Jump to content
Sign in to follow this  
nikkolazo

Power Calibration Area Error on BLU-RAY burn

Recommended Posts

Hi guys! I have this problem and I lost 6 blu-ray discs so far. I don't know what happened. First of all I already burn succesfully some blu-ray disc before, (the same ones), but now I can't.

 

The first error that I get was that Imgburn can't finalize the disc, the burning process was ok, about 10-15 min at 4x but when Imgburn try to finalize the disc, I get an error, something about incompatible format.

 

But now, I get another error, and the process can't even start.

 

I attach the log of the las error, and now I lost 3 blu-ray disc with this.

 

I 12:53:57 ImgBurn Version 2.5.5.0 started!
I 12:53:57 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)
I 12:53:57 Total Physical Memory: 6.289.592 KB  -  Available: 4.262.632 KB
I 12:53:57 Initialising SPTI...
I 12:53:57 Searching for SCSI / ATAPI devices...
I 12:53:57 -> Drive 1 - Info: HL-DT-ST BD-RE  WH10LS30 1.00 (H:) (ATA)
I 12:53:57 Found 1 BD-RE!
I 12:54:09 Operation Started!
I 12:54:09 Building Image Tree...
I 12:54:11 Corrected file system selection for Blu-ray Video disc.
I 12:54:11 Corrected UDF revision selection for Blu-ray Video disc.
I 12:54:11 Calculating Totals...
I 12:54:11 Preparing Image...
I 12:54:11 Contents: 92 Files, 16 Folders
I 12:54:11 Content Type: BD Video
I 12:54:11 Data Type: MODE1/2048
I 12:54:11 File System(s): UDF (2.50)
I 12:54:11 Volume Label: [Not Configured]
I 12:54:11 Size: 22.089.369.858 bytes
I 12:54:11 Sectors: 10.785.884
I 12:54:11 Image Size: 22.090.743.808 bytes
I 12:54:11 Image Sectors: 10.786.496
I 12:54:11 Operation Successfully Completed! - Duration: 00:00:01
I 12:54:22 Operation Started!
I 12:54:22 Building Image Tree...
I 12:54:23 Calculating Totals...
I 12:54:23 Preparing Image...
I 12:54:23 Contents: 92 Files, 16 Folders
I 12:54:23 Content Type: BD Video
I 12:54:23 Data Type: MODE1/2048
I 12:54:23 File System(s): UDF (2.50)
I 12:54:23 Volume Label: Sacrifice 2011 DB25 1080p
I 12:54:24 Size: 22.089.369.858 bytes
I 12:54:24 Sectors: 10.785.884
I 12:54:24 Image Size: 22.090.743.808 bytes
I 12:54:24 Image Sectors: 10.786.496
I 12:54:25 Operation Successfully Completed! - Duration: 00:00:02
I 12:54:25 Operation Started!
I 12:54:25 Source File: -==/\/[bUILD IMAGE]\/\==-
I 12:54:25 Source File Sectors: 10.786.496 (MODE1/2048)
I 12:54:25 Source File Size: 22.090.743.808 bytes
I 12:54:25 Source File Volume Identifier: Sacrifice 2011 DB25 1080p
I 12:54:25 Source File Volume Set Identifier: 3EA366CB00A4961C
I 12:54:25 Source File Application Identifier: ImgBurn v2.5.5.0
I 12:54:25 Source File Implementation Identifier: ImgBurn
I 12:54:25 Source File File System(s): UDF (2.50)
I 12:54:25 Destination Device: [0:0:0] HL-DT-ST BD-RE  WH10LS30 1.00 (H:) (ATA)
I 12:54:25 Destination Media Type: BD-R (Disc ID: OTCBDR-001-000) (Speeds: 2x, 4x)
I 12:54:25 Destination Media Sectors: 12.219.392
I 12:54:25 Write Mode: BD
I 12:54:25 Write Type: DAO
I 12:54:25 Write Speed: 2x
I 12:54:25 BD-R Verify Not Required: Yes
I 12:54:25 Link Size: Auto
I 12:54:25 Lock Volume: Yes
I 12:54:25 Test Mode: No
I 12:54:25 OPC: No
I 12:54:25 BURN-Proof: Enabled
