
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.