Jump to content

ImgBurn Support Forum uses cookies. Read the Privacy Policy for more info. To remove this message, please click the button to the right:    I accept the use of cookies

Photo

Hangs at cycling tray before verify (2)



  • Please log in to reply
4 replies to this topic

#1 agtva

agtva

    ISF Newbie

  • Members
  • Pip
  • 3 posts
  • Location:France

Posted 24 March 2015 - 10:49 AM

I have very often the same problem as described below in the same topic.

 

The message in the main window is :

"Waiting for Read Thread (Device)...

 

and ImgBurn never ends. I have to restart the PC to open the tray ...

Thanks.

 

 The ImgBurn Log :

 

I 11:12:23 ImgBurn Version 2.5.8.0 started!
I 11:12:23 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
I 11:12:23 Total Physical Memory: 8 364 868 KiB  -  Available: 5 374 760 KiB
I 11:12:23 Initialising SPTI...
I 11:12:23 Searching for SCSI / ATAPI devices...
I 11:12:24 -> Drive 1 - Info: HL-DT-ST BD-RE  BH10LS30 1.01-A0 (I:) (SATA)
I 11:12:24 -> Drive 2 - Info: HL-DT-ST BD-RE  BH10LS30 1.01-A0 (J:) (SATA)
I 11:12:24 -> Drive 3 - Info: HL-DT-ST DVD-RAM GH22NS30 2.00 (M:) (SATA)
I 11:12:25 -> Drive 4 - Info: HL-DT-ST DVDRAM GH20NS15 IL00-04 (N:) (SATA)
I 11:12:25 Found 2 DVD±RW/RAMs and 2 BD-REs!
I 11:13:33 Operation Started!
I 11:13:33 Building Image Tree...
I 11:13:33 Calculating Totals...
I 11:13:33 Preparing Image...
I 11:13:34 Contents: 64 Files, 16 Folders
I 11:13:34 Content Type: BD Video
I 11:13:34 Data Type: MODE1/2048
I 11:13:34 File System(s): UDF (2.50)
I 11:13:34 Volume Label: [Not Configured]
I 11:13:34 Size: 19 791 203 677 bytes
I 11:13:34 Sectors: 9 663 709
I 11:13:34 Image Size: 19 792 527 360 bytes
I 11:13:34 Image Sectors: 9 664 320
I 11:13:34 Operation Successfully Completed! - Duration: 00:00:00
I 11:13:43 Operation Started!
I 11:13:43 Building Image Tree...
I 11:13:56 Calculating Totals...
I 11:13:56 Preparing Image...
I 11:13:56 Contents: 64 Files, 16 Folders
I 11:13:56 Content Type: BD Video
I 11:13:56 Data Type: MODE1/2048
I 11:13:56 File System(s): UDF (2.50)
I 11:13:56 Volume Label: NYEC_96
I 11:13:56 Size: 19 791 203 677 bytes
I 11:13:56 Sectors: 9 663 709
I 11:13:56 Image Size: 19 792 527 360 bytes
I 11:13:56 Image Sectors: 9 664 320
I 11:13:58 Operation Successfully Completed! - Duration: 00:00:15
I 11:13:58 Operation Started!
I 11:13:58 Source File: -==/\/[BUILD IMAGE]\/\==-
I 11:13:58 Source File Sectors: 9 664 320 (MODE1/2048)
I 11:13:58 Source File Size: 19 792 527 360 bytes
I 11:13:58 Source File Volume Identifier: NYEC_96
I 11:13:58 Source File Volume Set Identifier: 467859B50093769D
I 11:13:58 Source File Application Identifier: ImgBurn v2.5.8.0
I 11:13:58 Source File Implementation Identifier: ImgBurn
I 11:13:58 Source File File System(s): UDF (2.50)
I 11:13:58 Destination Device: [2:0:0] HL-DT-ST BD-RE  BH10LS30 1.01 (I:) (SATA)
I 11:13:58 Destination Media Type: BD-R (Disc ID: CMCMAG-BA5-000)
I 11:13:58 Destination Media Supported Write Speeds: 2x; 4x; 6x; 8x
I 11:13:58 Destination Media Sectors: 12 219 392
I 11:13:58 Write Mode: BD
I 11:13:58 Write Type: DAO
I 11:13:58 Write Speed: 8x
I 11:13:59 Hardware Defect Management Active: No
I 11:13:59 BD-R Verify Not Required: Yes
I 11:13:59 Link Size: Auto
I 11:13:59 Lock Volume: Yes
I 11:13:59 Test Mode: No
I 11:13:59 OPC: No
I 11:13:59 BURN-Proof: Enabled
I 11:13:59 Write Speed Successfully Set! - Effective: 35 964 KB/s (8x)
I 11:14:15 Filling Buffer... (40 MiB)
I 11:14:15 Writing LeadIn...
I 11:14:16 Writing Session 1 of 1... (1 Track, LBA: 0 - 9664319)
I 11:14:16 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 9664319)
I 11:25:15 Synchronising Cache...
I 11:25:17 Closing Track...
I 11:25:18 Finalising Disc...
I 11:25:26 Exporting Graph Data...
I 11:25:26 Graph Data File: C:\Users\ALAIN\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.01_MARDI-24-MARS-2015_11-13_CMCMAG-BA5-000_8x.ibg
I 11:25:26 Export Successfully Completed!
I 11:25:26 Operation Successfully Completed! - Duration: 00:11:27
I 11:25:26 Average Write Rate: 29 374 KiB/s (6.7x) - Maximum Write Rate: 35 302 KiB/s (8.0x)
I 11:25:26 Cycling Tray before Verify...
W 11:25:36 Waiting for device to become ready...
I 11:25:49 Device Ready!
I 11:25:50 Operation Started!
I 11:25:50 Source Device: [2:0:0] HL-DT-ST BD-RE  BH10LS30 1.01 (I:) (SATA)
I 11:25:50 Source Media Type: BD-R (Disc ID: CMCMAG-BA5-000)
I 11:25:50 Source Media Supported Read Speeds: 4x; 4,8x
I 11:25:50 Source Media Supported Write Speeds: 2x; 4x; 6x; 8x
I 11:25:50 Source Media Sectors: 9 664 320
I 11:25:50 Source Media Size: 19 792 527 360 bytes
I 11:25:50 Image File: -==/\/[BUILD IMAGE]\/\==-
I 11:25:50 Image File Sectors: 9 664 320 (MODE1/2048)
I 11:25:50 Image File Size: 19 792 527 360 bytes
I 11:25:50 Image File Volume Identifier: NYEC_96
I 11:25:50 Image File Volume Set Identifier: 467859B50093769D
I 11:25:50 Image File Application Identifier: ImgBurn v2.5.8.0
I 11:25:50 Image File Implementation Identifier: ImgBurn
I 11:25:50 Image File File System(s): UDF (2.50)
I 11:25:50 Read Speed (Data/Audio): MAX / MAX
I 11:25:51 Read Speed - Effective: 2x - 3,6x; 3,6x - 4,8x
I 11:25:51 Verifying Session 1 of 1... (1 Track, LBA: 0 - 9664319)
I 11:25:51 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 9664319)
I 11:28:25 Abort Request Acknowledged
 

