Jump to content

I/O Error: scsistatus 0x02


Thaepicasian

Recommended Posts

Lately, I've been trying to burn xbox 360 backups, but every single time I try, Imgburn shows a scsistatus 0x02 error at around 50%.

I would post the error text, but I would not like to waste a perfectly good DL disc is not necessary (Unless there is a way to check that without wasting another disc...?).

I've already searched through many Imgburn forums concerning this issue, yet I still could not find my answer.

I am not very experienced with this program, so if my question is stupid, I apologize.

 

Is there any solution? Can anyone please explain this problem to me?

 

Family tree:

ACPI x64-based PC

Microsoft ACPI-Compliant System

PCI bus

Intel® 5 Series 6 Port SATA AHCI Controller (Ven_8086&DEV_3B2F - Intel - iaStorA - v7.0.0.1013

Cd_Rom Drive (TSSTcorp DVD+-RW TS-L633C SCSI CdRom Device)

(Bus Number 1, Target Id 0, LUN 0)

 

Disc: Verbatim DVD+R DL 2.4x

 

Here is the log:

 

I 19:30:51 ImgBurn Version 2.5.7.0 started!

I 19:30:51 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600)

I 19:30:51 Total Physical Memory: 3,985,944 KB - Available: 2,423,428 KB

I 19:30:51 Initialising SPTI...

I 19:30:51 Searching for SCSI / ATAPI devices...

I 19:30:51 -> Drive 1 - Info: TSSTcorp DVD+-RW TS-L633C DW50 (D:) (SATA)

I 19:30:51 Found 1 DVD±RW/RAM!

I 19:41:03 Operation Started!

I 19:41:03 Source File: C:\Users\Dylan\Desktop\Games\Xbox 360 Games\Resident Evil 5\R-45447-999-63-2.dvd

I 19:41:03 Source File Sectors: 3,825,924 (MODE1/2048)

I 19:41:03 Source File Size: 7,835,492,352 bytes

I 19:41:03 Source File Volume Identifier: XGD2DVD_NTSC

I 19:41:03 Source File Volume Set Identifier: 34672923

I 19:41:03 Source File Implementation Identifier: Sonic Scenarist 3.1

I 19:41:03 Source File File System(s): ISO9660, UDF (1.02)

I 19:41:03 Destination Device: [0:0:0] TSSTcorp DVD+-RW TS-L633C DW50 (D:) (SATA)

I 19:41:03 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00)

I 19:41:03 Destination Media Supported Write Speeds: 2.4x

I 19:41:03 Destination Media Sectors: 4,173,824

I 19:41:03 Write Mode: DVD

I 19:41:03 Write Type: DAO

I 19:41:03 Write Speed: MAX

I 19:41:03 DVD+R DL Reserve Track: No

I 19:41:03 Link Size: Auto

I 19:41:03 Lock Volume: Yes

I 19:41:03 Test Mode: No

I 19:41:03 OPC: No

I 19:41:03 BURN-Proof: Enabled

W 19:41:03 Write Speed Miscompare! - MODE SENSE: 2,770 KB/s (2x), GET PERFORMANCE: 3,324 KB/s (2.4x)

I 19:41:03 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 19:41:03 Book Type Setting: DVD-ROM

I 19:41:03 Optimal L0 Data Zone Capacity: 1,913,760

I 19:41:03 Optimal L0 Data Zone Method: Copied From Original Disc

I 19:54:28 Set L0 Data Zone Capacity Succeeded!

I 19:54:29 Filling Buffer... (80 MB)

I 19:54:30 Writing LeadIn...

I 19:54:32 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)

I 19:54:32 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)

I 19:54:32 Writing Layer 0... (LBA: 0 - 1913759)

W 20:15:39 Failed to Write Sectors 1803616 - 1803647 - Reason: Write Error

W 20:15:39 Retrying (1 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (2 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (3 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (4 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (5 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (6 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (7 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (8 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (9 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (10 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (11 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (12 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (13 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (14 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (15 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (16 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (17 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (18 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (19 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:39 Retrying (20 of 20)...

W 20:15:39 Retry Failed - Reason: Invalid Address For Write

W 20:15:47 Retrying (21)...

W 20:15:47 Retry Failed - Reason: Invalid Address For Write

W 20:15:47 Retrying (22)...

W 20:15:47 Retry Failed - Reason: Invalid Address For Write

W 20:15:47 Retrying (23)...

W 20:15:47 Retry Failed - Reason: Invalid Address For Write

W 20:15:47 Retrying (24)...

W 20:15:47 Retry Failed - Reason: Invalid Address For Write

W 20:15:48 Retrying (25)...

W 20:15:48 Retry Failed - Reason: Invalid Address For Write

W 20:15:48 Retrying (26)...

W 20:15:48 Retry Failed - Reason: Invalid Address For Write

W 20:15:48 Retrying (27)...

W 20:15:48 Retry Failed - Reason: Invalid Address For Write

W 20:15:48 Retrying (28)...

W 20:15:48 Retry Failed - Reason: Invalid Address For Write

W 20:15:48 Retrying (29)...

W 20:15:48 Retry Failed - Reason: Invalid Address For Write

W 20:15:48 Retrying (30)...

W 20:15:48 Retry Failed - Reason: Invalid Address For Write

W 20:15:49 Retrying (31)...

W 20:15:49 Retry Failed - Reason: Invalid Address For Write

W 20:15:49 Retrying (32)...

W 20:15:49 Retry Failed - Reason: Invalid Address For Write

W 20:15:49 Retrying (33)...

