Jump to content
Sign in to follow this  
bergstenlind

Verify Fail

Recommended Posts

Hi!

 

Need help to understand what it is that's going wrong. Here is a withdraw from the imgburn log:

 

I 21:00:22 ImgBurn Version 2.5.7.0 started!
I 21:00:22 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
I 21:00:22 Total Physical Memory: 4 127 516 KB  -  Available: 1 247 496 KB
I 21:00:22 Initialising SPTI...
I 21:00:22 Searching for SCSI / ATAPI devices...
I 21:00:32 -> Drive 1 - Info: TSSTcorp CDDVDW TS-L633C AC01 (D:) (ATAPI)
I 21:00:32 Found 1 DVD±RW/RAM!
W 21:02:14 User accepted disc space warning and is attempting to truncate!
I 21:02:14 Operation Started!
I 21:02:14 Source File: C:\Users\Simon\Desktop\Assassins.Creed.IV.Black.Flag.XBOX360-COMPLEX\DVD1\complex-ac4.bf.d1.dvd
I 21:02:14 Source File Sectors: 4 267 015 (MODE1/2048)
I 21:02:14 Source File Size: 8 738 846 720 bytes
I 21:02:14 Source File Volume Identifier: DVD_ROM
I 21:02:14 Source File Volume Set Identifier: 4930000
I 21:02:14 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 21:02:14 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 21:02:14 Source File File System(s): ISO9660; UDF (1.50)
I 21:02:14 Destination Device: [0:1:0] TSSTcorp CDDVDW TS-L633C AC01 (D:) (ATAPI)
I 21:02:14 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 21:02:14 Destination Media Supported Write Speeds: 3x; 4x; 6x
I 21:02:14 Destination Media Sectors: 4 173 824
I 21:02:14 Write Mode: DVD
I 21:02:14 Write Type: DAO
I 21:02:14 Write Speed: 2,4x
I 21:02:14 DVD+R DL Reserve Track: No
I 21:02:14 Link Size: Auto
I 21:02:14 Lock Volume: Yes
I 21:02:14 Test Mode: No
I 21:02:14 OPC: No
I 21:02:14 BURN-Proof: Enabled
W 21:02:16 Write Speed Miscompare! - Wanted: 3 324 KB/s (2,4x), Got: 4 155 KB/s (3x)
W 21:02:16 The drive only supports writing these discs at 3x; 4x; 6x.
I 21:02:16 Book Type Setting: DVD-ROM
W 21:02:16 Optimal layer break position exceeds L0 capacity.
W 21:02:16 Optimal L0 Sectors: 2 133 520
W 21:02:16 Maximum L0 Sectors: 2 086 912
I 21:02:16 Optimal L0 Data Zone Capacity: 2 133 520
I 21:02:16 Optimal L0 Data Zone Method: Copied From Original Disc
W 21:02:16 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List
I 21:02:20 Filling Buffer... (80 MB)
I 21:02:25 Writing LeadIn...
I 21:02:52 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 21:02:52 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 21:02:52 Writing Layer 0... (LBA: 0 - 2086911)
I 21:19:56 Writing Layer 1... (LBA: 2086912 - 4267014)
I 21:38:13 Synchronising Cache...
I 21:38:40 Closing Track...
I 21:38:41 Finalising Disc...
I 21:39:42 Exporting Graph Data...
I 21:39:43 Graph Data File: C:\Users\Simon\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_TS-L633C_AC01_DEN-17-MARS-2014_21-02_MKM-003-00_2,4x.ibg
I 21:39:43 Export Successfully Completed!
I 21:39:43 Operation Successfully Completed! - Duration: 00:37:28
I 21:39:43 Average Write Rate: 3 937 KB/s (2.8x) - Maximum Write Rate: 4 235 KB/s (3.1x)
I 21:39:43 Cycling Tray before Verify...
W 21:39:59 Waiting for device to become ready...
I 21:40:14 Device Ready!
E 21:40:14 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0)
E 21:40:14 Verify Failed! - Reason: Layouts do not match.
 

Share this post


Link to post
Share on other sites

It looks like your drive did a bad job of burning the disc. Have you tried burning at 4x or 6x rather than 3x? (Notice 2.4x isn't even an option for your drive/firmware/media combo)

 

Put that disc back in the drive, load the program and put it back into 'Write' mode. Then copy + paste all of the disc info from the box on the right please.

Share this post


Link to post
Share on other sites

No point trying to verify a truncated XGD3 image, cause the file layerbreak and the disk layerbreak won't match.

Share this post


Link to post
Share on other sites

It looks like your drive did a bad job of burning the disc. Have you tried burning at 4x or 6x rather than 3x? (Notice 2.4x isn't even an option for your drive/firmware/media combo)

 

Put that disc back in the drive, load the program and put it back into 'Write' mode. Then copy + paste all of the disc info from the box on the right please.

Thanks for answering so quickly! All this is pretty new for me.

 

TSSTcorp CDDVDW TS-L633C AC01 (ATAPI)
Current Profile: DVD+R DL
 
Disc Information:
Status: Empty
State of Last Session: Empty
Erasable: No
Free Sectors: 4 173 824
Free Space: 8 547 991 552 bytes
Free Time: 927:32:74 (MM:SS:FF)
Next Writable Address: 0
MID: MKM-003-00
Supported Write Speeds: 3x; 4x; 6x
 
DVD±R DL Boundary Information:
L0 Data Zone Capacity: 2 086 912
Changeable: Yes
 
Physical Format Information (ADIP - L0):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196 608
Last Physical Sector of Data Area: 16 580 607
Last Physical Sector in Layer 0: 2 283 519
 
Physical Format Information (ADIP - L1):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196 608
Last Physical Sector of Data Area: 16 580 607
Last Physical Sector in Layer 0: 2 283 519
 
Physical Format Information (Last Recorded - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196 608
Last Physical Sector of Data Area: 16 580 607
Last Physical Sector in Layer 0: 2 283 519
 
Physical Format Information (Last Recorded - L1):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196 608
Last Physical Sector of Data Area: 16 580 607
Last Physical Sector in Layer 0: 2 283 519
 
Performance (Write Speed):
Descriptor 1...
-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 11 080 KB/s (8x) - WS: 4 155 KB/s (3x)
Descriptor 2...
-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 11 080 KB/s (8x) - WS: 5 540 KB/s (4x)
Descriptor 3...
-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 11 080 KB/s (8x) - WS: 8 310 KB/s (6x)

Share this post


Link to post
Share on other sites

Thanks, I just wanted to double check the drive still sees the disc (it supposedly burnt) as still being blank... and it does.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.