Jump to content

Disk burning help


oceans

Recommended Posts

i have recently flashed my xbox and have been making attempts to burn games, all three attempts have failed in the same manor. Both games run fine through abgx. It is when the disc is finalising it stops at 99% it fails.. When i try to run them on my xbox they all come up mixed media disk. I try run the disks through kprobe but nothing shows up.

 

I am using an ihas 124 e with the proper verbatim disks. Is it a drive problem or have i possibly failed to flash the xbox? anyway here is the img burn for the most recent one. any help would be greatly appreciated.

 

I 15:00:09 ImgBurn Version 2.5.8.0 started!

I 15:00:09 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200)
I 15:00:09 Total Physical Memory: 8,379,064 KiB - Available: 6,763,960 KiB
I 15:00:09 Initialising SPTI...
I 15:00:09 Searching for SCSI / ATAPI devices...
I 15:00:09 -> Drive 1 - Info: ATAPI iHAS124 E 4L08 (Eicon_e_smile.gif (RAID)
I 15:00:09 Found 1 DVD±RW/RAM!
I 15:00:57 Operation Started!
I 15:00:57 Source File: C:\Sniper.Elite.III.XBOX360-COMPLEX\complex-sniper.elite.3.dvd
I 15:00:57 Source File Sectors: 4,267,015 (MODE1/2048)
I 15:00:57 Source File Size: 8,738,846,720 bytes
I 15:00:57 Source File Volume Identifier: DVD_ROM
I 15:00:57 Source File Volume Set Identifier: 46f44000MS UDFBridge
I 15:00:57 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 15:00:57 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 15:00:57 Source File File System(s): ISO9660, UDF (1.50)
I 15:00:57 Destination Device: [0:1:0] ATAPI iHAS124 E 4L08 (Eicon_e_smile.gif (RAID)
I 15:00:57 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 15:00:58 Destination Media Supported Write Speeds: 4x, 6x, 8x
I 15:00:58 Destination Media Sectors: 4,267,040
I 15:00:58 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes)
I 15:00:58 Write Mode: DVD
I 15:00:58 Write Type: DAO
I 15:00:58 Write Speed: 2.4x
I 15:00:58 DVD+R DL Reserve Track: No
I 15:00:58 Link Size: Auto
I 15:00:58 Lock Volume: Yes
I 15:00:58 Test Mode: No
I 15:00:58 OPC: No
I 15:00:58 BURN-Proof: Enabled
W 15:00:58 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x)
W 15:00:58 The drive only supports writing these discs at 4x, 6x, 8x.
I 15:00:58 Book Type Setting: DVD-ROM
I 15:00:58 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 15:00:58 Optimal L0 Data Zone Capacity: 2,133,520
I 15:00:58 Optimal L0 Data Zone Method: Copied From Original Disc
I 15:00:58 Set L0 Data Zone Capacity Succeeded!
I 15:00:58 L0 Data Zone Capacity - Effective: 2,133,520
I 15:00:58 Filling Buffer... (80 MiB)
I 15:00:59 Writing LeadIn...
I 15:01:28 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 15:01:29 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 15:01:29 Writing Layer 0... (LBA: 0 - 2133519)
I 15:06:19 Writing Layer 1... (LBA: 2133520 - 4267014)
I 15:11:08 Synchronising Cache...
I 15:11:09 Closing Track...
I 15:11:12 Finalising Disc...
I 15:14:46 Exporting Graph Data...
I 15:14:46 Graph Data File: C:\Users\User\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_E_4L08_10-AUGUST-2014_15-00_MKM-003-00_2.4x.ibg
I 15:14:46 Export Successfully Completed!
I 15:14:46 Operation Successfully Completed! - Duration: 00:13:48
I 15:14:46 Average Write Rate: 14,739 KiB/s (10.9x) - Maximum Write Rate: 14,965 KiB/s (11.1x)
I 15:14:46 Cycling Tray before Verify...
I 15:14:53 Device Ready!
E 15:14:53 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0)
E 15:14:53 Verify Failed! - Reason: Layouts do not match.

 

Edit: I just noticed the disks that are burned have a dark ring around the centre of the shiny side, its quite faint but its definitely there. I have just bought this drive is there a chance its broken

 

 

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.