kaasaanfiets Posted April 22, 2014 Share Posted April 22, 2014 (edited) I can't burn XGD3 games at 45% i got this error: I/O Error! Device: [0:0:0] TSSTcorp CDDVDW TS-H653N HB01 (E:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 1A 82 C0 00 00 20 00 Interpretation: Write (10) - Sectors: 1737408 - 1737439 Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 00 00 SK Interpretation: Illegal Request ASC/ASCQ interpretation: Invalid Adress For Write Im using ARITA DVD+R DL 8X disks. BurnerMax IS working my burner is detected and IMGburn says 8,7GB LOG: I 19:46:29 ImgBurn Version 2.5.8.0 started! I 19:46:29 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 19:46:29 Total Physical Memory: 8,337,540 KiB - Available: 6,992,348 KiB W 19:46:29 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 19:46:29 Initialising SPTI... I 19:46:29 Searching for SCSI / ATAPI devices... I 19:46:29 -> Drive 1 - Info: DTSOFT BDROM 1.05 (G:) (Virtual) I 19:46:29 -> Drive 2 - Info: TSSTcorp CDDVDW TS-H653N HB01 (E:) (ATA) I 19:46:29 Found 1 DVD±RW/RAM and 1 BD-ROM! I 19:47:46 Operation Started! I 19:47:46 Source File: D:\GAMES\360\Splinter Cell Conviction (RF) XBOX360\Splinter Cell Conviction (RF) XBOX360\Splinter Cell Conviction XBOX360.dvd I 19:47:46 Source File Sectors: 3,827,488 (MODE1/2048) I 19:47:46 Source File Size: 7,838,695,424 bytes I 19:47:46 Source File Volume Identifier: DVD_ROM I 19:47:46 Source File Volume Set Identifier: ec67c000MS UDFBridge I 19:47:46 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 19:47:46 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 19:47:46 Source File File System(s): ISO9660, UDF (1.50) I 19:47:46 Destination Device: [0:0:0] TSSTcorp CDDVDW TS-H653N HB01 (E:) (ATA) I 19:47:46 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) I 19:47:46 Destination Media Supported Write Speeds: 4x, 6x, 8x I 19:47:46 Destination Media Sectors: 4,267,040 I 19:47:46 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes) I 19:47:46 Write Mode: DVD I 19:47:46 Write Type: DAO I 19:47:46 Write Speed: 2.4x I 19:47:46 DVD+R DL Reserve Track: No I 19:47:46 Link Size: Auto I 19:47:46 Lock Volume: Yes I 19:47:46 Test Mode: No I 19:47:46 OPC: No I 19:47:46 BURN-Proof: Enabled W 19:47:46 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x) W 19:47:46 The drive only supports writing these discs at 4x, 6x, 8x. I 19:47:46 Book Type Setting: DVD-ROM I 19:47:46 Optimal L0 Data Zone Capacity: 1,913,760 I 19:47:46 Optimal L0 Data Zone Method: Copied From Original Disc I 19:48:27 Set L0 Data Zone Capacity Succeeded! I 19:48:27 L0 Data Zone Capacity - Effective: 1,913,760 I 19:48:28 Filling Buffer... (80 MiB) I 19:48:29 Writing LeadIn... I 19:48:31 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 19:48:31 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 19:48:31 Writing Layer 0... (LBA: 0 - 1913759) W 20:00:37 Failed to Write Sectors 1737408 - 1737439 - Reason: Write Error W 20:00:37 Retrying (1 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (2 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (3 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (4 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (5 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (6 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (7 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (8 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (9 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (10 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (11 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (12 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (13 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (14 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (15 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (16 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (17 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (18 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (19 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:00:37 Retrying (20 of 20)... W 20:00:37 Retry Failed - Reason: Invalid Address For Write W 20:10:29 Retrying (21)... W 20:10:29 Retry Failed - Reason: Invalid Address For Write W 20:10:30 Retrying (22)... W 20:10:30 Retry Failed - Reason: Invalid Address For Write Edited April 22, 2014 by kaasaanfiets Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 23, 2014 Share Posted April 23, 2014 The first error is the important one and your drive returned a 'write error'. So it ran into an issue burning to the discs you're using. I doubt your drive can actually overburn double layer discs successfully (burnermax being enabled ok means nothing) and there's even less chance of it working if you keep using the discs you're using. Everywhere tells you to use Verbatim MKM-003-00 ones. Link to comment Share on other sites More sharing options...
kaasaanfiets Posted May 2, 2014 Author Share Posted May 2, 2014 The first error is the important one and your drive returned a 'write error'. So it ran into an issue burning to the discs you're using. I doubt your drive can actually overburn double layer discs successfully (burnermax being enabled ok means nothing) and there's even less chance of it working if you keep using the discs you're using. Everywhere tells you to use Verbatim MKM-003-00 ones. ok i will try the verbatims. But is it something technical? that my burner does not burn to the edge of the disk? why is it that the Ihas burners can do this but mine can't? Does my burning arm with the laser reach all the way to the end? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted May 2, 2014 Share Posted May 2, 2014 The Lite-On drives only really work properly with a specific setting (drive setting, not program setting) enabled. Samsung drives don't have that setting and just don't work. Buy a Lite-On or the Optiarc 5280-CB Plus/Robot drive. Link to comment Share on other sites More sharing options...
Recommended Posts