Jump to content

Verify Failed error :(


fokilpt

Recommended Posts

Tried to burn an ISO image to a disc was using 4x and it looked like it all went smooth until the Verify (I am using a semi-older Samsung Laptop) and after it ejected the disc I got a popup that said it could not manually put the disc back in (uneject?) so I did it myself and clicked OK

 

Well afterwards I got these errors:

E 01:13:19 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0)
E 01:13:19 Verify Failed! - Reason: Layouts do not match.
 
And upon looking at the disc nothing had change. Nothing was on the disc or anything. Here is the full log:
 
I 00:58:28 ImgBurn Version 2.5.8.0 started!
I 00:58:28 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200)
I 00:58:28 Total Physical Memory: 8,300,072 KiB  -  Available: 6,806,008 KiB
I 00:58:28 Initialising SPTI...
I 00:58:28 Searching for SCSI / ATAPI devices...
I 00:58:29 -> Drive 1 - Info: TSSTcorp CDDVDW TS-U633J SC01 (G:) (SATA)
I 00:58:29 Found 1 DVD±RW/RAM!
I 00:59:02 Operation Started!
I 00:59:02 Source File: C:\Users\fokil\Desktop\ASDF.ISO
I 00:59:02 Source File Sectors: 1,949,216 (MODE1/2048)
I 00:59:02 Source File Size: 3,991,994,368 bytes
I 00:59:02 Source File Volume Identifier: CD_ROM
I 00:59:02 Source File Volume Set Identifier: 42FA6ECE001DBE19
I 00:59:02 Source File Application Identifier: ImgBurn v2.5.8.0
I 00:59:02 Source File Implementation Identifier: ImgBurn
I 00:59:02 Source File File System(s): UDF (1.02)
I 00:59:02 Destination Device: [0:0:0] TSSTcorp CDDVDW TS-U633J SC01 (G:) (SATA)
I 00:59:02 Destination Media Type: DVD+R (Disc ID: RITEK-F16-01)
I 00:59:02 Destination Media Supported Write Speeds: 3x, 4x, 6x, 8x
I 00:59:02 Destination Media Sectors: 2,295,104
I 00:59:02 Write Mode: DVD
I 00:59:02 Write Type: DAO
I 00:59:02 Write Speed: 4x
I 00:59:02 DVD+R Reserve Track: No
I 00:59:02 Link Size: Auto
I 00:59:02 Lock Volume: Yes
I 00:59:02 Test Mode: No
I 00:59:02 OPC: No
I 00:59:02 BURN-Proof: Enabled
I 00:59:02 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 00:59:02 Book Type Setting: DVD-ROM
I 00:59:02 Filling Buffer... (80 MiB)
I 00:59:02 Writing LeadIn...
I 00:59:27 Writing Session 1 of 1... (1 Track, LBA: 0 - 1949215)
I 00:59:27 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1949215)
I 01:12:04 Synchronising Cache...
I 01:12:13 Closing Track...
I 01:12:18 Finalising Disc...
I 01:12:41 Exporting Graph Data...
I 01:12:41 Graph Data File: C:\Users\fokil\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_TS-U633J_SC01_SATURDAY-NOVEMBER-28-2015_12-59_AM_RITEK-F16-01_4x.ibg
I 01:12:41 Export Successfully Completed!
I 01:12:41 Operation Successfully Completed! - Duration: 00:13:39
I 01:12:41 Average Write Rate: 5,156 KiB/s (3.8x) - Maximum Write Rate: 5,469 KiB/s (4.0x)
I 01:12:41 Cycling Tray before Verify...
W 01:12:57 Waiting for device to become ready...
I 01:13:19 Device Ready!
E 01:13:19 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0)
E 01:13:19 Verify Failed! - Reason: Layouts do not match.
 
 
 
I am trying again at 3x write speed. Will update but I am guessing the same thing will happen. I have a question though, at the top it says Windows 8 but I have Windows 10. Could this be a problem?

 

Link to comment
Share on other sites

Same problem with 3x.. I don't know what to do :(

 

 

I 01:21:31 Operation Started!
I 01:21:31 Source File: C:\Users\fokil\Desktop\ASDF.ISO
I 01:21:31 Source File Sectors: 1,949,216 (MODE1/2048)
I 01:21:31 Source File Size: 3,991,994,368 bytes
I 01:21:31 Source File Volume Identifier: CD_ROM
I 01:21:31 Source File Volume Set Identifier: 42FA6ECE001DBE19
I 01:21:31 Source File Application Identifier: ImgBurn v2.5.8.0
I 01:21:31 Source File Implementation Identifier: ImgBurn
I 01:21:31 Source File File System(s): UDF (1.02)
I 01:21:31 Destination Device: [0:0:0] TSSTcorp CDDVDW TS-U633J SC01 (G:) (SATA)
I 01:21:31 Destination Media Type: DVD+R (Disc ID: RITEK-F16-01)
I 01:21:32 Destination Media Supported Write Speeds: 3x, 4x, 6x, 8x
I 01:21:32 Destination Media Sectors: 2,295,104
I 01:21:32 Write Mode: DVD
I 01:21:32 Write Type: DAO
I 01:21:32 Write Speed: 3x
I 01:21:32 DVD+R Reserve Track: No
I 01:21:32 Link Size: Auto
I 01:21:32 Lock Volume: Yes
I 01:21:32 Test Mode: No
I 01:21:32 OPC: No
I 01:21:32 BURN-Proof: Enabled
I 01:21:32 Write Speed Successfully Set! - Effective: 4,155 KB/s (3x)
I 01:21:32 Book Type Setting: DVD-ROM
I 01:21:32 Filling Buffer... (80 MiB)
I 01:21:32 Writing LeadIn...
I 01:21:58 Writing Session 1 of 1... (1 Track, LBA: 0 - 1949215)
I 01:21:58 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1949215)
I 01:37:12 Synchronising Cache...
I 01:37:20 Closing Track...
I 01:37:25 Finalising Disc...
I 01:37:45 Exporting Graph Data...
I 01:37:45 Graph Data File: C:\Users\fokil\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_TS-U633J_SC01_SATURDAY-NOVEMBER-28-2015_1-21_AM_RITEK-F16-01_3x.ibg
I 01:37:45 Export Successfully Completed!
I 01:37:45 Operation Successfully Completed! - Duration: 00:16:13
I 01:37:45 Average Write Rate: 4,269 KiB/s (3.2x) - Maximum Write Rate: 4,473 KiB/s (3.3x)
I 01:37:45 Cycling Tray before Verify...
W 01:37:59 Waiting for device to become ready...
I 01:38:22 Device Ready!
E 01:38:22 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0)
E 01:38:22 Verify Failed! - Reason: Layouts do not match.
Link to comment
Share on other sites

You drive appears to be going through the motions of burning the disc but it's then unable to read anything on it once it's finished and the tray has been cycled.

 

If you go back into Write mode and put that burnt disc back in, does it still think the disc is empty?

 

Try cleaning the drive with a cleaning disc and / or try with different discs.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.