Jump to content

Disks not finalising


petalnikki

Recommended Posts

Hi, firstly, I am not computer savvy so I apologise in advance if things don't sound right. I have tried to burn disks and they get through the process but when it comes to finalising the disk, I get an error. It reads: Unknown(Internal Target Failure)(ASC:0x44, ASCQ:0xD6). Can anyone help me solve this problem? All help is appreciated.

Link to comment
Share on other sites

Hi, firstly, I am not computer savvy so I apologise in advance if things don't sound right. I have tried to burn disks and they get through the process but when it comes to finalising the disk, I get an error. It reads: Unknown(Internal Target Failure)(ASC:0x44, ASCQ:0xD6). Can anyone help me solve this problem? All help is appreciated.

 

Oops! Sorry. See below. This means nothing to me??

PIONEER DVD-RW DVR-106D 1.08 (ATA)

Current Profile: DVD+R

 

Disc Information:

Status: Unknown

State of Last Session: Unknown

Erasable: Unknown

Formatted: Unknown

Sessions: Unknown

Supported Write Speeds: 2.4x, 4x

 

Performance (Write Speed):

Descriptor 1...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 1,385 KB/s (1x) - WS: 3,324 KB/s (2.4x)

Descriptor 2...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 1,385 KB/s (1x) - WS: 5,540 KB/s (4x)

Link to comment
Share on other sites

Post a log please (as per the pink box up the top :chair: )

Sorry put last info in reply to myself. It's been a long day therefore the dumb moments.

 

PIONEER DVD-RW DVR-106D 1.08 (ATA)

Current Profile: DVD+R

 

Disc Information:

Status: Unknown

State of Last Session: Unknown

Erasable: Unknown

Formatted: Unknown

Sessions: Unknown

Supported Write Speeds: 2.4x, 4x

 

Performance (Write Speed):

Descriptor 1...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 1,385 KB/s (1x) - WS: 3,324 KB/s (2.4x)

Descriptor 2...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 1,385 KB/s (1x) - WS: 5,540 KB/s (4x)

Link to comment
Share on other sites

Thanks for showning me. It was turned off for some reason. My computer has the odd "visual memory is low" pop up every couple of days. It that is any help. Not sure what it means as when I click on it, it disappears. Could this be adding to the problem?

Log below:

 

I 21:53:24 ImgBurn Version 2.5.5.0 started!

I 21:53:24 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 21:53:24 Total Physical Memory: 523,756 KB - Available: 86,524 KB

W 21:53:24 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 21:53:24 Initialising SPTI...

I 21:53:24 Searching for SCSI / ATAPI devices...

I 21:53:25 -> Drive 1 - Info: PIONEER DVD-RW DVR-106D 1.08 (D:) (ATA)

I 21:53:25 Found 1 DVD±RW!

I 21:53:35 Operation Started!

I 21:53:35 Source File: C:\Users\Administrator\My Documents\My ISO Files\NVE_DVD.ISO

I 21:53:35 Source File Sectors: 953,137 (MODE1/2048)

I 21:53:35 Source File Size: 1,952,024,576 bytes

I 21:53:35 Source File Volume Identifier: NVE_DVD

I 21:53:35 Source File Volume Set Identifier: 05B1BA96DVDSHRNK

I 21:53:35 Source File Implementation Identifier: DVD Shrink

I 21:53:35 Source File File System(s): ISO9660, UDF (1.02)

I 21:53:35 Destination Device: [0:1:0] PIONEER DVD-RW DVR-106D 1.08 (D:) (ATA)

I 21:53:35 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 2.4x, 4x)

I 21:53:35 Destination Media Sectors: 2,295,104

I 21:53:35 Write Mode: DVD

I 21:53:35 Write Type: Incremental

I 21:53:35 Write Speed: 8x

I 21:53:35 DVD+R Reserve Track: No

I 21:53:35 Link Size: Auto

I 21:53:35 Lock Volume: Yes

I 21:53:35 Test Mode: No

I 21:53:35 OPC: No

I 21:53:35 BURN-Proof: Enabled

W 21:53:35 Write Speed Miscompare! - Wanted: 11,080 KB/s (8x), Got: 5,540 KB/s (4x)

I 21:53:35 Filling Buffer... (20 MB)

I 21:53:36 Writing LeadIn...

I 21:53:51 Writing Session 1 of 1... (1 Track, LBA: 0 - 953136)

I 21:53:51 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 953136)

I 21:59:33 Synchronising Cache...

I 21:59:34 Closing Track...

I 21:59:36 Finalising Disc...

W 21:59:39 Potential 'WaitImmediateIO' Deferred Error - (0%, 1/3) - Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

W 21:59:39 Finalise Disc Failed! - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

W 21:59:39 Retrying (1 of 3)...

W 21:59:40 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

W 21:59:40 Retry Failed - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

W 21:59:40 Retrying (2 of 3)...

W 21:59:41 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

W 21:59:41 Retry Failed - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

W 21:59:41 Retrying (3 of 3)...

W 21:59:42 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

W 21:59:42 Retry Failed - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

I 21:59:45 Image MD5: 321c94c41f32f1ac6c9c268f2d287aeb

I 21:59:45 Operation Successfully Completed! - Duration: 00:06:10

I 21:59:45 Average Write Rate: 5,590 KB/s (4.0x) - Maximum Write Rate: 5,750 KB/s (4.2x)

Link to comment
Share on other sites

Says it was completed as options were: Cancel, Try again and Continue.

When hitting continue, it says complete but has not finalised and cannot view disk.

