thesoundsmith Posted August 12, 2015 Share Posted August 12, 2015 I use a Bravo SE to dup CDs. Previously, I made the masters from Nero, they include CD text Album, Artist and Sing Titles. They dup just fine.This time, I created a master with ImgBurn containung CD text as above, but adding individual pregap times. When I convert this to burn Cds, the timing is on the money, but the CD Text does NOT display.This may be a Primera issue, but I wonder if I am just missing something in the background setup.in Image Options or some such.I have no idea where to go to make this brnable, if anyone has experience (or just knows what is probably wrong0 I would be grateful. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted August 13, 2015 Share Posted August 13, 2015 Can you post the log from the burn / verification of the master you made please? Also, switch to Read mode and see if ImgBurn can see the cd text on the disc by clicking the media information button in the Source box. Link to comment Share on other sites More sharing options...
thesoundsmith Posted August 13, 2015 Author Share Posted August 13, 2015 (edited) Thanks for the reply. I will have to reburn the disk, and will post shortly Edited August 13, 2015 by thesoundsmith Link to comment Share on other sites More sharing options...
thesoundsmith Posted August 13, 2015 Author Share Posted August 13, 2015 OK, here's the CUE file and log. And the CD Text is visible to ImgBurn. Any ideas appreciated. Burn Log.txt David Kempton - Especially For Groovers.cue Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted August 13, 2015 Share Posted August 13, 2015 If ImgBurn can see it on the disc you burnt, I'm not sure how there can be a problem with it? It's either there or it isn't. Sorry, I'm not really sure what to say. Link to comment Share on other sites More sharing options...
thesoundsmith Posted August 13, 2015 Author Share Posted August 13, 2015 That's OK, I thought that would wind up being the case. I am wondering if there is something in the deeper setup in Options - I have Data Type MODE 1/2048, File System ISO9660+UDF and Recurse Subdirs checked. Should any of these be changed? If they are all correct, i have to talk to Primera, but I wanted to have all the ifo first. The burner DOES write CD text, just not from ImgBurn. Must be something basic. Thanks. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted August 13, 2015 Share Posted August 13, 2015 I thought you said ImgBurn could read the cd text on the disc you burnt? So it can burn and read it just fine. You're burning a cue, so none of the options you're talking about are relevant. Link to comment Share on other sites More sharing options...
thesoundsmith Posted August 14, 2015 Author Share Posted August 14, 2015 I burned a disc from the CUE, then had ImgBurn read it, which it did. That disk plays and displays fine, but will not duplicate properly It plays the correct precues but does not display text, ither titel or track. If I burn the tracks in Nero, it displays the text but will not allow individual pregap times. I am hoping that there is some setting that I have missed. But I can now talk to Primera about this issue with some confidence, so thanks. Link to comment Share on other sites More sharing options...
Recommended Posts