Jump to content

hang at 99% writing CD-R, never completes process


mtgldr

Recommended Posts

HP laptop, 32 bit XP Here's the log and a screen shot. This is the third disk that has done this. THe first sat for 21 minutes before I cancelled it, the second had a bunch of errors because I tried to slow the burn speed down to 4x and the log said the drive will only work at 10x, 16x & 24x, This last time I let it run thinking maybe I wasn't waiting long enough. Any suggestions would be appreciated. Trying to burn an image of a bin file (win 7 rescue disk) to a CD. I've googled and there does not appear to be any other driver for the CD/DVR Drive.

 

Heres the pre-cancel and the post cancel logs:

 

Pre cancellation log (screen shot at bottom of ImgBurn before I cancelled it):

 

I 22:18:49 ImgBurn Version 2.5.7.0 started!

I 22:18:49 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 22:18:49 Total Physical Memory: 2,880,300 KB - Available: 2,266,076 KB

I 22:18:49 Initialising SPTI...

I 22:18:49 Searching for SCSI / ATAPI devices...

I 22:18:50 -> Drive 1 - Info: hp DVDRAM GT31L MR52 (D:) (ATA)

I 22:18:50 Found 1 DVD±RW/RAM!

I 22:19:21 Operation Started!

I 22:19:21 Source File: C:\Documents and Settings\Scott\Desktop\Repair disc Windows 7 64-bit\Repair disc Windows 7 64-bit.cue

I 22:19:21 Source File Sectors: 84,824 (MODE2/FORM1/2352)

I 22:19:21 Source File Size: 199,506,048 bytes

I 22:19:21 Source File Volume Identifier: Repair disc Windows 7 64-bit

I 22:19:21 Source File Volume Set Identifier: 001A030ERepair disc Windows 7 64-bit

I 22:19:21 Source File Implementation Identifier: Microsoft IMAPI2 1.0

I 22:19:21 Source File File System(s): ISO9660 (Bootable), Joliet, UDF (1.02)

I 22:19:21 Destination Device: [1:0:0] hp DVDRAM GT31L MR52 (D:) (ATA)

I 22:19:21 Destination Media Type: CD-R (Disc ID: 97m17s06f, Moser Baer India)

I 22:19:21 Destination Media Supported Write Speeds: 10x, 16x, 24x

I 22:19:21 Destination Media Sectors: 359,847

I 22:19:21 Write Mode: CD

I 22:19:21 Write Type: SAO

I 22:19:21 Write Speed: 10x

I 22:19:21 Lock Volume: Yes

I 22:19:21 Test Mode: No

I 22:19:21 OPC: No

I 22:19:21 BURN-Proof: Enabled

I 22:19:21 Write Speed Successfully Set! - Effective: 1,764 KB/s (10x)

I 22:19:21 Filling Buffer... (80 MB)

I 22:19:23 Writing LeadIn...

I 22:19:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 84823)

I 22:19:50 Writing Track 1 of 1... (MODE2/FORM1/2352, LBA: 0 - 84823)

 

Post cancellation log:

 

I 22:18:49 ImgBurn Version 2.5.7.0 started!

I 22:18:49 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 22:18:49 Total Physical Memory: 2,880,300 KB - Available: 2,266,076 KB

I 22:18:49 Initialising SPTI...

I 22:18:49 Searching for SCSI / ATAPI devices...

I 22:18:50 -> Drive 1 - Info: hp DVDRAM GT31L MR52 (D:) (ATA)

I 22:18:50 Found 1 DVD±RW/RAM!

I 22:19:21 Operation Started!

I 22:19:21 Source File: C:\Documents and Settings\Scott\Desktop\Repair disc Windows 7 64-bit\Repair disc Windows 7 64-bit.cue

I 22:19:21 Source File Sectors: 84,824 (MODE2/FORM1/2352)

I 22:19:21 Source File Size: 199,506,048 bytes

I 22:19:21 Source File Volume Identifier: Repair disc Windows 7 64-bit

I 22:19:21 Source File Volume Set Identifier: 001A030ERepair disc Windows 7 64-bit

I 22:19:21 Source File Implementation Identifier: Microsoft IMAPI2 1.0

I 22:19:21 Source File File System(s): ISO9660 (Bootable), Joliet, UDF (1.02)

I 22:19:21 Destination Device: [1:0:0] hp DVDRAM GT31L MR52 (D:) (ATA)

I 22:19:21 Destination Media Type: CD-R (Disc ID: 97m17s06f, Moser Baer India)

I 22:19:21 Destination Media Supported Write Speeds: 10x, 16x, 24x

I 22:19:21 Destination Media Sectors: 359,847

I 22:19:21 Write Mode: CD

I 22:19:21 Write Type: SAO

I 22:19:21 Write Speed: 10x

I 22:19:21 Lock Volume: Yes

I 22:19:21 Test Mode: No

I 22:19:21 OPC: No

I 22:19:21 BURN-Proof: Enabled

I 22:19:21 Write Speed Successfully Set! - Effective: 1,764 KB/s (10x)

I 22:19:21 Filling Buffer... (80 MB)

I 22:19:23 Writing LeadIn...

I 22:19:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 84823)

I 22:19:50 Writing Track 1 of 1... (MODE2/FORM1/2352, LBA: 0 - 84823)

I 07:19:08 Abort Request Acknowledged

I 07:19:08 Synchronising Cache...

W 07:19:09 Potential 'WaitImmediateIO' Deferred Error - (1/3) - Track Following Error

W 07:19:09 Synchronise Cache Failed! - Reason: Track Following Error

E 07:19:10 Synchronise Cache Failed! - Reason: Track Following Error

E 07:19:12 Failed to Write Image!

I 07:19:12 Exporting Graph Data...

I 07:19:13 Graph Data File: C:\Documents and Settings\Scott\Application Data\ImgBurn\Graph Data Files\hp_DVDRAM_GT31L_MR52_SUNDAY-MAY-20-2012_10-19_PM_97m17s06f_10x.ibg

I 07:19:13 Export Successfully Completed!

E 07:19:13 Operation Aborted! - Duration: 08:59:50

I 07:19:13 Average Write Rate: 6 KB/s (0.0x) - Maximum Write Rate: 1,763 KB/s (10.2x)

 

 

Thanks for any advice.

post-46272-0-33260800-1337599520_thumb.jpg

Link to comment
Share on other sites

  • 6 years later...

Hello.

 

I don't see my exact issue, so I'll add to this thread.  Please advise if you'd prefer I open a new topic.

 

The last several (5?) attempts to burn have resulted in the process hanging up at either 1% or 6% and no further.  This hasn't been an issue before.  Dell OptiPlex with external Samsung burning drive.

 

I suspect that is not enough information for you.  Your help is greatly appreciated.

 

Thank you very much.

Link to comment
Share on other sites

Like you posted too little information.

I also have a Samsung burning drive in an external enclosure.

It won't complete burning a CD.

I'm certain the problem is in the chipset in the external enclosure.

It can read a CD fine & it can rip & burn a DVD with no problem.

If you can try mounting the Samsung as an internal drive.

I bet the problem disappears.

Link to comment
Share on other sites

  • 3 weeks later...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.