Jump to content

DVD+R DL write failure


zaphod

Recommended Posts

I am running XP SP2 on a Lenovo R61, version 2.5.2 ImgBurn. My DVD device is a Hitachi LG HL-DT_ST GSA-T20N with the WX05 firmware release. (According to Firmware HQ, there is a later release, WY04.) Whenever I try to copy a decrypted DVD movie disc to a DL disc the write proceeds to a certain point and ceases. If I do the same operation to a standard DVD disc it works. Imgburn has no problem reading DL discs. To verify that imgburn could write to a DL drive I tried to copy about 8gb of other data from my hard disk, and Imgburn did so successfully. Here is the output from the log file for a failed write:

; //****************************************\\

; ImgBurn Version 2.5.2.0 - Log

; Monday, 06 September 2010, 16:30:17

; \\****************************************//

;

;

I 14:42:04 ImgBurn Version 2.5.2.0 started!

I 14:42:04 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 14:42:04 Total Physical Memory: 2,087,140 KB - Available: 187,300 KB

W 14:42:04 DVD43 can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

W 14:42:04 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 14:42:05 Initialising SPTI...

I 14:42:05 Searching for SCSI / ATAPI devices...

I 14:42:05 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-T20N WX05 (D:) (ATA)

I 14:42:05 -> Drive 2 - Info: ELBY DVD-ROM 1.0 (I:) (SCSI)

I 14:42:05 -> Drive 3 - Info: SH2078S RRJ452G 2.0B (E:) (SCSI)

I 14:42:05 Found 2 DVD-ROMs and 1 DVD±RW/RAM!

I 15:00:30 Operation Started!

I 15:00:30 Building Image Tree...

I 15:00:30 Checking Directory Depth...

I 15:00:30 Calculating Totals...

I 15:00:30 Preparing Image...

I 15:00:45 Using Layer Break LBA: 1971324 -> 1971328 (VTS_03, LU: 1, PGC: 1, Chapter: 1, Cell: 1, Vob/Cell ID: 1/1, Time: 00:00:00, SPLIP: No)

I 15:00:45 Checking Path Length...

I 15:00:45 Contents: 24 Files, 2 Folders

I 15:00:45 Content Type: DVD Video

I 15:00:45 Data Type: MODE1/2048

I 15:00:45 File System(s): ISO9660, UDF (1.02)

I 15:00:45 Volume Label: NINE_HUNDRED_NIGHTS

I 15:00:45 IFO/BUP 32K Padding: Enabled

I 15:00:45 Region Code: 1

I 15:00:45 TV System: NTSC

I 15:00:45 Size: 7,674,628,096 bytes

I 15:00:45 Sectors: 3,747,377

I 15:00:45 Image Size: 7,675,248,640 bytes

I 15:00:45 Image Sectors: 3,747,680

I 15:00:45 Operation Successfully Completed! - Duration: 00:00:14

I 15:01:37 Operation Started!

I 15:01:37 Building Image Tree...

I 15:01:37 Checking Directory Depth...

I 15:01:37 Calculating Totals...

I 15:01:37 Preparing Image...

I 15:01:40 Using Layer Break LBA: 1971324 -> 1971328 (VTS_03, LU: 1, PGC: 1, Chapter: 1, Cell: 1, Vob/Cell ID: 1/1, Time: 00:00:00, SPLIP: No)

I 15:01:40 Checking Path Length...

I 15:01:40 Contents: 24 Files, 2 Folders

I 15:01:40 Content Type: DVD Video

I 15:01:40 Data Type: MODE1/2048

I 15:01:40 File System(s): ISO9660, UDF (1.02)

I 15:01:40 Volume Label: NINE_HUNDRED_NIGHTS

I 15:01:40 IFO/BUP 32K Padding: Enabled

I 15:01:40 Region Code: 1

I 15:01:40 TV System: NTSC

I 15:01:40 Size: 7,674,628,096 bytes

I 15:01:40 Sectors: 3,747,377

I 15:01:40 Image Size: 7,675,248,640 bytes

I 15:01:40 Image Sectors: 3,747,680

I 15:01:45 Operation Successfully Completed! - Duration: 00:00:08

I 15:01:45 Operation Started!

I 15:01:45 Source File: -==/\/[bUILD IMAGE]\/\==-

I 15:01:45 Source File Sectors: 3,747,680 (MODE1/2048)

I 15:01:45 Source File Size: 7,675,248,640 bytes

I 15:01:45 Source File Volume Identifier: NINE_HUNDRED_NIGHTS

I 15:01:45 Source File Application Identifier: IMGBURN V2.5.2.0 - THE ULTIMATE IMAGE BURNER!

