Jump to content
Sign in to follow this  
midlifcrisis

Device is not ready when finalizing disc starts ( says device is removed )

Recommended Posts

I 00:43:13 ImgBurn Version 2.5.8.0 started!

I 00:43:13 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200)

I 00:43:13 Total Physical Memory: 5,466,376 KiB  -  Available: 3,562,236 KiB

I 00:43:13 Initialising SPTI...

I 00:43:13 Searching for SCSI / ATAPI devices...

I 00:43:13 -> Drive 1 - Info: Optiarc DVD RW AD-5280S 1.Z8 (F:) (USB 2.0)

I 00:43:13 Found 1 DVD±RW!

I 00:43:28 Operation Started!

I 00:43:28 Source File: C:\Users\Jon\Downloads\Burned Games\The Evil Within\The Evil Within.dvd

I 00:43:28 Source File Sectors: 4,267,015 (MODE1/2048)

I 00:43:28 Source File Size: 8,738,846,720 bytes

I 00:43:28 Source File Volume Identifier: DVD_ROM

I 00:43:28 Source File Volume Set Identifier: 84f54000MS UDFBridge

I 00:43:28 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 00:43:28 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 00:43:28 Source File File System(s): ISO9660, UDF (1.50)

I 00:43:28 Destination Device: [0:0:0] Optiarc DVD RW AD-5280S 1.Z8 (F:) (USB)

I 00:43:28 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66)

I 00:43:28 Destination Media Supported Write Speeds: 4x, 6x, 8x

I 00:43:28 Destination Media Sectors: 4,267,040

I 00:43:28 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes)

I 00:43:28 Write Mode: DVD

I 00:43:28 Write Type: DAO

I 00:43:28 Write Speed: 4x

I 00:43:28 DVD+R DL Reserve Track: No

I 00:43:28 Link Size: Auto

I 00:43:28 Lock Volume: Yes

I 00:43:28 Test Mode: No

I 00:43:28 OPC: Yes

I 00:43:28 BURN-Proof: Enabled

I 00:43:28 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

I 00:43:28 Book Type Setting: DVD-ROM

I 00:43:33 Optimal L0 Data Zone Capacity: 2,133,520

I 00:43:33 Optimal L0 Data Zone Method: Copied From Original Disc

I 00:43:35 Set L0 Data Zone Capacity Succeeded!

I 00:43:35 L0 Data Zone Capacity - Effective: 2,133,520

I 00:43:36 Filling Buffer... (80 MiB)

I 00:43:37 Writing LeadIn...

I 00:43:40 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)

I 00:43:40 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)

I 00:43:40 Writing Layer 0... (LBA: 0 - 2133519)

I 00:57:03 Writing Layer 1... (LBA: 2133520 - 4267014)

I 01:10:36 Synchronising Cache...

I 01:10:37 Closing Track...

W 01:10:49 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - The semaphore timeout period has expired.

W 01:10:49 Close Track Failed! - Reason: The semaphore timeout period has expired.

W 01:10:50 Retrying (1 of 3)...

W 01:10:50 Retry Failed - Reason: The device is not connected.

W 01:10:50 Retrying (2 of 3)...

W 01:10:50 Retry Failed - Reason: The device is not connected.

W 01:10:50 Retrying (3 of 3)...

W 01:10:50 Retry Failed - Reason: The device is not connected.

W 01:10:50 Device Removal Detected!

W 01:10:50 The device list will be refreshed at the next available opportunity.

W 01:11:07 Retrying (4)...

W 01:11:07 Retry Failed - Reason: The device is not connected.

W 01:11:08 Retrying (5)...

W 01:11:08 Retry Failed - Reason: The device is not connected.

W 01:11:09 Retrying (6)...

W 01:11:09 Retry Failed - Reason: The device is not connected.

W 01:11:37 Retrying (7)...

W 01:11:37 Retry Failed - Reason: The device is not connected.

W 01:11:38 Retrying (8)...

W 01:11:38 Retry Failed - Reason: The device is not connected.

W 01:11:39 Retrying (9)...

W 01:11:39 Retry Failed - Reason: The device is not connected.

W 01:11:39 Retrying (10)...

W 01:11:39 Retry Failed - Reason: The device is not connected.

W 01:11:39 Retrying (11)...

W 01:11:39 Retry Failed - Reason: The device is not connected.

W 01:11:40 Retrying (12)...

W 01:11:40 Retry Failed - Reason: The device is not connected.

W 01:11:40 Retrying (13)...

W 01:11:40 Retry Failed - Reason: The device is not connected.

W 01:11:40 Retrying (14)...

W 01:11:40 Retry Failed - Reason: The device is not connected.

