Jump to content

Closing Track Failed! - Reason: The device is not connected.


birdman42

Recommended Posts

Hi, 

So I am using a Sony Optiarc 5280s and have gotten some burns from it, and they work fine, but most of the time the device will be "removed" at the closing track section. Obviously I'm not unplugging the drive but when ever it reaches that point it refuses to connect with the drive. Been searching the interwebs but cant find anyone with the same problem. Please help the coasters are pilling up. Im using verbatim disks with default settings and just bought a new usb to sata cable.

 

 

I 23:21:57 ImgBurn Version 2.5.7.0 started!

I 23:21:57 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)

I 23:21:57 Total Physical Memory: 6,084,208 KB  -  Available: 4,198,080 KB

I 23:21:58 Initialising SPTI...

I 23:21:58 Searching for SCSI / ATAPI devices...

I 23:21:58 -> Drive 1 - Info: hp DVD RAM UJ897 1.00 (E:) (ATAPI)

I 23:21:58 -> Drive 2 - Info: Optiarc DVD RW AD-5280S 1.Z8 (U:) (USB)

I 23:21:58 Found 1 DVD±RW and 1 DVD±RW/RAM!

I 23:23:03 Operation Started!

I 23:23:03 Source File: C:\Users\username\Xbox 360 Games\Assassins.Creed.IV.Black.Flag.XBOX360-COMPLEX\DVD1\complex-ac4.bf.d1.dvd

I 23:23:03 Source File Sectors: 4,267,015 (MODE1/2048)

I 23:23:03 Source File Size: 8,738,846,720 bytes

I 23:23:03 Source File Volume Identifier: DVD_ROM

I 23:23:03 Source File Volume Set Identifier: 4930000

I 23:23:03 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 23:23:03 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 23:23:03 Source File File System(s): ISO9660, UDF (1.50)

I 23:23:03 Destination Device: [0:0:0] Optiarc DVD RW AD-5280S 1.Z8 (U:) (USB)

I 23:23:03 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)

I 23:23:03 Destination Media Supported Write Speeds: 4x, 6x, 8x

I 23:23:03 Destination Media Sectors: 4,267,040

I 23:23:03 Write Mode: DVD

I 23:23:04 Write Type: DAO

I 23:23:04 Write Speed: 4x

I 23:23:04 DVD+R DL Reserve Track: No

I 23:23:04 Link Size: Auto

I 23:23:04 Lock Volume: Yes

I 23:23:04 Test Mode: No

I 23:23:04 OPC: No

I 23:23:04 BURN-Proof: Enabled

I 23:23:04 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

I 23:23:04 Book Type Setting: DVD-ROM

I 23:23:04 Optimal L0 Data Zone Capacity: 2,133,520

I 23:23:04 Optimal L0 Data Zone Method: Copied From Original Disc

I 23:23:09 Set L0 Data Zone Capacity Succeeded!

I 23:23:10 Filling Buffer... (512 MB)

I 23:23:17 Writing LeadIn...

I 23:23:20 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)

I 23:23:20 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)

I 23:23:20 Writing Layer 0... (LBA: 0 - 2133519)

I 23:36:46 Writing Layer 1... (LBA: 2133520 - 4267014)

I 23:50:23 Synchronising Cache...

I 23:50:24 Closing Track...

W 23:50:25 Device Removal Detected!

W 23:50:25 The device list will be refreshed at the next available opportunity.

W 23:50:25 Potential 'WaitImmediateIO' Deferred Error - (0/3) - The semaphore timeout period has expired.

W 23:50:25 Close Track Failed! - Reason: The semaphore timeout period has expired.

W 23:50:25 Retrying (1 of 3)...

W 23:50:25 Retry Failed - Reason: The device is not connected.

W 23:50:25 Retrying (2 of 3)...

W 23:50:25 Retry Failed - Reason: The device is not connected.

W 23:50:25 Retrying (3 of 3)...

W 23:50:25 Retry Failed - Reason: The device is not connected.

W 23:50:59 Device Removal Detected!

W 23:50:59 The device list will be refreshed at the next available opportunity.

W 23:51:24 Device Removal Detected!

W 23:51:24 The device list will be refreshed at the next available opportunity.

W 23:51:51 Device Removal Detected!

W 23:51:51 The device list will be refreshed at the next available opportunity.

I 23:51:58 Finalising Disc...

W 23:51:58 Finalise Disc Failed! - Reason: The device is not connected.

W 23:51:58 Retrying (1 of 3)...

W 23:51:58 Retry Failed - Reason: The device is not connected.

W 23:51:58 Retrying (2 of 3)...

W 23:51:58 Retry Failed - Reason: The device is not connected.

W 23:51:58 Retrying (3 of 3)...

W 23:51:58 Retry Failed - Reason: The device is not connected.

W 23:52:26 Device Removal Detected!

W 23:52:26 The device list will be refreshed at the next available opportunity.

W 23:52:58 Device Removal Detected!

W 23:52:58 The device list will be refreshed at the next available opportunity.

I 23:53:14 Exporting Graph Data...

I 23:53:14 Graph Data File: C:\Users\pascal\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-5280S_1.Z8_SUNDAY-AUGUST-03-2014_11-23_PM_MKM-003-00_4x.ibg

I 23:53:14 Export Successfully Completed!

I 23:53:14 Operation Successfully Completed! - Duration: 00:30:10

I 23:53:14 Average Write Rate: 5,258 KB/s (3.8x) - Maximum Write Rate: 5,598 KB/s (4.0x)

I 23:53:14 Cycling Tray before Verify...

W 23:53:16 Waiting for device to become ready...

W 23:53:19 Device Removal Detected!

W 23:53:19 The device list will be refreshed at the next available opportunity.

W 23:55:40 Device Removal Detected!

W 23:55:40 The device list will be refreshed at the next available opportunity.

 

-Thanks P

Edited by birdman42
Link to comment
Share on other sites

Something is going on with the communication between the drive and the port connected.

 

This error is usualy a problem with the USB adapter/controller or could be a faulty cable.

 

Try other ports available or another cable/adapter.

Link to comment
Share on other sites

I just recently bought a new cable because someone else suggested this as the problem. However it is one of the cheaper ones on  eBay ($3), is It not high enough quality for reliable burns.

 

What would you recommend?

Edited by birdman42
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.