Jump to content

Imgburn says the file is too big to burn


jasonco

Recommended Posts

Hello,

 

I've searched the forum, found similar problems, but haven't found an answer to my problem. I just started using imgburn. Working to get 3 different projects burned to disc. First went fine. The next 2 I'm getting an error saying the file is too big for the disc. Windows explorer says the files are 8.05GB and 8.12GB but imgburn says they are larger than 8.5GB. I went out and bought some VerbatimDVD+R DL because that was recommended. My drive is a TSST TS-H653G.  Any ideas on why this is would be appreciated.

 

 

I 13:51:16 ImgBurn Version 2.5.8.0 started!
I 13:51:16 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
I 13:51:16 Total Physical Memory: 8,386,740 KiB  -  Available: 3,585,844 KiB
I 13:51:16 Initialising SPTI...
I 13:51:16 Searching for SCSI / ATAPI devices...
I 13:51:19 -> Drive 1 - Info: TSSTcorp DVD+-RW TS-H653G D200 (E:) (ATA)
I 13:51:19 Found 1 DVD±RW/RAM!
I 13:51:50 Operation Started!
I 13:51:50 Building Image Tree...
I 13:51:50 Calculating Totals...
I 13:51:50 Preparing Image...
I 13:51:50 Contents: 11 Files, 13 Folders
I 13:51:50 Content Type: BD Video
I 13:51:50 Data Type: MODE1/2048
I 13:51:50 File System(s): UDF (2.50)
I 13:51:50 Volume Label: [Not Configured]
I 13:51:50 Size: 8,653,554,254 bytes
I 13:51:50 Sectors: 4,225,375
I 13:51:51 Image Size: 8,654,422,016 bytes
I 13:51:51 Image Sectors: 4,225,792
I 13:51:51 Operation Successfully Completed! - Duration: 00:00:00
I 13:52:14 Operation Started!
I 13:52:14 Building Image Tree...
I 13:52:15 Calculating Totals...
I 13:52:15 Preparing Image...
I 13:52:15 Contents: 11 Files, 13 Folders
I 13:52:15 Content Type: BD Video
I 13:52:15 Data Type: MODE1/2048
I 13:52:15 File System(s): UDF (2.50)
I 13:52:15 Volume Label: Despecialized.Edition.AVCHD.
I 13:52:15 Size: 8,653,554,254 bytes
I 13:52:15 Sectors: 4,225,375
I 13:52:15 Image Size: 8,654,422,016 bytes
I 13:52:15 Image Sectors: 4,225,792
I 13:52:17 Operation Successfully Completed! - Duration: 00:00:03
W 13:52:20 User accepted disc space warning and is attempting to overburn!
I 13:52:20 Operation Started!
I 13:52:20 Source File: -==/\/[bUILD IMAGE]\/\==-
I 13:52:20 Source File Sectors: 4,225,792 (MODE1/2048)
I 13:52:20 Source File Size: 8,654,422,016 bytes
I 13:52:20 Source File Volume Identifier: Despecialized.Edition.AVCHD.
I 13:52:20 Source File Volume Set Identifier: 46AF6E8700407AAF
I 13:52:20 Source File Application Identifier: ImgBurn v2.5.8.0
I 13:52:20 Source File Implementation Identifier: ImgBurn
I 13:52:20 Source File File System(s): UDF (2.50)
I 13:52:20 Destination Device: [1:0:0] TSSTcorp DVD+-RW TS-H653G D200 (E:) (ATA)
I 13:52:20 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00)
I 13:52:20 Destination Media Supported Write Speeds: 2.4x
I 13:52:20 Destination Media Sectors: 4,173,824
I 13:52:20 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes)
I 13:52:20 Write Mode: DVD
I 13:52:20 Write Type: DAO
I 13:52:20 Write Speed: MAX
I 13:52:20 DVD+R DL Reserve Track: No
I 13:52:20 Link Size: Auto
I 13:52:20 Lock Volume: Yes
I 13:52:20 Test Mode: No
I 13:52:20 OPC: No
I 13:52:20 BURN-Proof: Enabled
I 13:52:21 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)
I 13:52:21 Book Type Setting: DVD-ROM
W 13:52:24 Optimal layer break position exceeds L0 capacity.
W 13:52:24 Optimal L0 Sectors: 2,112,896
W 13:52:24 Maximum L0 Sectors: 2,086,912
I 13:52:25 Optimal L0 Data Zone Capacity: 2,112,896
I 13:52:25 Optimal L0 Data Zone Method: ECC Block Boundary
W 13:52:25 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List
E 13:53:51 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List
E 13:53:51 Operation Failed! - Duration: 00:01:31
I 13:53:51 Average Write Rate: N/A - Maximum Write Rate: N/A
 
Link to comment
Share on other sites

Maybe the Size On Disk value is too large?  For some weird reason, there are 2 different sizes returned by Windows Explorer.  Size On Disk is something that I think only shows up on Properties.  You might want to check the Properties of the movie file, if it's a movie file, or of the folder it's in in if it's a movie disc.  Therefore, Windows Explorer might not be returning the actual size.

 

 

And let's not get started on the size GB, GiB, MB, MiB, KB, KiB versus Bytes conflicting values of units of measurement.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.