hencon Posted June 12, 2013 Share Posted June 12, 2013 I created a bootable Windows 7, 64 bit, premium home edition, disk from ImgBurn which is a fantastic program and ImgBurn performed flawlessly and made a good, bootable DVD. However, when I powered off my wife's laptop, inserted the disk, powered it back on, I got one of two things that would occur: 1. A black screen with a white "dash" flashing in the upper left corner or 2. a message on a black screen that reads "BootMgr missing","Press Ctl,Alt,Del to restart". The "BootMgr" message is the reason I downloaded ImgBurn and made the DVD and was a re-occuring problem! Any Ideas? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 12, 2013 Share Posted June 12, 2013 Post the log of you making the disc/image please. Is the boot priority set correctly on your wife's laptop? Link to comment Share on other sites More sharing options...
hencon Posted June 12, 2013 Author Share Posted June 12, 2013 (edited) ImgBurn.logYes! It is set to boot from cd/dvd as the first setting. I'm very new to this forum stuff and I don't know how to post the log on here! Please advise me if you can! Thank you! hencon Edited June 13, 2013 by hencon Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 13, 2013 Share Posted June 13, 2013 The image/disc you burnt here should be working fine if it's an original MS image. ; //****************************************\\; ImgBurn Version 2.5.7.0 - Log; Wednesday, 12 June 2013, 00:20:15; \\****************************************//;;I 23:15:32 ImgBurn Version 2.5.7.0 started!I 23:15:32 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)I 23:15:32 Total Physical Memory: 522,776 KB - Available: 215,900 KBI 23:15:32 Initialising SPTI...I 23:15:32 Searching for SCSI / ATAPI devices...I 23:15:42 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH22LP21 1.00-10 (D:) (ATA)I 23:15:44 -> Drive 2 - Info: HL-DT-ST DVD-ROM GDR8161B 0040-0B (E:) (ATA)I 23:15:44 Found 1 DVD-ROM and 1 DVD±RW/RAM!I 23:19:10 Operation Started!I 23:19:10 Source File: C:\Documents and Settings\Henry\My Documents\x17-58997.isoI 23:19:10 Source File Sectors: 1,621,535 (MODE1/2048)I 23:19:10 Source File Size: 3,320,903,680 bytesI 23:19:10 Source File Volume Identifier: GSP1RMCHPXFRER_EN_DVDI 23:19:10 Source File Volume Set Identifier: 7263a500MS UDFBridgeI 23:19:10 Source File Application Identifier: CDIMAGE 2.54 (01/01/2005 TM)I 23:19:10 Source File Implementation Identifier: Microsoft CDIMAGE UDFI 23:19:10 Source File File System(s): ISO9660 (Bootable), UDF (1.02)I 23:19:10 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GH22LP21 1.00 (D:) (ATA)I 23:19:10 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00)I 23:19:10 Destination Media Supported Write Speeds: 4x, 8x, 12x, 16xI 23:19:10 Destination Media Sectors: 2,295,104I 23:19:10 Write Mode: DVDI 23:19:10 Write Type: DAOI 23:19:10 Write Speed: MAXI 23:19:10 DVD+R Reserve Track: NoI 23:19:10 Link Size: AutoI 23:19:10 Lock Volume: YesI 23:19:10 Test Mode: NoI 23:19:10 OPC: NoI 23:19:10 BURN-Proof: EnabledI 23:19:11 Write Speed Successfully Set! - Effective: 22,160 KB/s (16x)I 23:19:11 Book Type Setting: DVD-ROMI 23:19:11 Filling Buffer... (20 MB)I 23:19:19 Writing LeadIn...I 23:19:40 Writing Session 1 of 1... (1 Track, LBA: 0 - 1621534)I 23:19:40 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1621534)I 23:52:28 Synchronising Cache...I 23:52:41 Closing Track...I 23:52:43 Finalising Disc...I 23:52:57 Exporting Graph Data...I 23:52:57 Graph Data File: C:\Documents and Settings\Henry\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GH22LP21_1.00_TUESDAY-JUNE-11-2013_11-19_PM_CMC_MAG-M01-00_MAX.ibgI 23:52:57 Export Successfully Completed!I 23:52:57 Operation Successfully Completed! - Duration: 00:33:47I 23:52:57 Average Write Rate: 1,648 KB/s (1.2x) - Maximum Write Rate: 4,409 KB/s (3.2x)I 23:52:57 Cycling Tray before Verify...W 23:53:07 Waiting for device to become ready...I 23:53:19 Device Ready!I 23:53:22 Operation Started!I 23:53:22 Source Device: [1:0:0] HL-DT-ST DVD-RAM GH22LP21 1.00 (D:) (ATA)I 23:53:22 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: CMC MAG-M01-00)I 23:53:22 Source Media Supported Write Speeds: 4x, 8x, 12x, 16xI 23:53:22 Image File: C:\Documents and Settings\Henry\My Documents\x17-58997.isoI 23:53:22 Image File Sectors: 1,621,535 (MODE1/2048)I 23:53:22 Image File Size: 3,320,903,680 bytesI 23:53:22 Image File Volume Identifier: GSP1RMCHPXFRER_EN_DVDI 23:53:22 Image File Volume Set Identifier: 7263a500MS UDFBridgeI 23:53:22 Image File Application Identifier: CDIMAGE 2.54 (01/01/2005 TM)I 23:53:22 Image File Implementation Identifier: Microsoft CDIMAGE UDFI 23:53:22 Image File File System(s): ISO9660 (Bootable), UDF (1.02)I 23:53:22 Read Speed (Data/Audio): MAX / MAXI 23:53:24 Verifying Session 1 of 1... (1 Track, LBA: 0 - 1621534)I 23:53:24 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 1621534)I 00:18:40 Exporting Graph Data...I 00:18:40 Graph Data File: C:\Documents and Settings\Henry\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GH22LP21_1.00_TUESDAY-JUNE-11-2013_11-19_PM_CMC_MAG-M01-00_MAX.ibgI 00:18:40 Export Successfully Completed!I 00:18:40 Operation Successfully Completed! - Duration: 00:25:16I 00:18:40 Average Verify Rate: 2,142 KB/s (1.5x) - Maximum Verify Rate: 3,919 KB/s (2.8x)I 00:20:14 Close Request AcknowledgedI 00:20:14 Closing Down...I 00:20:15 Shutting down SPTI...I 00:20:15 ImgBurn closed! You might like to slow the write speed down to 8x and reset the OS's DMA settings though (there's an option in the Tools menu) because your machine isn't running properly at the moment - it's very slow are reading and writing discs. Link to comment Share on other sites More sharing options...
hencon Posted June 13, 2013 Author Share Posted June 13, 2013 O.K. The laptop accepted the disk, installed everything beautifully and when I got to the point of entering "User Name" and "computer name" to finish the installation, the only thing I could enter into those areas were a series of "0" (zeros) and that was by using the "backspace" key, or sometimes the "Z" key, but i could not enter any other characters, thus stopping me from finishing the process that was, otherwise, flawless! I've tried everything to just get one different character into the "computer name" line so it doesn't match the username but all I can enter are these little narrow zeros! I don't know of any work-around to get past the username and computer name impasse that I am at! Thank You Very Much!!!! Link to comment Share on other sites More sharing options...
Recommended Posts