lex415 Posted April 4, 2010 Share Posted April 4, 2010 Hello all, this is my first post and I thank everyone in advance for reading and hopefully suggesting fixes. I recently read another post Disc Not Empty Pt. 1 and im having similar issues but I think the answer might be different. Im using a DVD+R DL [Memorex] disc to burn an .ISO file that's about 7.5 GBs. I also found this handy forum that helped me a little but not completely. It still reads "Disc Not Empty" and im not sure how to solve this. Any help would be great. LITE-ON DVDRW LH-18A1P GL0C (ATA) Current Profile: DVD+R DL Disc Information: Status: Incomplete State of Last Session: Incomplete Erasable: No Sessions: 1 Supported Write Speeds: 2.4x, 4x, 6x, 8x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2,086,912 Changeable: Yes Physical Format Information (ADIP - L0): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (ADIP - L1): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L0): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L1): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 3,324 KB/s (2.4x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 5,540 KB/s (4x) Descriptor 3... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 8,310 KB/s (6x) Descriptor 4... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 11,080 KB/s (8x) Link to comment Share on other sites More sharing options...
mmalves Posted April 4, 2010 Share Posted April 4, 2010 LITE-ON DVDRW LH-18A1P GL0C (ATA) Update your burner's firmware and try again. Link to comment Share on other sites More sharing options...
lex415 Posted April 8, 2010 Author Share Posted April 8, 2010 LITE-ON DVDRW LH-18A1P GL0C (ATA) Update your burner's firmware and try again. I just updated it still nothing, also I got this: LITE-ON DVDRW LH-18A1P GL0J (ATA) Current Profile: DVD+R DL Disc Information: Status: Incomplete State of Last Session: Incomplete Erasable: No Sessions: 1 Supported Write Speeds: 2.4x, 4x, 6x, 8x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2,086,912 Changeable: Yes Physical Format Information (Last Recorded - L0): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L1): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 3,324 KB/s (2.4x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 5,540 KB/s (4x) Descriptor 3... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 8,310 KB/s (6x) Descriptor 4... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 11,080 KB/s (8x) Whats weird is that before I updated, it started up normally which it has not been doing so far. Unfortunately it said something about calibration failing. Link to comment Share on other sites More sharing options...
Cynthia Posted April 8, 2010 Share Posted April 8, 2010 Tried some other write speeds than the one you used? Supported Write Speeds: 2.4x, 4x, 6x, 8x Link to comment Share on other sites More sharing options...
lex415 Posted April 9, 2010 Author Share Posted April 9, 2010 Tried some other write speeds than the one you used? Supported Write Speeds: 2.4x, 4x, 6x, 8x Im more than sure i've been using 2.4, unless it says different in the log. Link to comment Share on other sites More sharing options...
lex415 Posted April 11, 2010 Author Share Posted April 11, 2010 PLEASE HELP! Link to comment Share on other sites More sharing options...
lex415 Posted April 11, 2010 Author Share Posted April 11, 2010 It just worked randomly. Here's the info, I didn't do anything different. LITE-ON DVDRW LH-18A1P GL0J (ATA) Current Profile: DVD+R DL Disc Information: Status: Complete State of Last Session: Complete Erasable: No Sessions: 1 Sectors: 3,775,584 Size: 7,732,396,032 bytes Time: 839:03:09 (MM:SS:FF) Supported Write Speeds: 2.4x, 4x, 6x, 8x DVD±R DL Boundary Information: L0 Data Zone Capacity: 1,887,792 Changeable: No TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 3775583) -> LeadOut (LBA: 3775584) Disc Control Blocks Information: LITE-ON Physical Format Information (ADIP - L0): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (ADIP - L1): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L0): Disc ID: RITEK-S04-66 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,084,399 Physical Format Information (Last Recorded - L1): Disc ID: RITEK-S04-66 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,084,399 Layer Information: Layer 0 Sectors: 1,887,792 (50%) Layer 1 Sectors: 1,887,792 (50%) Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 3775583 (0x00399C5F) -> RS: 23,052 KB/s (17.1x) - WS: 3,324 KB/s (2.4x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 3775583 (0x00399C5F) -> RS: 23,052 KB/s (17.1x) - WS: 5,540 KB/s (4x) Descriptor 3... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 3775583 (0x00399C5F) -> RS: 23,052 KB/s (17.1x) - WS: 8,310 KB/s (6x) Descriptor 4... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 3775583 (0x00399C5F) -> RS: 23,052 KB/s (17.1x) - WS: 11,080 KB/s (8x) Link to comment Share on other sites More sharing options...
mmalves Posted April 11, 2010 Share Posted April 11, 2010 http://forum.imgburn.com/index.php?showtopic=8000 Link to comment Share on other sites More sharing options...
Cynthia Posted April 11, 2010 Share Posted April 11, 2010 Why not post a log from a burn? Link to comment Share on other sites More sharing options...
lex415 Posted April 14, 2010 Author Share Posted April 14, 2010 Why not post a log from a burn? I thought that was the log after the burn. Oh well. Thans for trying to help! Link to comment Share on other sites More sharing options...
Cynthia Posted April 14, 2010 Share Posted April 14, 2010 The log is in the log window. The one you posted is the disc info. Link to comment Share on other sites More sharing options...
Recommended Posts