I 15:01:45 Source File Implementation Identifier: ImgBurn

I 15:01:45 Source File File System(s): ISO9660, UDF (1.02)

I 15:01:45 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-T20N WX05 (D:) (ATA)

I 15:01:45 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x)

I 15:01:45 Destination Media Sectors: 4,173,824

I 15:01:45 Write Mode: DVD

I 15:01:45 Write Type: DAO

I 15:01:45 Write Speed: 2.4x

I 15:01:45 Link Size: Auto

I 15:01:45 Lock Volume: Yes

I 15:01:45 Test Mode: No

I 15:01:45 OPC: No

I 15:01:45 BURN-Proof: Enabled

I 15:01:45 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 15:01:45 Book Type Setting: N/A

I 15:01:45 Optimal L0 Data Zone Capacity: 1,971,328

I 15:01:45 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set

I 15:03:02 Set L0 Data Zone Capacity Succeeded!

I 15:03:05 Filling Buffer... (40 MB)

I 15:03:06 Writing LeadIn...

I 15:03:08 Writing Session 1 of 1... (1 Track, LBA: 0 - 3747679)

I 15:03:08 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3747679)

I 15:03:08 Writing Layer 0... (LBA: 0 - 1971327)

W 15:12:18 Failed to Write Sectors 828256 - 828287 - Reason: No Seek Complete

W 15:12:18 Retrying (1 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (2 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (3 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (4 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (5 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (6 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (7 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (8 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (9 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (10 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (11 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (12 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (13 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (14 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (15 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (16 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (17 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (18 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (19 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

W 15:12:18 Retrying (20 of 20)...

W 15:12:18 Retry Failed - Reason: Invalid Address For Write

E 15:12:57 Failed to Write Sectors 828256 - 828287 - Reason: No Seek Complete

E 15:12:57 Next Writable Address: 827712

I 15:12:57 Synchronising Cache...

W 15:12:59 User opted to skip the 'Close Track/Session/Disc' functions.

E 15:12:59 Failed to Write Image!

I 15:12:59 Exporting Graph Data...

I 15:12:59 Graph Data File: C:\Documents and Settings\Bruce\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T20N_WX05_MONDAY-SEPTEMBER-06-2010_3-01_PM_MKM-001-00_2.4x.ibg

I 15:12:59 Export Successfully Completed!

E 15:12:59 Operation Failed! - Duration: 00:11:13

I 15:12:59 Average Write Rate: 2,812 KB/s (2.0x) - Maximum Write Rate: 3,387 KB/s (2.4x)

I 15:20:37 Operation Started!

I 15:20:37 Building Image Tree...

I 15:20:37 Checking Directory Depth...

I 15:20:37 Calculating Totals...

I 15:20:37 Preparing Image...

I 15:20:41 Using Layer Break LBA: 1971324 -> 1971328 (VTS_03, LU: 1, PGC: 1, Chapter: 1, Cell: 1, Vob/Cell ID: 1/1, Time: 00:00:00, SPLIP: No)

I 15:20:41 Checking Path Length...

I 15:20:41 Contents: 24 Files, 2 Folders

I 15:20:41 Content Type: DVD Video

I 15:20:41 Data Type: MODE1/2048

I 15:20:41 File System(s): ISO9660, UDF (1.02)

I 15:20:41 Volume Label: NINE_HUNDRED_NIGHTS

I 15:20:41 IFO/BUP 32K Padding: Enabled

I 15:20:41 Region Code: 1

I 15:20:41 TV System: NTSC

I 15:20:41 Size: 7,674,628,096 bytes

I 15:20:41 Sectors: 3,747,377

I 15:20:41 Image Size: 7,675,248,640 bytes

I 15:20:41 Image Sectors: 3,747,680

I 15:20:41 Operation Successfully Completed! - Duration: 00:00:03

I 15:20:51 Operation Started!

I 15:20:51 Building Image Tree...

I 15:20:51 Checking Directory Depth...

I 15:20:51 Calculating Totals...

I 15:20:51 Preparing Image...

I 15:20:55 Using Layer Break LBA: 1971324 -> 1971328 (VTS_03, LU: 1, PGC: 1, Chapter: 1, Cell: 1, Vob/Cell ID: 1/1, Time: 00:00:00, SPLIP: No)

I 15:20:55 Checking Path Length...

I 15:20:55 Contents: 24 Files, 2 Folders

I 15:20:55 Content Type: DVD Video

I 15:20:55 Data Type: MODE1/2048

I 15:20:55 File System(s): ISO9660, UDF (1.02)

I 15:20:55 Volume Label: NINE_HUNDRED_NIGHTS

I 15:20:55 IFO/BUP 32K Padding: Enabled

I 15:20:55 Region Code: 1

I 15:20:55 TV System: NTSC

I 15:20:55 Size: 7,674,628,096 bytes

I 15:20:55 Sectors: 3,747,377

I 15:20:55 Image Size: 7,675,248,640 bytes

I 15:20:55 Image Sectors: 3,747,680

I 15:20:58 Operation Successfully Completed! - Duration: 00:00:07

I 15:20:58 Operation Started!

