Max Ader Posted September 6, 2010 Share Posted September 6, 2010 Optiarc AD-7263S FW1.00 AMD SB800 AHCI 1.2.0.164 driver Windows 7 x64 With 2.5.1.0 all work well. Imgburn 2.5.2.0 with disk in drive can't start at all and stall still if insert disk after start. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted September 6, 2010 Share Posted September 6, 2010 I can't see how that's possible, the program isn't drive specific like that. Load 2.5.2.0, switch to the mode that's appropriate (Read or Write), put the disc in and keep an eye on the status bar. When it gets stuck, note what's written in the status bar and tell me. p.s. there's a 1.01 firmware out - http://www.firmwarehq.com/Optiarc/AD-7263S/files.html Link to comment Share on other sites More sharing options...
Max Ader Posted September 6, 2010 Author Share Posted September 6, 2010 (edited) When it gets stuck, note what's written in the status bar and tell me. Ok. When I get home. If I trying to run Imgburn with disk - all freezes on "Searching for SCSI/ATAPI devices...". Without disk its see SATA DVD±RW/RAM drive. there's a 1.01 firmware out I will try it. Edited September 6, 2010 by Max Ader Link to comment Share on other sites More sharing options...
Max Ader Posted September 7, 2010 Author Share Posted September 7, 2010 After flashing new FW, reseting CMOS and etc. it work well. In any case right now. Don't know what influenced Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts