Jump to content

Unable to close session


topolinik

Recommended Posts

Hi, I want to close an open session on a CD, since I'm actually unable to read the last data track as is. The disc is burned as follows: several audio tracks + data track (which is open).

Now, I tried several times ImgBurn with "Close session", "Close disc", "Close track" but nothing changed.

Am I doing wrong?

 

TSSTcorp CDDVDW TS-L633A AC00 (ATA)

Current Profile: CD-R

 

Disc Information:

Status: Incomplete

State of Last Session: Incomplete

Erasable: No

Sessions: 2

Sectors: 216.691

Size: 443.783.168 bytes

Time: 48:11:16 (MM:SS:FF)

Free Sectors: 6.469

Free Space: 13.248.512 bytes

Free Time: 01:28:19 (MM:SS:FF)

Next Writable Address: 353377

 

TOC Information:

Session 1... (LBA: 0 / 00:02:00)

-> Track 01 (Audio, 06:47:53, LBA: 0 / 00:02:00)

-> Track 02 (Audio, 04:19:70, LBA: 30578 / 06:49:53)

-> Track 03 (Audio, 04:47:18, LBA: 50073 / 11:09:48)

-> Track 04 (Audio, 04:32:54, LBA: 71616 / 15:56:66)

-> Track 05 (Audio, 03:10:48, LBA: 92070 / 20:29:45)

-> Track 06 (Audio, 03:50:05, LBA: 106368 / 23:40:18)

-> Track 07 (Audio, 06:15:74, LBA: 123623 / 27:30:23)

-> Track 08 (Audio, 04:25:01, LBA: 151822 / 33:46:22)

-> Track 09 (Audio, 09:59:68, LBA: 171698 / 38:11:23)

-> LeadOut (LBA: 216691 / 48:11:16)

 

Track Information:

Session 1...

-> Track 01 (LTSA: 0, LTS: 30576, LRA: 0)

-> Track 02 (LTSA: 30578, LTS: 19493, LRA: 0)

-> Track 03 (LTSA: 50073, LTS: 21541, LRA: 0)

-> Track 04 (LTSA: 71616, LTS: 20452, LRA: 0)

-> Track 05 (LTSA: 92070, LTS: 14296, LRA: 0)

-> Track 06 (LTSA: 106368, LTS: 17253, LRA: 0)

-> Track 07 (LTSA: 123623, LTS: 28197, LRA: 0)

-> Track 08 (LTSA: 151822, LTS: 19874, LRA: 0)

-> Track 09 (LTSA: 171698, LTS: 44991, LRA: 0)

 

ATIP Information:

Disc ID: 97m34s23f

Manufacturer: Mitsubishi Chemical Corp.

Start Time of LeadIn: 97m34s23f

Last Possible Start Time of LeadOut: 79m59s73f

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.