I 15:20:58 Source File: -==/\/[bUILD IMAGE]\/\==-

I 15:20:58 Source File Sectors: 3,747,680 (MODE1/2048)

I 15:20:58 Source File Size: 7,675,248,640 bytes

I 15:20:58 Source File Volume Identifier: NINE_HUNDRED_NIGHTS

I 15:20:58 Source File Application Identifier: IMGBURN V2.5.2.0 - THE ULTIMATE IMAGE BURNER!

I 15:20:58 Source File Implementation Identifier: ImgBurn

I 15:20:58 Source File File System(s): ISO9660, UDF (1.02)

I 15:20:58 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-T20N WX05 (D:) (ATA)

I 15:20:58 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x)

I 15:20:58 Destination Media Sectors: 4,173,824

I 15:20:58 Write Mode: DVD

I 15:20:58 Write Type: DAO

I 15:20:58 Write Speed: 1x

I 15:20:58 Link Size: Auto

I 15:20:58 Lock Volume: Yes

I 15:20:58 Test Mode: No

I 15:20:58 OPC: No

I 15:20:58 BURN-Proof: Enabled

W 15:20:58 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 5,540 KB/s (4x)

W 15:20:58 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 5,540 KB/s (4x)

W 15:20:58 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 5,540 KB/s (4x)

W 15:20:58 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 5,540 KB/s (4x)

W 15:20:58 Write Speed Miscompare! - Wanted: 1,385 KB/s (1x), Got: 3,324 KB/s (2.4x) / 5,540 KB/s (4x)

I 15:20:58 Book Type Setting: N/A

I 15:20:58 Optimal L0 Data Zone Capacity: 1,971,328

I 15:20:58 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set

I 15:23:26 Set L0 Data Zone Capacity Succeeded!

I 15:23:26 Filling Buffer... (40 MB)

I 15:23:26 Writing LeadIn...

I 15:23:32 Writing Session 1 of 1... (1 Track, LBA: 0 - 3747679)

I 15:23:32 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3747679)

I 15:23:32 Writing Layer 0... (LBA: 0 - 1971327)

W 15:31:59 Failed to Write Sectors 758560 - 758591 - Reason: No Seek Complete

W 15:31:59 Retrying (1 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (2 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (3 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (4 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (5 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (6 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (7 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (8 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (9 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (10 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (11 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (12 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (13 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (14 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (15 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (16 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (17 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (18 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (19 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

W 15:31:59 Retrying (20 of 20)...

W 15:31:59 Retry Failed - Reason: Invalid Address For Write

E 16:28:51 Failed to Write Sectors 758560 - 758591 - Reason: No Seek Complete

E 16:28:51 Next Writable Address: 758016

I 16:28:51 Synchronising Cache...

W 16:28:55 User opted to skip the 'Close Track/Session/Disc' functions.

E 16:28:55 Failed to Write Image!

I 16:28:55 Exporting Graph Data...

I 16:28:55 Graph Data File: C:\Documents and Settings\Bruce\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T20N_WX05_MONDAY-SEPTEMBER-06-2010_3-20_PM_MKM-001-00_1x.ibg

I 16:28:55 Export Successfully Completed!

E 16:28:55 Operation Failed! - Duration: 01:07:56

I 16:28:55 Average Write Rate: 387 KB/s (0.3x) - Maximum Write Rate: 3,387 KB/s (2.4x)

I 16:30:17 Close Request Acknowledged

I 16:30:17 Closing Down...

I 16:30:17 Shutting down SPTI...

I 16:30:17 ImgBurn closed!

;

;

Link to comment
Share on other sites

This isn't a bug, your drive is just erroring out with 'No Seek Complete' error. ImgBurn has no control over if a disc can be read or written, it's a hardware thing.

 

Try cleaning the drive with a cleaning disc.

 

I disagree. The very same disc which fails during copy (And it isn't just a specific disk, I've tried this with several.) I can view with VLC. Only when I try copying the DVD disc to a blank DL DVD (Verbatim) does this occur - and only with DL DVDs, single layer discs work fine. I have no problem copying approximately 8gb of data from my hard drive to the same brand blank discs. If my drive can read and write DL DVDs in all cases save for one, how can it be a "hardware thing"?

Link to comment
Share on other sites

Disagree all you want, I'm probably in a better position to say what's a hardware problem and what isn't, aren't I?

 

The drive doesn't care what it burns, data is data. There's only one routine in ImgBurn that burns and everything runs through it.

 

If a drive reports an error like that during the burn then it's purely caused by an issue between your drive/firmware/media combo.

 

All slimline drives are rubbish, I wouldn't take it personally.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.