Jump to content
Sign in to follow this  
isevs

Layout doesn't match after formatting and burning if Verify is on

Recommended Posts

Hello, 

know anyone this Problem:

After the formatting an Burning-Session the Verify has failed with the following text:

"Layout doesn't match..."

I have try it with    TDK R+   and   Medion + Rewrite.

 

The Protokoll (i am using XP):

---------------------------------

Optiarc DVD RW AD-7170A 1.04 (ATA)
Current Profile: DVD+RW
 
Disc Information:
Status: Empty
State of Last Session: Empty
Erasable: Yes
Formatted: No
Free Sectors: 2.295.104
Free Space: 4.700.372.992 bytes
Free Time: 510:03:29 (MM:SS:FF)
Next Writable Address: 0
Supported Write Speeds: 2,4x; 4x
 
Physical Format Information (ADIP):
Disc ID: PHILIPS-041-00
Book Type: DVD+RW
Part Version: 2
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 2.491.711
Last Physical Sector in Layer 0: 0
 
Physical Format Information (Last Recorded):
Disc ID: PHILIPS-041-00
Book Type: DVD+RW
Part Version: 2
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 2.491.711
Last Physical Sector in Layer 0: 0
 
Format Capacities:
DT: 0x01 - NB: 2295104 (0x00230540) - TDP: 2048
FT: 0x26 - NB: 2295104 (0x00230540) - TDP: 0
 
Performance (Write Speed):
Descriptor 1...
-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 2295104 (0x00230540)
-> RS: 6.925 KB/s (5x) - WS: 3.324 KB/s (2,4x)
Descriptor 2...
-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 2295104 (0x00230540)
-> RS: 6.925 KB/s (5x) - WS: 5.540 KB/s (4x)

---------------------------------

Share this post


Link to post
Share on other sites

If it's still showing up as being totally empty after being formatted, your drive must have an issue with the disc. Check the drives firmware is up to date and perhaps give it a clean with a cleaning disc.

Share this post


Link to post
Share on other sites

have I search for the Firmware-Version in the regedit? 

Or which is the shortest way to find it?

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.