Sizzlechest Posted March 17, 2010 Share Posted March 17, 2010 I saw the new options in 2.5.1.0 for robots and media changers, so I thought I'd try it out with my Primera Bravo II Disc Publisher. I enabled the checkboxes in the I/O section, but I got the following errors: I 10:08:08 Initialising BS_Robots... E 10:08:08 Unable to initialise BS_Robots! - BSRobots20.dll E 10:08:08 Reason: The specified module could not be found. I 10:08:09 Initialising SPTI... I 10:08:09 Searching for Auto Loader devices... I 10:08:09 Found 0 Auto Loaders! I 10:08:09 Searching for Medium Changer devices... I 10:08:09 Found 0 Medium Changers! I 10:08:09 Searching for SCSI / ATAPI devices... I 10:08:09 -> Drive 1 - Info: HL-DT-ST CD-ROM GCR-8480B 1.00 (D:) (ATA) I 10:08:09 -> Drive 2 - Info: PIONEER DVD-RW DVR-108 9.18 (E:) (USB) I 10:08:09 Found 1 CD-ROM and 1 DVD±RW! FYI, the Pioneer is the drive in the duplicator. Where do I get the BSRobots20.dll file? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 17, 2010 Share Posted March 17, 2010 I added support for the Acronova Nimbie units, nothing more, nothing less. That dll is part of the drivers that come with the unit. (afaik anyway) Link to comment Share on other sites More sharing options...
Sizzlechest Posted March 17, 2010 Author Share Posted March 17, 2010 Ah. Thanks anyway. I would have loved to use IMGBurn instead of the crappy software that comes with my duplicator. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 17, 2010 Share Posted March 17, 2010 Can I ask, does ImgBurn have direct access to the drive that's in the robotic unit? If it's just a case of me telling the robot to load/eject a disc, it should be pretty easy to add support for it. Link to comment Share on other sites More sharing options...
Sizzlechest Posted March 17, 2010 Author Share Posted March 17, 2010 Can I ask, does ImgBurn have direct access to the drive that's in the robotic unit? If it's just a case of me telling the robot to load/eject a disc, it should be pretty easy to add support for it. Yes. All burning software has access to the Pioneer drive. I can burn discs, open the tray, and close the tray just fine, but the robot doesn't load/unload or print, obviously. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 17, 2010 Share Posted March 17, 2010 Hmm ok, I'll see if I can get the SDK off them that lets me move the robot around. If you hang around for a while, and assuming you're interested/don't mind, I could use you for the testing - as I don't have such a unit here myself Link to comment Share on other sites More sharing options...
Sizzlechest Posted March 17, 2010 Author Share Posted March 17, 2010 Hmm ok, I'll see if I can get the SDK off them that lets me move the robot around. If you hang around for a while, and assuming you're interested/don't mind, I could use you for the testing - as I don't have such a unit here myself Sure. No problem. I'll be you guinea pig. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 17, 2010 Share Posted March 17, 2010 Cool, I've filled out the form to request the password to their SDK. I don't suppose you've got the unit on a PC that could be accessed via remote desktop / vnc?! I'm thinking it might be nightmare trying to do it semi blind. Acronova sent me a unit when they asked me to do it for their Nimbie product. Link to comment Share on other sites More sharing options...
Sizzlechest Posted March 17, 2010 Author Share Posted March 17, 2010 Cool, I've filled out the form to request the password to their SDK. I don't suppose you've got the unit on a PC that could be accessed via remote desktop / vnc?! I'm thinking it might be nightmare trying to do it semi blind. Acronova sent me a unit when they asked me to do it for their Nimbie product. I would if I could, but it's on a PC that's not accessible from Internet. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 17, 2010 Share Posted March 17, 2010 Ok, it might just take a few more attempts. I have the SDK now and it looks pretty similar to the Acronova one - that should help Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 18, 2010 Share Posted March 18, 2010 This is coming along nicely already, might even have something worth testing in a day or two Link to comment Share on other sites More sharing options...
Sizzlechest Posted March 18, 2010 Author Share Posted March 18, 2010 This is coming along nicely already, might even have something worth testing in a day or two Sounds good. Whenever you're ready. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 18, 2010 Share Posted March 18, 2010 Ok, I think I'm ready for the first test. Should I email you at your forum address? Link to comment Share on other sites More sharing options...
Sizzlechest Posted March 19, 2010 Author Share Posted March 19, 2010 Ok, I think I'm ready for the first test. Should I email you at your forum address? Yes, that will be fine. I'll test it tomorrow morning. Link to comment Share on other sites More sharing options...
Sizzlechest Posted March 19, 2010 Author Share Posted March 19, 2010 Ok, I think I'm ready for the first test. Should I email you at your forum address? Yes, that will be fine. I'll test it tomorrow morning. Have you sent it yet? I checked my Junk Mail, too. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 19, 2010 Share Posted March 19, 2010 Sorry, no. I will be able to in a moment though! Link to comment Share on other sites More sharing options...
Recommended Posts