W 01:11:40 Retrying (15)...

W 01:11:40 Retry Failed - Reason: The device is not connected.

W 01:11:40 Retrying (16)...

W 01:11:40 Retry Failed - Reason: The device is not connected.

W 01:11:40 Retrying (17)...

W 01:11:40 Retry Failed - Reason: The device is not connected.

W 01:11:41 Retrying (18)...

W 01:11:41 Retry Failed - Reason: The device is not connected.

W 01:11:41 Retrying (19)...

W 01:11:41 Retry Failed - Reason: The device is not connected.

W 01:11:41 Retrying (20)...

W 01:11:41 Retry Failed - Reason: The device is not connected.

W 01:11:41 Retrying (21)...

W 01:11:41 Retry Failed - Reason: The device is not connected.

W 01:11:41 Retrying (22)...

W 01:11:41 Retry Failed - Reason: The device is not connected.

W 01:11:41 Retrying (23)...

W 01:11:41 Retry Failed - Reason: The device is not connected.

W 01:11:42 Retrying (24)...

W 01:11:42 Retry Failed - Reason: The device is not connected.

W 01:11:42 Retrying (25)...

W 01:11:42 Retry Failed - Reason: The device is not connected.

W 01:11:42 Retrying (26)...

W 01:11:42 Retry Failed - Reason: The device is not connected.

W 01:11:42 Retrying (27)...

W 01:11:42 Retry Failed - Reason: The device is not connected.

W 01:11:42 Retrying (28)...

W 01:11:42 Retry Failed - Reason: The device is not connected.

W 01:11:42 Retrying (29)...

W 01:11:42 Retry Failed - Reason: The device is not connected.

W 01:11:42 Retrying (30)...

W 01:11:42 Retry Failed - Reason: The device is not connected.

W 01:11:51 Retrying (31)...

W 01:11:51 Retry Failed - Reason: The device is not connected.

W 01:11:57 Retrying (32)...

W 01:11:57 Retry Failed - Reason: The device is not connected.

W 01:12:22 Retrying (33)...

W 01:12:22 Retry Failed - Reason: The device is not connected.

W 01:12:23 Retrying (34)...

W 01:12:23 Retry Failed - Reason: The device is not connected.

I 01:13:03 Finalising Disc...

W 01:13:03 Finalise Disc Failed! - Reason: The device is not connected.

W 01:13:03 Retrying (1 of 3)...

W 01:13:03 Retry Failed - Reason: The device is not connected.

W 01:13:03 Retrying (2 of 3)...

W 01:13:03 Retry Failed - Reason: The device is not connected.

W 01:13:03 Retrying (3 of 3)...

W 01:13:03 Retry Failed - Reason: The device is not connected.

W 01:13:05 Retrying (4)...

W 01:13:05 Retry Failed - Reason: The device is not connected.

I 01:13:08 Exporting Graph Data...

I 01:13:09 Graph Data File: C:\Users\Jon\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-5280S_1.Z8_TUESDAY-OCTOBER-21-2014_12-43_AM_RITEK-S04-66_4x.ibg

I 01:13:09 Export Successfully Completed!

I 01:13:09 Operation Successfully Completed! - Duration: 00:29:40

I 01:13:09 Average Write Rate: 5,284 KiB/s (3.9x) - Maximum Write Rate: 5,565 KiB/s (4.1x)

I 01:13:09 Cycling Tray before Verify...

W 01:13:11 Waiting for device to become ready...

 

 

 

I've burned plenty of discs before and ive just recently come in contact with this error and it has caused about 7 coasters so far. i've been tweaking settings i've found online that are supposed to help prevent this and none have worked so far, any help would be great. currently i'm using a usb to sata on an external sony optiarc on my laptop

post-54077-0-52216500-1413873260_thumb.png

Share this post


Link to post
Share on other sites

You're getting a semaphore timeout... which is then causing windows to disconnect the drive.

 

There aren't really any settings to get around this, it's a hardware issue (between the USB ports and your adapter).

 

Try other USB ports, cables and adapters.

Share this post


Link to post
Share on other sites

So is there any way to determine what part is not working correctly? i think it may be the usb port but i dont want to try each one and get coasters each time. i did replace the sata cable though because i had another one laying around. I just don't want to get another molex and sata to usb cable if its not needed.

Share this post


Link to post
Share on other sites

I looked at previous logs of some burns i did months ago and compared them to the failed burns i've been attempting lately, and basically the only differences is that i updated from 2.5.5 to 2.5.8 and that when i plug my external drive in it now comes up as USB 2.0 instead of just USB. I'm not sure if either of this factors play a role in the failed burns but they are the only differences i noticed in the logs

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.