Jump to content
jorgk3

Problem with noncompliant CUE sheets

Recommended Posts

Hi,

 

according to http://forum.imgburn.com/index.php?/topic/20311-basic-questions-about-imgburn-capabilites/ ImgBurn can handle noncompliant CUE sheets.

 

However, I recently burned two coasters from the attached CUE sheet. Using the CD burned with the first sheet in a normal CD player, tracks after track 3 can't be found by the player. In the second sheet, the problem occurs after track 1.

 

Could someone please taka a look.

 

Thank you!!

In Two Minds.FLAC-noncompliant.cue

FLAC - Noncompliant.cue

Share this post


Link to post
Share on other sites

Try playing the disc in your PC... I'd assume it's ok.

 

If your standalone can't play it, it's probably due to the discs you're using / the drive that burnt it / the speed you burnt it at.

 

Update the firmware on your burner.

 

http://www.firmwarehq.com/LG/GH24NS95/files.html

 

Buy some Taiyo Yuden CDs.

 

Burn at 16x or 24x rather than 'MAX'.

Share this post


Link to post
Share on other sites

I tried one of the CDs on the PC. They play OK with VLC.

 

The disks also play OK on the standalones, I tried two devices. The problem is that the standalones can't go directly to the tracks with higher numbers as described in the original post.

 

So I don't think it's a problem of the media, it seems to be a problem of the disk's table of content.

Share this post


Link to post
Share on other sites

it seems to be a problem of the disk's table of content.

It isn't, the drive just can't read the disc properly.

 

Please try what I suggested above, there's nothing for me to fix here.

Share this post


Link to post
Share on other sites

×

Important Information

By using this site, you agree to our Terms of Use.