 



#2 LIGHTNING UK!

LIGHTNING UK!

    Author of ImgBurn

  • Admin
  • PipPipPipPipPip
  • 29,175 posts
  • Gender:Male
  • Location:United Kingdom

Posted 24 March 2015 - 01:12 PM

Sorry, I don't understand where yours is hanging. Is it hanging between the write and verify or is it hanging at the end of the verify operation where you've aborted the operation?

If it's hanging where you've aborted, the drive probably can't read the disc or your system has stopped processing I/O.

Go into Write mode, right click the destination drive drop down and select 'family tree'. Close the prompt that comes up and copy + paste everything from the log window please.

You should update the firmware on your drive too.

http://www.firmwarehq.com/LG/BH10LS30/files.html
Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!

Replies to posts belong in the forum where everyone can read them. Please don't PM them.

In fact, don't PM me at all unless it's something I've asked to be told about!

Before asking questions, search the forum to see if someone else already has.

Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!

#3 agtva

agtva

    ISF Newbie

  • Members
  • Pip
  • 3 posts
  • Location:France

Posted 24 March 2015 - 06:38 PM

Yes, it is hanging between the write and verify.

And impossible to finish the operation, I must restart the system.

 

I'm going tomorrow  to update the firmware. Thanks for the link.



#4 LIGHTNING UK!

LIGHTNING UK!

    Author of ImgBurn

  • Admin
  • PipPipPipPipPip
  • 29,175 posts
  • Gender:Male
  • Location:United Kingdom

Posted 24 March 2015 - 08:49 PM

I'd need to see the log (copy and paste if possible) and screenshot of the main+log windows at the point where you say it's hanging.

 

It makes no sense to hang and be waiting for the read thread there as it would never get to the tray cycling part if there was more data to read.

 

Also, please post the family tree info I requested.


Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!

Replies to posts belong in the forum where everyone can read them. Please don't PM them.

In fact, don't PM me at all unless it's something I've asked to be told about!

Before asking questions, search the forum to see if someone else already has.

Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!

#5 agtva

agtva

    ISF Newbie

  • Members
  • Pip
  • 3 posts
  • Location:France

Posted 25 March 2015 - 08:48 AM

Many thanks.

All my firmwares are now updated. I guess it's a good way to solve the problem.

Next time ImgBurn hangs (I don't hope so) I post a new answer.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users