Jump to content
Sign in to follow this  
pjwhite

Finalize Disc

Recommended Posts

I backed up a VHS tape on a VHS DVD recorder combo but can not get the menu option on the recorder to finalize the disc. Is there anyway to get this disc finalized with ImgBurn? Below is some information I got with ImgBurn:

hp CDDVDW TS-H653R 0E00 (ATAPI)

Current Profile: DVD+R

 

Disc Information:

Status: Incomplete

State of Last Session: Incomplete

Erasable: No

Sessions: 1

Free Sectors: 1,039,168

Free Space: 2,128,216,064 bytes

Free Time: 230:57:43 (MM:SS:FF)

Next Writable Address: 1255936

 

Track Information:

Session 1...

-> Track 01 (LTSA: 0, LTS: 15872, LRA: 0)

-> Track 02 (LTSA: 15888, LTS: 2279216, LRA: 0)

 

Physical Format Information (ADIP):

Disc ID: CMC MAG-M01-00

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

 

Physical Format Information (Last Recorded):

Disc ID: CMC MAG-M01-00

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

Share this post


Link to post
Share on other sites

Right click the drive drop down box (or Tools menu -> Drive) and select Close -> Track/Session/Disc (in that order).

Share this post


Link to post
Share on other sites

Right click the drive drop down box (or Tools menu -> Drive) and select Close -> Track/Session/Disc (in that order).

 

 

This is what happened when I did that:

Close Track- seem to work because I received no errors

Close Session: I/O Error

Device: [0:1:0] hp CDDVDW TS-H653RE00 (D) (ATAPI)

ScsisStatus: 0x02

Interpretation: Check Condition

CDB: 5B 00 02 00 00 00 00 00 00 00

Interpretation: Close Track/Session

Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 72 03 00 00 00 00

Interpretation: Session Fixation Error- Incomplete Track In Session

 

 

 

Retry Cancel

Share this post


Link to post
Share on other sites

and close disc failed too yeah?

 

 

Yes it did.

 

Is there anyway to get the information from the dvd onto my computer and then using my PC n Nero to make the disc?

Share this post


Link to post
Share on other sites

Can't Explorer see what's on the disc? You could just point ImgBurn's Build mode at the drive with the disc in and have it make a new ISO.

 

If Explorer can't see what's on the disc, try extracting it with something like IsoBuster.

 

I've tweaked the next version of ImgBurn so the Close Track command will work with your disc. At the moment it only attempts to close track number 1... and your 'open' track is track number 2.

Share this post


Link to post
Share on other sites

Can't Explorer see what's on the disc? You could just point ImgBurn's Build mode at the drive with the disc in and have it make a new ISO.

 

If Explorer can't see what's on the disc, try extracting it with something like IsoBuster.

 

I've tweaked the next version of ImgBurn so the Close Track command will work with your disc. At the moment it only attempts to close track number 1... and your 'open' track is track number 2.

 

Explorer does not see whats on the disc.

I downloaded IsoBuster, what do I need to do with it to get the info from the disc and burn it to an DVD on my computer?

 

When will the next version be out so i can try it?

Edited by pjwhite

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.