Jump to content
Sign in to follow this  
luvmystf

Can't burn iso file on DVD-R

Recommended Posts

I've tried multiple times burning/writing an iso file to verbatim dvd-r. I've heard it's very good but somehow it never seems to work for me. After about 10 min, I end with this error message:

 

I/O Error!

 

Device:[0:1:0] HL-DT-ST DVD+-RW GT10N A107 (D:) (ATAPI)

 

ScsiStatus:0x02

Interpretation: Check Condition

 

CDB: 28 00 00 04 3B 30 00 00 01 00

Interpretation: Read (10)-Sector: 277296

 

Sense Area:70 00 03 00 00 00 00 0E 00 00 00 00 11 00 00 00 00 00

Interpretation: Unrecovered Read Error

 

Here are the logs if that helps any:

I 20:24:34 ImgBurn Version 2.5.5.0 started!

I 20:24:34 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600)

I 20:24:34 Total Physical Memory: 4,153,716 KB - Available: 2,719,580 KB

I 20:24:34 Initialising SPTI...

I 20:24:34 Searching for SCSI / ATAPI devices...

I 20:24:35 -> Drive 1 - Info: HL-DT-ST DVD+-RW GT10N A107 (D:) (ATAPI)

I 20:24:35 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (E:) (Unknown)

I 20:24:35 Found 1 DVD-ROM and 1 DVD±RW/RAM!

I 20:35:11 Operation Started!

I 20:35:11 Source File: C:\Users\Kulsoom\Downloads\Super Smash Bros. Brawl DVD5.iso

I 20:35:11 Source File Sectors: 2,294,912 (MODE1/2048)

I 20:35:11 Source File Size: 4,699,979,776 bytes

I 20:35:11 Source File Volume Identifier: Super Smash Bros. Brawl

I 20:35:11 Source File File System(s): Special

I 20:35:11 Destination Device: [0:1:0] HL-DT-ST DVD+-RW GT10N A107 (D:) (ATAPI)

I 20:35:11 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 2x, 4x, 8x)

I 20:35:11 Destination Media Sectors: 2,297,888

I 20:35:11 Write Mode: DVD

I 20:35:11 Write Type: DAO

I 20:35:11 Write Speed: 2.4x

I 20:35:11 Link Size: Auto

I 20:35:11 Lock Volume: Yes

I 20:35:11 Test Mode: No

I 20:35:11 OPC: No

I 20:35:11 BURN-Proof: Enabled

W 20:35:11 Write Speed Miscompare! - MODE SENSE: 2,770 KB/s (2x), GET PERFORMANCE: 11,080 KB/s (8x)

W 20:35:11 Write Speed Miscompare! - MODE SENSE: 2,770 KB/s (2x), GET PERFORMANCE: 11,080 KB/s (8x)

W 20:35:12 Write Speed Miscompare! - MODE SENSE: 2,770 KB/s (2x), GET PERFORMANCE: 11,080 KB/s (8x)

W 20:35:12 Write Speed Miscompare! - MODE SENSE: 2,770 KB/s (2x), GET PERFORMANCE: 11,080 KB/s (8x)

W 20:35:12 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 2,770 KB/s (2x) / 11,080 KB/s (8x)

I 20:35:12 Filling Buffer... (40 MB)

I 20:35:13 Writing LeadIn...

I 20:35:21 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911)

I 20:35:21 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911)

I 21:03:43 Synchronising Cache...

I 21:04:33 Exporting Graph Data...

I 21:04:33 Graph Data File: C:\Users\Kulsoom\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVD+-RW_GT10N_A107_TUESDAY-MAY-03-2011_8-35_PM_MCC_03RG20_2.4x.ibg

I 21:04:33 Export Successfully Completed!

I 21:04:33 Operation Successfully Completed! - Duration: 00:29:21

I 21:04:33 Average Write Rate: 2,698 KB/s (1.9x) - Maximum Write Rate: 2,952 KB/s (2.1x)

I 21:04:33 Cycling Tray before Verify...

W 21:44:50 Waiting for device to become ready...

I 21:45:00 Device Ready!

I 21:45:05 Operation Started!

I 21:45:05 Source Device: [0:1:0] HL-DT-ST DVD+-RW GT10N A107 (D:) (ATAPI)

I 21:45:05 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 03RG20) (Speeds: 2x, 4x, 8x)

I 21:45:05 Image File: C:\Users\Kulsoom\Downloads\Super Smash Bros. Brawl DVD5.iso

I 21:45:05 Image File Sectors: 2,294,912 (MODE1/2048)

I 21:45:05 Image File Size: 4,699,979,776 bytes

I 21:45:05 Image File Volume Identifier: Super Smash Bros. Brawl

I 21:45:05 Image File File System(s): Special

I 21:45:05 Read Speed (Data/Audio): MAX / MAX

I 21:45:05 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2294911)

I 21:45:05 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911)

W 21:47:20 Failed to Read Sector 277296 - Reason: Unrecovered Read Error

 

I've looked across many boards and different sites as to the cause of this problem but I don't seem to find any. Most people seem to have problems with after the disk has completed but I can't even get it to finish. Is there something I am doing wrong? I've looked at tutorials and all seem to be the way I am doing it. Also, after this error, my dvds are rendered useless so after a couple of tries, I've given up and hope someone out there can help me.

Share this post


Link to post
Share on other sites

Try burning at 4x or 8x, as those are 16x rated blanks after all. If it still doesn't work then you could try cleaning the drive with a lens cleaning disc.

Share this post


Link to post
Share on other sites

Also:

I 20:24:34 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600)

 

Any reason why you are not running SP1?

 

http://windows.microsoft.com/en-US/windows/downloads/service-packs

 

I had no idea I wasn't running it. Best Buy promised me all updates would be up to date as I have no time for that and this is a fairly new computer. I also wrongly assumed Windows updates would take care of that but I'm installing now as I type and will update on any developments.

 

Increasing speeds did not work at all. I only did it at 2x as thats what imgburn recommended.

 

Also, any clue on how to make my DVDs that were rendered useless and don't work anymore due to failures in burning iso image to work again? Are there free or paid programs for that? Or is it time to throw them away and its become a piece of junk.

Share this post


Link to post
Share on other sites

You should see if you can get some Taiyo Yuden (Victor JVC) discs and try those.

 

Failing that, assume that because your drive can't even burn (decent quality) 'MCC 03RG20' discs properly that it's not much use to you and get another one. I have no faith in slimline drives what so ever.

 

As for the discs that it's already messed up, well I'm afraid you just need to bin those, they're useless now.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.