Jump to content

Expert advice needed on making writing to DVD-R a success ( stuck at Writing Lead-In )


izanami

Recommended Posts

Hi everyone, let me start off by saying how lucky I am to have finally registered on here ( I hadn't been able to fill out the registration form because the CAPTCHA thing wouldn't show up despite having Silverlight, Flash, Shockwave Player and Java installed and up to date including the correct content settings ).

 

At any rate, here's my issue as it stands:

I 09:13:29 ImgBurn Version 2.5.8.0 started!
I 09:13:29 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
I 09:13:29 Total Physical Memory: 6.200.456 KiB  -  Available: 2.964.900 KiB
I 09:13:29 Initialising SPTI...
I 09:13:29 Searching for SCSI / ATAPI devices...
I 09:13:30 -> Drive 1 - Info: TSSTcorp DVDWBD TS-LB23D SC02 (E:) (ATA)
I 09:13:30 Found 1 BD-ROM/DVD±RW!
I 09:14:29 Operation Started!
I 09:14:29 Source File: D:\Roko\mystuff.MDS
I 09:14:29 Source File Sectors: 1.555.712 (MODE1/2048)
I 09:14:29 Source File Size: 3.186.098.176 bytes
I 09:14:29 Source File Volume Set Identifier: 1=641153SCEI
I 09:14:29 Source File Application Identifier: PLAYSTATION
I 09:14:29 Source File Implementation Identifier: DVD-ROM GENERATOR
I 09:14:29 Source File File System(s): ISO9660; UDF (1.02)
I 09:14:29 Destination Device: [1:0:0] TSSTcorp DVDWBD TS-LB23D SC02 (E:) (ATA)
I 09:14:29 Destination Media Type: DVD-R (Disc ID: MBI 01RG40)
I 09:14:29 Destination Media Supported Write Speeds: 3,3x; 4x; 6x; 8x
I 09:14:29 Destination Media Sectors: 2.297.888
I 09:14:29 Write Mode: DVD
I 09:14:29 Write Type: Incremental
I 09:14:29 Write Speed: 4x
I 09:14:29 Link Size: Auto
I 09:14:29 Lock Volume: Yes
I 09:14:29 Test Mode: No
I 09:14:29 OPC: No
I 09:14:29 BURN-Proof: Enabled
I 09:14:29 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x)
I 09:14:30 Filling Buffer... (80 MiB)
I 09:14:31 Writing LeadIn...
W 09:23:09 Failed to Write Sectors 128 - 159 - Reason: Program Memory Area Update Failure
W 09:23:09 Retrying (1 of 20)...
W 09:23:09 Retry Failed - Reason: Invalid Address For Write
W 09:23:09 Retrying (2 of 20)...
W 09:23:09 Retry Failed - Reason: Invalid Address For Write
W 09:23:09 Retrying (3 of 20)...
W 09:23:09 Retry Failed - Reason: Invalid Address For Write
W 09:23:09 Retrying (4 of 20)...
W 09:23:09 Retry Failed - Reason: Invalid Address For Write
W 09:23:09 Retrying (5 of 20)...
W 09:23:09 Retry Failed - Reason: Invalid Address For Write
W 09:23:09 Retrying (6 of 20)...
W 09:23:09 Retry Failed - Reason: Invalid Address For Write
W 09:23:09 Retrying (7 of 20)...
W 09:23:09 Retry Failed - Reason: Invalid Address For Write
W 09:23:09 Retrying (8 of 20)...
W 09:23:09 Retry Failed - Reason: Invalid Address For Write
W 09:23:09 Retrying (9 of 20)...
W 09:23:09 Retry Failed - Reason: Invalid Address For Write
W 09:23:09 Retrying (10 of 20)...
W 09:23:09 Retry Failed - Reason: Invalid Address For Write
W 09:23:09 Retrying (11 of 20)...
W 09:23:09 Retry Failed - Reason: Invalid Address For Write
W 09:23:09 Retrying (12 of 20)...
W 09:23:10 Retry Failed - Reason: Invalid Address For Write
W 09:23:10 Retrying (13 of 20)...
W 09:23:10 Retry Failed - Reason: Invalid Address For Write
W 09:23:10 Retrying (14 of 20)...
W 09:23:10 Retry Failed - Reason: Invalid Address For Write
W 09:23:10 Retrying (15 of 20)...
W 09:23:10 Retry Failed - Reason: Invalid Address For Write
W 09:23:10 Retrying (16 of 20)...
W 09:23:10 Retry Failed - Reason: Invalid Address For Write
W 09:23:10 Retrying (17 of 20)...
W 09:23:10 Retry Failed - Reason: Invalid Address For Write
W 09:23:10 Retrying (18 of 20)...
W 09:23:10 Retry Failed - Reason: Invalid Address For Write
W 09:23:10 Retrying (19 of 20)...
W 09:23:10 Retry Failed - Reason: Invalid Address For Write
W 09:23:10 Retrying (20 of 20)...
W 09:23:10 Retry Failed - Reason: Invalid Address For Write
E 09:23:14 Failed to Write Sectors 128 - 159 - Reason: Program Memory Area Update Failure
E 09:23:14 Next Writable Address: 144
I 09:23:14 Synchronising Cache...
W 09:23:17 User opted to skip the 'Close Track/Session/Disc' functions.
E 09:23:17 Failed to Write Image!
E 09:23:17 Operation Failed! - Duration: 00:08:47
I 09:23:17 Average Write Rate: 0 KiB/s (0.0x) - Maximum Write Rate: 0 KiB/s (0.0x)

Basically, getting stuck writing the lead-in over and over again.

