mFuSE Posted October 28, 2014 Share Posted October 28, 2014 Hello, I'm trying to burn an DVD-DL image to a Verbatim DVD+DL disk. I have 3 devices (BH16NS40 1.03-A0, SH-B123L SB04, AD-7640S HD18), only with the Optiarc DVD+-RW AD-7640S i can change the book type at all ... But I'm not sure .. is the burned disk really in the format DVD-Rom? I'm not sure how to interpret the following status window after the burn was complete: Optiarc DVD+-RW AD-7640S HD18 (SATA)Current Profile: DVD+R DL Disc Information: Status: Complete State of Last Session: Complete Erasable: No Sessions: 1 Sectors: 2.851.120 Size: 5.839.093.760 bytes Time: 633:36:70 (MM:SS:FF) MID: MKM-003-00 Supported Write Speeds: 2,4x; 4x DVD±R DL Boundary Information: L0 Data Zone Capacity: 1.425.568 Changeable: No TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 2851119) -> LeadOut (LBA: 2851120) Disc Control Blocks Information: Optiarc Physical Format Information (ADIP - L0): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120 mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 16.580.607 Last Physical Sector in Layer 0: 2.283.519 Physical Format Information (ADIP - L1): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120 mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 16.580.607 Last Physical Sector in Layer 0: 2.283.519 Physical Format Information (Last Recorded - L0): Disc ID: MKM-003-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120 mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 16.580.591 Last Physical Sector in Layer 0: 1.622.175 Physical Format Information (Last Recorded - L1): Disc ID: MKM-003-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120 mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 16.580.591 Last Physical Sector in Layer 0: 1.622.175 Layer Information: Layer 0 Sectors: 1.425.568 (50%) Layer 1 Sectors: 1.425.552 (50%) Performance (Write Speed): Descriptor 1... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 2851119 (0x002B812F) -> RS: 3.462 KB/s (2,5x) - WS: 3.324 KB/s (2,4x) Descriptor 2... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 2851119 (0x002B812F) -> RS: 3.462 KB/s (2,5x) - WS: 5.540 KB/s (4x) May I have to try a different burner? ... But which one? :-( This disc is still not accepted by my application as a valid disc Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 28, 2014 Share Posted October 28, 2014 'Physical format information - last recorded' is the one to look at, and that says 'book type: dvdrom'. Link to comment Share on other sites More sharing options...
mFuSE Posted October 29, 2014 Author Share Posted October 29, 2014 hello, thank you, so it's an image/reader problem and not with imageburn :-) Link to comment Share on other sites More sharing options...
mFuSE Posted November 2, 2014 Author Share Posted November 2, 2014 Found the problem: I disassembled my whole unit (RNS 510, just in case anybody get the same problem) - disassembled the CD/DVD drive also - and cleaned the lens with "Hama CD/DVD cleaning spray" .... eh voila! ... It's working .... So an error can also be just a dirty reading unit ... and searching for an burn error can drive you crazy... especially when there is none ... Link to comment Share on other sites More sharing options...
Recommended Posts