W 20:15:49 Retry Failed - Reason: Invalid Address For Write

W 20:15:50 Retrying (34)...

W 20:15:50 Retry Failed - Reason: Invalid Address For Write

W 20:15:50 Retrying (35)...

W 20:15:50 Retry Failed - Reason: Invalid Address For Write

W 20:15:50 Retrying (36)...

W 20:15:50 Retry Failed - Reason: Invalid Address For Write

W 20:15:51 Retrying (37)...

W 20:15:51 Retry Failed - Reason: Invalid Address For Write

W 20:15:51 Retrying (38)...

W 20:15:51 Retry Failed - Reason: Invalid Address For Write

W 20:15:51 Retrying (39)...

W 20:15:51 Retry Failed - Reason: Invalid Address For Write

W 20:15:52 Retrying (40)...

W 20:15:52 Retry Failed - Reason: Invalid Address For Write

W 20:15:52 Retrying (41)...

W 20:15:52 Retry Failed - Reason: Invalid Address For Write

W 20:15:52 Retrying (42)...

W 20:15:52 Retry Failed - Reason: Invalid Address For Write

W 20:15:52 Retrying (43)...

W 20:15:52 Retry Failed - Reason: Invalid Address For Write

W 20:15:52 Retrying (44)...

W 20:15:52 Retry Failed - Reason: Invalid Address For Write

W 20:15:52 Retrying (45)...

W 20:15:52 Retry Failed - Reason: Invalid Address For Write

W 20:15:53 Retrying (46)...

W 20:15:53 Retry Failed - Reason: Invalid Address For Write

W 20:15:53 Retrying (47)...

W 20:15:53 Retry Failed - Reason: Invalid Address For Write

E 20:20:14 Failed to Write Sectors 1803616 - 1803647 - Reason: Write Error

E 20:20:14 Next Writable Address: 1802944

I 20:20:15 Synchronising Cache...

W 20:20:17 User opted to skip the 'Close Track/Session/Disc' functions.

E 20:20:17 Failed to Write Image!

I 20:20:17 Exporting Graph Data...

I 20:20:17 Graph Data File: C:\Users\Dylan\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_DVD+-RW_TS-L633C_DW50_OCTOBER-02-12_7-41_PM_MKM-001-00_MAX.ibg

I 20:20:17 Export Successfully Completed!

E 20:20:17 Operation Failed! - Duration: 00:39:14

I 20:20:17 Average Write Rate: 2,339 KB/s (1.7x) - Maximum Write Rate: 3,430 KB/s (2.5x)

Edited by Thaepicasian
Link to comment
Share on other sites

Try writing the XGD2 title at 2.4x or 4x speed

Thank you for the suggestion, but alas, I do not have that choice.

 

Your drive is having trouble writing to the discs and is reporting a 'Write Error' when it attempts to do so.

 

Try another spindle of discs.

Try cleaning the drive with a cleaning disc.

If all else fails, use/buy another drive.

 

I will try cleaning my drive and burn again (If it fails, I will post again with the error dialogue). My budget is small, so I would like to keep purchasing other items as a last resort.

I would like to clarify something though.

Every time I tried, the burn would stop dead at exactly 47%.

This thought is based off my extremely limited knowledge, but I don't believe problems such as an unclean drive would be so exact.

Are there any technical problems that I must address?

If anyone has any other solutions while I attempt burning the disc again, I would be grateful if you took the time to suggest it.

Thanks.

Link to comment
Share on other sites

It's not what you're burning that's the problem here, so changing that doesn't make any difference.

 

You need to test with different discs (that's what I meant by supplies/media). Some other Verbatim 2.4x MKM-001-00's would do... or even some Verbatim 8x MKM-003-00's. The ones made in Singapore seem to be the best - check the label on the tub.

Link to comment
Share on other sites

Although I never checked before, it seems I do have the ones made in Singapore.

Also, I'm sorry that I'm giving info bit by bit, but my CD Drive isn't the newest firmware according to the site that Imgburn connects to.

When I try to update though, the updater says that it can't find the F/W, which I think is firmware, but I'm really not sure.

Would that be a problem?

 

Sorry, my bad. It says that it can't find the suitable drive for the F/W.

Edited by Thaepicasian
Link to comment
Share on other sites

Another thing! I just realized this now, but when I burn, I use a program called "GameBooster" while burning to speed up my computer.

Basically, it shuts down unnecessary services/processes for gaming, but it works fine for general use too.

Do you think that could be the problem?

Link to comment
Share on other sites

You can't just go by the dates of the firmware on Firmware HQ... at least not if you've got a slimline drive in a laptop. Different manufacturers have different firmware version naming schemes. Yours is DW50, so the next would probably be DW60 or something - whereas the newest one listed on Firmware HQ is totally different.

 

No, GameBooster isn't the problem.

Link to comment
Share on other sites

*Sigh* Another fail. This time though, I got the error text!

 

Device: [0:0:0] TSSTcorp DVD+-RW TS-L633C Dw50 (D:) (SATA)

 

ScsiStatus: 0x02

Interpretation: Check Condition

 

CDB: 2A 00 00 1B85 60 00 00 20 00

Interpretation: Write (10) - Sectors: 1803616 - 1803647

 

Sense Area: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00 00 00

SK InterpretationL Medium Error

ASC/ASCQ Interpretation: Write Error

 

I would also like to note that when 47% came around, it stopped burning and make a weird clicking noise.

Then, when the error came up, my computers fan went into overdrive.

I'm not entirely sure if that's normal.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.