Jump to content

XDG3


uppercutter

Recommended Posts

Hi,

 

I have been trying to burn a XDG3 file following the tutorials and instructions I have seen on the internet for that kind of files, and I get the following log (I used verbatim DVD + R DL):

I 15:59:16 ImgBurn Version 2.5.6.0 started!

I 15:59:16 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 15:59:16 Total Physical Memory: 523.500 KB - Available: 201.680 KB

W 15:59:16 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 15:59:16 Initialising SPTI...

I 15:59:16 Searching for SCSI / ATAPI devices...

I 15:59:17 -> Drive 1 - Info: HL-DT-ST DVD-ROM GDR8163B 0L23-0B (E:) (ATA)

I 15:59:17 -> Drive 2 - Info: HL-DT-ST DVDRAM GSA-4120B A102-01 (D:) (ATA)

I 15:59:17 -> Drive 3 - Info: HL-DT-ST DVDRAM GH22NS50 TN03-01 (F:) (SCSI)

I 15:59:17 Found 1 DVD-ROM and 2 DVD±RW/RAMs!

W 15:59:58 User accepted disc space warning and is attempting to truncate!

I 15:59:59 Operation Started!

I 15:59:59 Source File: C:\Downloads\Batman Arkham City [MULTI5][XBOX360][Region Free][XDG3][XPG][WwW.GamesTorrents.CoM]\Batman.A.C-XPG.dvd

I 15:59:59 Source File Sectors: 4.267.015 (MODE1/2048)

I 15:59:59 Source File Size: 8.738.846.720 bytes

I 15:59:59 Source File Volume Identifier: DVD_ROM

I 15:59:59 Source File Volume Set Identifier: ea214000MS UDFBridge

I 15:59:59 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 15:59:59 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 15:59:59 Source File File System(s): ISO9660; UDF (1.50)

I 15:59:59 Destination Device: [2:2:0] HL-DT-ST DVDRAM GH22NS50 TN03 (F:) (SCSI)

I 15:59:59 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)

I 15:59:59 Destination Media Supported Write Speeds: 2,4x; 4x; 6x; 8x

I 15:59:59 Destination Media Sectors: 4.173.824

I 15:59:59 Write Mode: DVD

I 15:59:59 Write Type: DAO

I 15:59:59 Write Speed: 2,4x

I 15:59:59 Link Size: Auto

I 15:59:59 Lock Volume: Yes

I 15:59:59 Test Mode: No

I 15:59:59 OPC: No

I 15:59:59 BURN-Proof: Enabled

I 15:59:59 Write Speed Successfully Set! - Effective: 3.324 KB/s (2,4x)

I 15:59:59 Book Type Setting: DVD-ROM

W 15:59:59 Optimal layer break position exceeds L0 capacity.

W 15:59:59 Optimal L0 Sectors: 2.133.520

W 15:59:59 Maximum L0 Sectors: 2.086.912

I 15:59:59 Optimal L0 Data Zone Capacity: 2.133.520

I 15:59:59 Optimal L0 Data Zone Method: Copied From Original Disc

W 15:59:59 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List

I 16:00:35 Filling Buffer... (20 MB)

I 16:00:36 Writing LeadIn...

I 16:01:06 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)

I 16:01:06 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)

I 16:01:06 Writing Layer 0... (LBA: 0 - 2086911)

W 16:22:35 Failed to Write Sectors 2071744 - 2071775 - Reason: Spindle Servo Failure

W 16:22:35 Retrying (1 of 20)...

W 16:22:35 Retry Failed - Reason: Spindle Servo Failure

W 16:22:35 Retrying (2 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (3 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (4 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (5 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (6 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (7 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (8 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (9 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (10 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (11 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (12 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (13 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (14 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (15 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (16 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (17 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (18 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (19 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

W 16:22:35 Retrying (20 of 20)...

W 16:22:35 Retry Failed - Reason: Invalid Address For Write

E 16:32:44 Failed to Write Sectors 2071744 - 2071775 - Reason: Spindle Servo Failure

E 16:32:44 Next Writable Address: 2071232

I 16:32:44 Synchronising Cache...

I 16:32:48 Closing Track...

I 16:32:52 Finalising Disc...

E 16:55:19 Failed to Write Image!

I 16:55:19 Exporting Graph Data...

I 16:55:19 Graph Data File: C:\Documents and Settings\Administrador\Datos de programa\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH22NS50_TN03_JUEVES-03-DE-NOVIEMBRE-DE-2011_15-59_MKM-003-00_2,4x.ibg

I 16:55:19 Export Successfully Completed!

E 16:55:19 Operation Failed! - Duration: 00:55:20

I 16:55:19 Average Write Rate: 2.184 KB/s (1.6x) - Maximum Write Rate: 3.366 KB/s (2.4x)

I 16:56:01 Close Request Acknowledged

I 16:56:01 Closing Down...

I 16:56:02 Shutting down SPTI...

I 16:56:02 ImgBurn closed!

 

Is there anything I am doing that is wrong? Why do I get the error messages?

 

Thanks,

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.