 

Just one of the numerous logs pointing to inexplicable errors that persist no matter what I try... and this is what I have tried so far:

 

- deleting other applications' drivers that were interfering 

- updating Intel chipset drivers

- updating BD-ROM drive's firmware

- running ImgBurn as administrator

- running ImgBurn in safe mode

- changing write method to Incremental 

- experimenting with various write speeds

- enabling Optimum Power Calibration

 

Out of many attempts to write to a DVD-R, I have only ever had one successful burn... or partially successful perhaps ( the disc worked up until a certain point ):

I 17:21:30 Operation Started!
I 17:21:30 Source File: D:\Roko\mystuff.MDS
I 17:21:30 Source File Sectors: 1.555.712 (MODE1/2048)
I 17:21:30 Source File Size: 3.186.098.176 bytes
I 17:21:31 Source File Volume Set Identifier: 1=641153SCEI
I 17:21:31 Source File Application Identifier: PLAYSTATION
I 17:21:31 Source File Implementation Identifier: DVD-ROM GENERATOR
I 17:21:31 Source File File System(s): ISO9660; UDF (1.02)
I 17:21:31 Destination Device: [1:0:0] TSSTcorp DVDWBD TS-LB23D SC02 (E:) (ATA)
I 17:21:31 Destination Media Type: DVD-R (Disc ID: MBI 01RG40)
I 17:21:31 Destination Media Supported Write Speeds: 3,3x; 4x; 6x; 8x
I 17:21:31 Destination Media Sectors: 2.298.496
I 17:21:31 Write Mode: DVD
I 17:21:31 Write Type: Incremental
I 17:21:31 Write Speed: 4x
I 17:21:31 Link Size: Auto
I 17:21:31 Lock Volume: Yes
I 17:21:31 Test Mode: No
I 17:21:31 OPC: Yes
I 17:21:31 BURN-Proof: Enabled
I 17:21:31 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x)
I 17:21:52 Filling Buffer... (80 MiB)
I 17:21:52 Writing LeadIn...
I 17:21:55 Writing Session 1 of 1... (1 Track, LBA: 0 - 1555711)
I 17:21:55 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1555711)
I 17:32:01 Synchronising Cache...
I 17:32:30 Closing Track...
I 17:32:35 Closing Session...
I 17:33:56 Exporting Graph Data...
I 17:33:56 Graph Data File: C:\Users\User\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_DVDWBD_TS-LB23D_SC02_22-SRPANJ-2014-_5-21_MBI_01RG40_4x.ibg
I 17:33:56 Export Successfully Completed!
I 17:33:56 Operation Successfully Completed! - Duration: 00:12:25
I 17:33:56 Average Write Rate: 5.134 KiB/s (3.8x) - Maximum Write Rate: 5.464 KiB/s (4.0x)
I 17:33:56 Cycling Tray before Verify...
W 17:34:10 Waiting for device to become ready...
I 17:36:25 Abort Request Acknowledged
E 17:36:25 Device Not Ready - Reason: Medium Not Present - Tray Closed
E 17:36:25 Operation Aborted!
I 17:36:40 Close Request Acknowledged
I 17:36:40 Closing Down...
I 17:36:41 Shutting down SPTI...
I 17:36:41 ImgBurn closed!

The last few lines are irrelevant anyway.

At the time it took 3 seconds to write the lead-in as opposed to most tries during which it takes 7 minutes or so for an error to show up in the log. As you may be able to tell, I have no idea what I did right back then... I was using the same brand from the same batch of DVDs. 

 

If anyone has tips I could use please let me know. I know many of you have a sharp eye for this kind of thing so hopefully there might be something I haven't tried yet. I appreciate the time!

Edited by izanami
Link to comment
Share on other sites

Your drive doesn't appear to like the discs you're trying to use. Return the settings to their default values and buy some different discs.

 

Hi and thank you for replying to my thread! I'll be sure to do that though which brand? Verbatim? I tried googling this drive earlier on and the results stated little as to which brands it liked and which not... I seem to be in a pickle here, hmm. 

 

EDIT: Oh and congratulations on the prince turning 1! Wasn't that yesterday though.

Edited by izanami
Link to comment
Share on other sites

Yes, try some Verbatim or Taiyo Yuden (JVC) discs.

 

Mhm, I see Verbatim DVD-R spindles are for sale nearby. They look like these: https://www.mediaprostore.com/images/product_images/popup_images/1858_0__1387_dvd-r-verbatim-ls-cake.jpg

 

So, will burning at 4x yield better results than burning at 8x? I could use the extra longevity with my discs.

 

EDIT: Tried writing to a spare Philips DVD+R DL... it works. I guess my drive doesn't like this particular brand after all. Hopefully Verbatims will cut it.

Edited by izanami
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.