 

I 21:59:45 Operation Successfully Completed! - Duration: 00:06:10

I 21:59:45 Average Write Rate: 5,590 KB/s (4.0x) - Maximum Write Rate: 5,750 KB/s (4.2x)

Link to comment
Share on other sites

You mean Virtual memory I guess. It's because your system doesn't have enough RAM to cope with whatever you're trying to do with it and your pagefile settings aren't sufficient to take up the slack.

 

Your drive is getting on a bit now and you're using discs with a cheapo dye/MID (CMC MAG-M01-00).

 

I 21:53:35 Write Type: Incremental

I 21:53:35 Write Speed: 8x

 

Why have you change the write type? put it back on DAO/SAO.

 

8x isn't an option for your drive/firmware/media combo.

 

I 21:53:35 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 2.4x, 4x)

 

You could try cleaning the drive with a cleaning disc, that may help.

 

Failing that, get some better discs. Verbatim disc with MCC or MKM dye/MID, or Taiyo Yuden (Victor JVC) discs.

 

The other option would be to get a new drive.

Link to comment
Share on other sites

You mean Virtual memory I guess. It's because your system doesn't have enough RAM to cope with whatever you're trying to do with it and your pagefile settings aren't sufficient to take up the slack.

 

Your drive is getting on a bit now and you're using discs with a cheapo dye/MID (CMC MAG-M01-00).

 

I 21:53:35 Write Type: Incremental

I 21:53:35 Write Speed: 8x

 

Why have you change the write type? put it back on DAO/SAO.

 

8x isn't an option for your drive/firmware/media combo.

 

I 21:53:35 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 2.4x, 4x)

 

You could try cleaning the drive with a cleaning disc, that may help.

 

Failing that, get some better discs. Verbatim disc with MCC or MKM dye/MID, or Taiyo Yuden (Victor JVC) discs.

 

The other option would be to get a new drive.

 

Virtual memory that is correct. Sorry.

As for changing Settings i've never touched them but did change as you recommended. I have used a variety of disk from the good to cheap and in the past have found it didn't make much difference. I am currently out of Vert's so that will be on the shopping list. I will stick to them. As for an old computer, I am hoping to upgrade soon. It is soooooo slow when the kids are on laptops and takes ages for pages to load. I 'spose mine is ancient in technology terms. Ha Ha. Although new burn didn't work, I will take on board all your recommendations and thank you very much for your time in helping me out tonight. Enjoy your weekend.

 

I 22:18:03 ImgBurn Version 2.5.5.0 started!

I 22:18:03 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 22:18:03 Total Physical Memory: 523,756 KB - Available: 78,392 KB

W 22:18:03 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 22:18:03 Initialising SPTI...

I 22:18:03 Searching for SCSI / ATAPI devices...

I 22:18:03 -> Drive 1 - Info: PIONEER DVD-RW DVR-106D 1.08 (D:) (ATA)

I 22:18:03 Found 1 DVD±RW!

I 22:19:18 Operation Started!

I 22:19:18 Source File: C:\Users\Administrator\My Documents\My ISO Files\VOYAGE_OF_THE_DAWN_TREADER.ISO

I 22:19:18 Source File Sectors: 1,502,195 (MODE1/2048)

I 22:19:18 Source File Size: 3,076,495,360 bytes

I 22:19:18 Source File Volume Identifier: VOYAGE_OF_THE_DAWN_TREADER

I 22:19:18 Source File Volume Set Identifier: 00AE35A8DVDSHRNK

I 22:19:18 Source File Implementation Identifier: DVD Shrink

I 22:19:18 Source File File System(s): ISO9660, UDF (1.02)

I 22:19:18 Destination Device: [0:1:0] PIONEER DVD-RW DVR-106D 1.08 (D:) (ATA)

I 22:19:18 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 2.4x, 4x)

I 22:19:18 Destination Media Sectors: 2,295,104

I 22:19:18 Write Mode: DVD

I 22:19:18 Write Type: DAO

I 22:19:18 Write Speed: 4x

I 22:19:18 DVD+R Reserve Track: No

I 22:19:18 Link Size: Auto

I 22:19:18 Lock Volume: Yes

I 22:19:18 Test Mode: No

I 22:19:18 OPC: No

I 22:19:18 BURN-Proof: Enabled

I 22:19:18 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

I 22:19:18 Filling Buffer... (20 MB)

I 22:19:20 Writing LeadIn...

I 22:19:35 Writing Session 1 of 1... (1 Track, LBA: 0 - 1502194)

I 22:19:35 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1502194)

I 22:28:34 Synchronising Cache...

I 22:28:35 Closing Track...

I 22:28:37 Finalising Disc...

W 22:28:40 Potential 'WaitImmediateIO' Deferred Error - (0%, 1/3) - Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

W 22:28:40 Finalise Disc Failed! - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

W 22:28:40 Retrying (1 of 3)...

W 22:28:41 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

W 22:28:41 Retry Failed - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

W 22:28:41 Retrying (2 of 3)...

W 22:28:42 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

W 22:28:42 Retry Failed - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

W 22:28:42 Retrying (3 of 3)...

W 22:28:49 Potential 'WaitImmediateIO' Deferred Error - (0%, 1/3) - Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

W 22:28:49 Retry Failed - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

W 22:28:53 Retrying (4)...

W 22:29:12 Potential 'WaitImmediateIO' Deferred Error - (0%, 1/3) - Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

W 22:29:12 Retry Failed - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

E 22:29:15 Finalise Disc Failed! - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xD6)

I 22:29:15 Finalising Disc (Last Attempt!)...

Link to comment
Share on other sites

I 22:18:03 Total Physical Memory: 523,756 KB - Available: 78,392 KB

 

You better add some more RAM memory in that computer.

 

Thanks. It's ancient in computer terms and am trying to update it soon. I appreciate your help.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.