Jump to content

Verbatim LTH Type


jamesr4199

Recommended Posts

Just tried to use Verbatim BR-R LTH Type 25 gb 6x discs and ingburn will not burn the disc. I get this error message.

I/O Error!

Device: [5:0:0] HL-DT-ST BD-RE GGW-H20L YL05 (G:) (RAID)

 

SCSISATUS: 0X02

Interpertation: Write (12) - Sectors: 96 -127

 

Sence Area: 71 00 03 00 00 00 00 0A 37 2D 03 B4 0C 00 00 00 00

00

SK Interpretation: Medium Error

ASC/ASCQ Interpretation: Write Error

 

Does this mean that these discs are not compatable???

 

Thanks Jimpost-46162-0-53636300-1335967359_thumb.jpg

Link to comment
Share on other sites

Basicaly yes, the drive don't like the disc.

 

A log would be more helpful than a screenshot. See the pink box at the top.

 

From what I can see in the pic, the firmware on your drive is outdated.

 

Try the latest, maybe it solves the problem for you. http://www.firmwarehq.com/download_1859-file_GGW-H20L_YL07(EW).zip.html

Link to comment
Share on other sites

/****************************************\\

; ImgBurn Version 2.5.7.0 - Log

; Friday, 27 April 2012, 08:44:16

; \\****************************************//

;

;

I 08:18:32 ImgBurn Version 2.5.7.0 started!

I 08:18:32 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)

I 08:18:32 Total Physical Memory: 2,881,060 KB - Available: 1,896,216 KB

W 08:18:32 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 08:18:32 Initialising SPTI...

I 08:18:32 Searching for SCSI / ATAPI devices...

I 08:18:32 -> Drive 1 - Info: HL-DT-ST BD-RE GGW-H20L YL05 (G:) (RAID)

I 08:18:32 -> Drive 2 - Info: HL-DT-ST BD-RE WH10LS30 1.00-06 (H:) (RAID)

I 08:18:32 -> Drive 3 - Info: PLDS DVD+-RW DH-16A6S YD11 (F:) (RAID)

I 08:18:32 -> Drive 4 - Info: TSSTcorp DVD-ROM TS-H353B D500 (E:) (RAID)

I 08:18:32 Found 1 DVD-ROM, 1 DVD±RW/RAM, 1 BD-RE and 1 HD DVD-ROM/BD-RE!

I 08:44:16 Close Request Acknowledged

I 08:44:16 Closing Down...

I 08:44:16 Shutting down SPTI...

I 08:44:16 ImgBurn closed!

 

;OK here is the Log file. I just tried with Phillips BD-R 1-6x and got same result. I have loaded the new firmware and I'm going to try it now.

Edited by jamesr4199
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.