Thodoris Posted October 26, 2012 Share Posted October 26, 2012 Hi , i am not experienced in BDR burnings and this was the first time i got such a problem. i didnt anything different than my other successful burnings ... i saw similar posts from the past about this problem but i think its better to ask about my personal case ... i use JVC-Taiyo BDRs , till now without any problem. this is the log : ----------------------------------------------------------------------------------------------------------------------------- 07:41:37 ImgBurn Version 2.5.6.0 started! I 07:41:37 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 07:41:37 Total Physical Memory: 3,136,084 KB - Available: 2,703,848 KB I 07:41:37 Initialising SPTI... I 07:41:37 Searching for SCSI / ATAPI devices... I 07:41:37 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS38 1.00-A2 (G:) (ATA) I 07:41:37 -> Drive 2 - Info: TSSTcorp CDDVDW SH-222AB SB00 (D:) (ATA) I 07:41:37 Found 1 DVD±RW/RAM and 1 BD-RE! I 07:43:28 Operation Started! I 07:43:28 Building Image Tree... I 07:43:28 Calculating Totals... I 07:43:28 Preparing Image... I 07:43:29 Contents: 1,044 Files, 107 Folders I 07:43:29 Content Type: Data I 07:43:29 Data Type: MODE1/2048 I 07:43:29 File System(s): UDF (1.02) I 07:43:29 Volume Label: FRJBR015 I 07:43:29 Size: 23,949,037,318 bytes I 07:43:29 Sectors: 11,694,420 I 07:43:29 Image Size: 23,953,342,464 bytes I 07:43:29 Image Sectors: 11,695,968 I 07:43:38 Operation Successfully Completed! - Duration: 00:00:10 I 07:43:38 Operation Started! I 07:43:38 Source File: -==/\/[bUILD IMAGE]\/\==- I 07:43:38 Source File Sectors: 11,695,968 (MODE1/2048) I 07:43:38 Source File Size: 23,953,342,464 bytes I 07:43:38 Source File Volume Identifier: FRJBR015 I 07:43:38 Source File Volume Set Identifier: 415A3D6500B27756 I 07:43:38 Source File Application Identifier: ImgBurn v2.5.6.0 I 07:43:38 Source File Implementation Identifier: ImgBurn I 07:43:38 Source File File System(s): UDF (1.02) I 07:43:38 Destination Device: [0:1:0] HL-DT-ST BD-RE BH10LS38 1.00 (G:) (ATA) I 07:43:38 Destination Media Type: BD-R (Disc ID: TYG-BD-Y03-001) I 07:43:38 Destination Media Supported Write Speeds: 2x, 4x I 07:43:38 Destination Media Sectors: 12,219,392 I 07:43:38 Write Mode: BD I 07:43:38 Write Type: DAO I 07:43:38 Write Speed: 2x I 07:43:38 BD-R Verify Not Required: Yes I 07:43:38 Link Size: Auto I 07:43:38 Lock Volume: Yes I 07:43:38 Test Mode: No I 07:43:38 OPC: No I 07:43:38 BURN-Proof: Enabled I 07:43:38 Write Speed Successfully Set! - Effective: 8,991 KB/s (2x) I 07:43:53 Filling Buffer... (40 MB) I 07:43:54 Writing LeadIn... I 07:43:55 Writing Session 1 of 1... (1 Track, LBA: 0 - 11695967) I 07:43:55 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11695967) I 08:28:27 Synchronising Cache... I 08:28:34 Closing Track... I 08:28:35 Finalising Disc... W 08:28:41 Finalise Disc Failed! - Reason: Cannot Write Medium - Incompatible Format W 08:28:41 Retrying (1 of 3)... W 08:28:41 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 08:28:41 Retrying (2 of 3)... W 08:28:41 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 08:28:41 Retrying (3 of 3)... W 08:28:41 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 08:31:26 Retrying (4)... W 08:31:26 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 08:31:27 Retrying (5)... W 08:31:27 Retry Failed - Reason: Cannot Write Medium - Incompatible Format I 08:31:29 Exporting Graph Data... I 08:31:29 Graph Data File: C:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS38_1.00_FRIDAY-OCTOBER-26-2012_7-43_AM_TYG-BD-Y03-001_2x.ibg I 08:31:29 Export Successfully Completed! I 08:31:29 Operation Successfully Completed! - Duration: 00:47:50 I 08:31:29 Average Write Rate: 8,754 KB/s (1.9x) - Maximum Write Rate: 9,137 KB/s (2.0x) I 08:31:29 Cycling Tray before Verify... W 08:31:38 Waiting for device to become ready... W 08:31:52 Device Not Ready - Unable to Recover TOC W 08:31:52 Retrying (1 of 3)... I 08:31:52 Cycling Tray before Verify... W 08:32:01 Waiting for device to become ready... W 08:32:16 Retry Failed - Reason: Unable to Recover TOC W 08:32:16 Retrying (2 of 3)... I 08:32:16 Cycling Tray before Verify... W 08:32:25 Waiting for device to become ready... W 08:32:39 Retry Failed - Reason: Unable to Recover TOC W 08:32:39 Retrying (3 of 3)... I 08:32:39 Cycling Tray before Verify... W 08:32:48 Waiting for device to become ready... I 08:32:49 Abort Request Acknowledged E 08:32:49 Device Not Ready - Reason: Logical Unit is in process of becoming ready E 08:32:49 Operation Aborted! I 08:33:12 Close Request Acknowledged I 08:33:12 Closing Down... I 08:33:12 Shutting down SPTI... I 08:33:12 ImgBurn closed! ----------------------------------------------------------------------------------------------------------------------------- u think this is an occasional "normal" problem on finalizing or something i have to change ? any opinions ? thanx. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 26, 2012 Share Posted October 26, 2012 Firstly, update ImgBurn. Then you should update the firmware on your drive. http://www.firmwarehq.com/LG/BH10LS38/files.html I believe the discs you're using are the cheaper LTH type rather than the traditional HTL ones. Drives do have more of a problem burning those. You may also find the drive does a better job if you burn at 4x rather than 2x. Link to comment Share on other sites More sharing options...
Thodoris Posted October 26, 2012 Author Share Posted October 26, 2012 thanks a lot for your advices Link to comment Share on other sites More sharing options...
Recommended Posts