Jump to content

Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB


Boon1995

Recommended Posts

I 19:35:06 ImgBurn Version 2.5.6.0 started!

I 19:35:06 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 19:35:06 Total Physical Memory: 916.716 KB - Available: 419.068 KB

W 19:35:06 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 19:35:06 Initialising SPTI...

I 19:35:06 Searching for SCSI / ATAPI devices...

I 19:35:06 -> Drive 1 - Info: HL-DT-ST DVD-RAM GSA-H58N 1.01-07 (D:) (ATA)

I 19:35:06 -> Drive 2 - Info: QBC MRSHA3S52 1.04 (I:) (SCSI)

I 19:35:06 Found 1 DVD±RW/RAM and 1 BD-ROM!

W 19:35:42 User accepted disc space warning and is attempting to truncate!

I 19:35:42 Operation Started!

I 19:35:42 Source File: C:\Dokumente und Einstellungen\user\Eigene Dateien\Downloads\Jloader Sachen\cesetagapu\Filename.dvd

I 19:35:42 Source File Sectors: 4.267.015 (MODE1/2048)

I 19:35:42 Source File Size: 8.738.846.720 bytes

I 19:35:42 Source File Volume Identifier: DVD_ROM

I 19:35:42 Source File Volume Set Identifier: ea214000MS UDFBridge

I 19:35:42 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 19:35:42 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 19:35:42 Source File File System(s): ISO9660; UDF (1.50)

I 19:35:42 Destination Device: [0:0:0] HL-DT-ST DVD-RAM GSA-H58N 1.01 (D:) (ATA)

I 19:35:42 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)

I 19:35:42 Destination Media Supported Write Speeds: 4x; 6x; 8x

I 19:35:42 Destination Media Sectors: 4.173.824

I 19:35:42 Write Mode: DVD

I 19:35:42 Write Type: DAO

I 19:35:42 Write Speed: 2,4x

I 19:35:42 Link Size: Auto

I 19:35:42 Lock Volume: Yes

I 19:35:42 Test Mode: No

I 19:35:42 OPC: No

I 19:35:42 BURN-Proof: Enabled

W 19:35:42 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 5.540 KB/s (4x)

W 19:35:42 The drive only supports writing these discs at 4x; 6x; 8x.

I 19:35:42 Book Type Setting: DVD-ROM

W 19:35:42 Optimal layer break position exceeds L0 capacity.

W 19:35:42 Optimal L0 Sectors: 2.133.520

W 19:35:42 Maximum L0 Sectors: 2.086.912

I 19:35:42 Optimal L0 Data Zone Capacity: 2.133.520

I 19:35:42 Optimal L0 Data Zone Method: Copied From Original Disc

W 19:35:42 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB

E 19:35:48 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB

E 19:35:48 Operation Failed! - Duration: 00:00:05

I 19:35:48 Average Write Rate: N/A - Maximum Write Rate: N/A

 

 

Whats wrong?

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.