I 12:54:25 Write Speed Successfully Set! - Effective: 8.991 KB/s (2x)
I 12:55:03 Filling Buffer... (77 MB)
I 12:55:05 Writing LeadIn...
W 12:55:19 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error
W 12:55:19 Retrying (1 of 20)...
W 12:55:33 Retry Failed - Reason: Power Calibration Area Error
W 12:55:33 Retrying (2 of 20)...
W 12:55:47 Retry Failed - Reason: Power Calibration Area Error
W 12:55:47 Retrying (3 of 20)...
W 12:56:00 Retry Failed - Reason: Power Calibration Area Error
W 12:56:00 Retrying (4 of 20)...
W 12:56:14 Retry Failed - Reason: Power Calibration Area Error
W 12:56:14 Retrying (5 of 20)...
W 12:56:28 Retry Failed - Reason: Power Calibration Area Error
W 12:56:28 Retrying (6 of 20)...
W 12:56:42 Retry Failed - Reason: Power Calibration Area Error
W 12:56:42 Retrying (7 of 20)...
W 12:56:56 Retry Failed - Reason: Power Calibration Area Error
W 12:56:56 Retrying (8 of 20)...
W 12:57:09 Retry Failed - Reason: Power Calibration Area Error
W 12:57:09 Retrying (9 of 20)...
W 12:57:23 Retry Failed - Reason: Power Calibration Area Error
W 12:57:23 Retrying (10 of 20)...
W 12:57:37 Retry Failed - Reason: Power Calibration Area Error
W 12:57:37 Retrying (11 of 20)...
W 12:57:51 Retry Failed - Reason: Power Calibration Area Error
W 12:57:51 Retrying (12 of 20)...
W 12:58:05 Retry Failed - Reason: Power Calibration Area Error
W 12:58:05 Retrying (13 of 20)...
W 12:58:18 Retry Failed - Reason: Power Calibration Area Error
W 12:58:19 Retrying (14 of 20)...
W 12:58:32 Retry Failed - Reason: Power Calibration Area Error
W 12:58:32 Retrying (15 of 20)...
W 12:58:46 Retry Failed - Reason: Power Calibration Area Error
W 12:58:46 Retrying (16 of 20)...
W 12:59:00 Retry Failed - Reason: Power Calibration Area Error
W 12:59:00 Retrying (17 of 20)...
W 12:59:14 Retry Failed - Reason: Power Calibration Area Error
W 12:59:14 Retrying (18 of 20)...
W 12:59:28 Retry Failed - Reason: Power Calibration Area Error
W 12:59:28 Retrying (19 of 20)...
W 12:59:41 Retry Failed - Reason: Power Calibration Area Error
W 12:59:41 Retrying (20 of 20)...
W 12:59:55 Retry Failed - Reason: Power Calibration Area Error
E 13:00:00 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error
I 13:00:00 Synchronising Cache...
W 13:00:03 User opted to skip the 'Close Track/Session/Disc' functions.
E 13:00:03 Failed to Write Image!
E 13:00:03 Operation Failed! - Duration: 00:05:37
I 13:00:03 Average Write Rate: N/A - Maximum Write Rate: N/A

log2.log

Share this post


Link to post
Share on other sites

Buy some others and see if they work.

 

'OTCBDR-001-000' just looks like cheap stuff to me.

 

but the thing is that I already used this kind of discs before, so why now?

Share this post


Link to post
Share on other sites

Because disc quality may vary even inblanks from the same batch? You could ask LG for newer firmware with better support for those blanks.

Share this post


Link to post
Share on other sites

Because disc quality may vary even inblanks from the same batch? You could ask LG for newer firmware with better support for those blanks.

ok, but how can i be sure that the disc will be a good one before a buy it?

 

I mean, which ones i must to nuy?

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.