igorx1967 Posted June 17, 2015 Share Posted June 17, 2015 HelloI get errors when writing BD-R DLDrive Pioneer 207M latest firmware from the site recommended ImgBurnImgBurn 2.5.8.0 versionCheck for BD-R DL Verbatim 50 Gb Japan with ebayDisks are herehttp://www.ebay.com/itm/300785928887?_trksid=p20578...RK%3AMEBIDX%3AITFrom the report after writing the review stage ......I 16:28:57 Read Speed (Data/Audio): MAX / MAXI 16:28:58 Read Speed - Effective: 3,3x - 8xI 16:28:58 Verifying Session 1 of 1... (1 Track, LBA: 0 - 15573919)I 16:28:58 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 15573919)I 16:28:58 Verifying Layer 0... (LBA: 0 - 12219391)I 16:45:27 Verifying Layer 1... (LBA: 12219392 - 15573919)W 17:12:00 Miscompare at LBA: 12220672, Offset: 0, File: \BDMV\STREAM\00004.m2tsW 17:12:00 Device: 0x00 (Empty Sector!)W 17:12:00 Image File: 0xFFW 17:12:00 Total Errors in Sector: 1 985I 17:12:00 Verifying Sectors...W 17:15:13 Miscompare at LBA: 12220673, Offset: 0, File: \BDMV\STREAM\00004.m2tsW 17:15:13 Device: 0x00 (Empty Sector!)W 17:15:13 Image File: 0x37W 17:15:14 Total Errors in Sector: 2 029I 17:15:14 Verifying Sectors...W 17:15:14 Miscompare at LBA: 12220674, Offset: 0, File: \BDMV\STREAM\00004.m2tsW 17:15:14 Device: 0x00 (Empty Sector!)..........W 17:15:24 Miscompare at LBA: 12220862, Offset: 0, File: \BDMV\STREAM\00004.m2tsW 17:15:24 Device: 0x00 (Empty Sector!)W 17:15:24 Image File: 0x38W 17:15:24 Total Errors in Sector: 2 046I 17:15:24 Verifying Sectors...W 17:15:24 Miscompare at LBA: 12220863, Offset: 0, File: \BDMV\STREAM\00004.m2tsW 17:15:24 Device: 0x00 (Empty Sector!)W 17:15:24 Image File: 0xD8W 17:15:24 Total Errors in Sector: 2 045I 17:15:24 Verifying Sectors...I 17:18:50 Exporting Graph Data...I 17:18:50 Graph Data File: C:\Users\Администратор\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-207M_1.60_6-ИЮНЬ-2015-Г-_15-28_MEI-T02-001_2x.ibgI 17:18:50 Export Successfully Completed!I 17:18:50 Operation Successfully Completed! - Duration: 00:49:52I 17:18:50 Average Verify Rate: 10 417 KiB/s (2.4x) - Maximum Verify Rate: 35 267 KiB/s (8.0x) I understand mistakes in the transition to the second layerThis is normal? Or you need to change the drive? As far as critical ?P.S. I tried to write the same content on the company's drive TDK BD-RE DL 50 Gb - No errors wereChinese pigs also writes without errors ImgBurn.log Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 19, 2015 Share Posted June 19, 2015 Make sure you're burning an image file rather than burning on the fly and then try a standalone verify if you get miscompare errors. Check and see if they're in the same place. It looks like the drive misread a block of data from the disc, or something else messed things up and that data never reached ImgBurn's buffer. Cleaning the drive with a cleaning disc may help if you say it's only verbatim discs that are giving you trouble. Link to comment Share on other sites More sharing options...
igorx1967 Posted June 19, 2015 Author Share Posted June 19, 2015 Thank LIGHTNING UK!To clean, I do not.I check the contents of the source hard disk and burn BD-R.Absolutely identical.Video plays smoothly and brakes.I am calm.Thanks again for your attention to my problem. Link to comment Share on other sites More sharing options...
Recommended Posts