Jump to content
Sign in to follow this  
errupin

L0 Data Zone Capacity Miscompare

Recommended Posts

Hi!

 

This is the first time I use the brand new "build" option of ImgBurn to create an ISO image. When I try to burn the image via the MDS file I got the following log, where it warns about a "L0 Data Zone Capacity Miscompare", even if the process finalilzes succesfully. Should I worry about this error? the dvd+r that I got seems to be correct. Thanks and congratulations for this software.

 

Best regards,

 

Errupin.

 

 

I 13:02:51 ImgBurn Version 2.0.0.0 started!

I 13:02:51 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 13:02:51 Initialising SPTI...

I 13:02:51 Searching for SCSI / ATAPI devices...

I 13:02:51 Found 2 DVD?RWs!

I 13:03:35 Operation Started!

I 13:03:35 Source File: D:\DVD\WILLOW\WILLOW.MDS

I 13:03:35 Source File Sectors: 3.887.536 (MODE1/2048)

I 13:03:35 Source File Size: 7.961.673.728 bytes

I 13:03:35 Source File Volume Identifier: WILLOW

I 13:03:35 Source File Application Identifier: IMGBURN - THE ULTIMATE IMAGE BURNER! © 2006 LIGHTNING UK!

I 13:03:35 Source File Implementation Identifier: ImgBurn

I 13:03:35 Source File File System(s): ISO9660; UDF (1,02)

I 13:03:35 Destination Device: [0:0:0] PIONEER DVD-RW DVR-111D 1.06 (E:) (ATA)

I 13:03:35 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2,4x; 4x; 6x; 8x)

I 13:03:35 Destination Media Sectors: 4.173.824

I 13:03:35 Write Mode: DVD

I 13:03:35 Write Type: DAO

I 13:03:35 Write Speed: 2x

I 13:03:35 Link Size: Auto

I 13:03:35 Test Mode: No

I 13:03:35 BURN-Proof: Enabled

I 13:03:35 Optimal L0 Data Zone Capacity: 1.943.775

I 13:03:35 Optimal L0 Data Zone Method: Copied From Original Disc

W 13:03:59 L0 Data Zone Capacity Miscompare!

W 13:03:59 Wanted: 1943775, Got: 1943776

I 13:04:08 Filling Buffer...

I 13:04:09 Writing LeadIn...

I 13:04:10 Writing Image...

I 13:04:10 Writing Layer 0... (LBA: 0 - 1943774)

I 13:24:26 Writing Layer 1... (LBA: 1943775 - 3887535)

I 13:44:50 Synchronising Cache...

I 13:44:51 Closing Track...

I 13:44:52 Finalising Disc...

I 13:45:52 Image MD5: cd2fe5e8c7e434520260ecd66b9c7794

I 13:45:52 Operation Successfully Completed! - Duration: 00:42:16

I 13:45:52 Average Write Rate: 3.187 KB/s (2.3x) - Maximum Write Rate: 3.385 KB/s (2.4x)

Share this post


Link to post
Share on other sites

Do you still have the files you built the ISO from?

 

If so, are they DVD Video files? i.e. IFO/BUP/VOB ones.

 

During the initial build did you get a 'Create Layer Break Position' dialog box come up?

 

If you did, can you please get it up on the screen again and take a screenshot of the window - perhaps with the same option selected that you selected when you actually built the image.

 

Basically the MDS file is wrong and that probably means the padding for the layer break is wrong too.

 

(Since v2 was released I've fixed a couple of bugs to do with 32k padding on certain sets of dvd video files. One of these bugs could indeed cause this padding problem.)

Share this post


Link to post
Share on other sites
Do you still have the files you built the ISO from?

 

If so, are they DVD Video files? i.e. IFO/BUP/VOB ones.

 

During the initial build did you get a 'Create Layer Break Position' dialog box come up?

 

If you did, can you please get it up on the screen again and take a screenshot of the window - perhaps with the same option selected that you selected when you actually built the image.

 

Basically the MDS file is wrong and that probably means the padding for the layer break is wrong too.

 

(Since v2 was released I've fixed a couple of bugs to do with 32k padding on certain sets of dvd video files. One of these bugs could indeed cause this padding problem.)

 

 

Yes, they were dvd video files. The program offered me different options to set the layer break in a dialog box, one was blue and four were grey, so I choose the blue one. Unfortunatelly I do not have the original files since I deleted them. The dvd plays fine and the layer jump goes Ok and smoothly, but I am worried since the dvd may have some wrong zone that i will not notice yet.

 

Thanks for your help.

Share this post


Link to post
Share on other sites

If the layerbreak bit plays ok then you've nothing to worry about. Your player probably just isn't fussy about them - as is the case with most players now.

 

Keep an eye out for v2.1 as it will/should fix this issue.

Share this post


Link to post
Share on other sites
If the layerbreak bit plays ok then you've nothing to worry about. Your player probably just isn't fussy about them - as is the case with most players now.

 

Keep an eye out for v2.1 as it will/should fix this issue.

 

 

THANKS

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.